stack sampling Equipment available in Lesotho

Available in Lesotho| Near Lesotho
35 Results found

We couldn't find any stack sampling equipment in Lesotho

Here is a list of results available in Lesotho

Current filtering criteria

You can remove a filter by clicking on the x
  • Category: Monitoring & Testing ×

  • Subcategory: Environmental Sampling ×

  • Keyword: stack sampling ×

  • Available in: Africa ×

  • Available in: Lesotho ×

HI-Q - Stack Sampling System Design

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard ...

EPA Method - Model 16a - Basic Stack Sampling System

by Keika Ventures, LLC (KV)     based in Chapel Hill, NORTH CAROLINA (USA)

Method 16a - Determination of Total Reduced Sulfur Emissions from Stationary Sources. This manual method has been replaced by more automated systems in the U.S., but is still frequently requested from samplers outside the U.S. so we have decided to provide a listing of the component pieces needed for this system.

Westech - Model MST - Manual Stack Sampling Train

by Westech Scientific Instruments (Westech)     based in Upper Stondon, UNITED KINGDOM

Westech Scientific Instruments (Westech) provides a complete range of Manual Stack Trains for isokinetic and gas sampling of emissions to determine all major emitted pollutants. The standard equipment is modified to meet all current European legislation and requirements and will still comply with existing USEPA methods. A complete range of ...

Protea - Unheated Sample Probes

by Protea Limited     based in Middlewich, UNITED KINGDOM

For measurement of gases that do not require hot measurements, Protea can supply sample probes of various material construction. This includes probes made of materials such as PEEK allowing for measurement of possible corrosive gases.

HI-Q - Dry Gas Totaling Meters

by HI-Q Environmental Products Company     based in San Diego, CALIFORNIA (USA)

HI-Q offers a wide range of dry gas totaling meters which, when incorporated in an air sampling system, are an excellent source for recording the total volume of air sampled. The gas-totaling meter may either be connected to have gas supplied through the inlet (connected to the exhaust of a positive displacement pump) or drawn through the outlet ...

Sampling System

by EcoChem Analytics     based in League City, TEXAS (USA)

In order for a Continuous Emission Monitoring System (CEMS) to function as desired it must be configured to deal with the environment and source type it will operate in. The rude fact is that the application engineering aspect of CEMS may be the most important part and it is in sampling systems where that is most critical. But it is not easy, ...

Scentroid - Model DS5 - Stack Diluting Sampler

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Stack sampler is an easy to use device that provides accurate pre-dilution of high temperature gas emissions with nitrogen or zero-air to minimize condensation inside the sample bag. Dilution is achieved inside the heated probe and can be controlled from 1:3 to 1:305 in 13 steps.

Isokinetic Sample Probes

by Ultra Electronics Nuclear Control Systems     based in Wimborne, UNITED KINGDOM

Ultra offers a range of isokinetic sample probes, designed to extract a representative sample of particulate from a effluent duct or stack.   In addition to designing and manufacturing a full range of Isokinetic and Gaseous Sample Probes, we are able to offer advice at the design stage, as to the optimum location. One factor which ...

Simple Mini-Stack-Probe

by Paul Gothe GmbH     based in Bochum, GERMANY

Probe for the use in small scale furnace stacks. System consist of one bent with bent radius 25 mm. Length of the bent as agreed. Entry thread M 12 x 1 mm for mini nozzles (Material: Stainless Steel). Complete with self regulating electrical heater for filter devices, high performance heater cartridge ca. 220 W, 230V, (default settings: 70°C, ...

J.U.M. - Model VE 112WP - Panel Mount Heated Sample Filter and Interface

by J.U.M. Engineering GmbH     based in Karlsfeld, GERMANY

Gas emissions analyzers in CEM’s or as stand alone are often exposed to heavy soot and dust contamination. Therefore it is necessary to filter the sample gas stream.

LEAP - Model HTC-xt PAL - Prep and Load LC System

by LEAP Technologies, Inc.     based in Carrboro, NORTH CAROLINA (USA)

HTC PAL Prep and Load LC System for High Throughput LC Systems, without tray holders or stacks*

PACE - Model 1403 - Heated Line Temperature Controller

by PACE Environmental Products, Inc.     based in Whitehall, PENNSYLVANIA (USA)

PACE offers various models of the 1400 series heated line temperature controllers. All models are 19' rack mountable. The 1400 series can be modified to the users specifications. The Model 1400 is a single heated line temperature controller. The Model 1402 (pictured) has an additional controller for the heated stack filter box. A model 1403 is ...

Zambelli - Model isoplus - Automatic Sampling System

by Zambelli S.r.l.     based in di Milano, ITALY

The isoplus is suitable for both isokinetic (automatic) and manual constant flow rate sampling of between 1 and 35 l/min.  The instrument can be used for dust sampling via sampling line and probe or for gas sampling using a connected impinger train.  The isoplus digital sampler is capable of  measuring the i

Scentroid - Model DR300 - SAMPLING DRONE

by Scentroid, a Division of IDES Canada.     based in Markham, ONTARIO (CANADA)

Scentroid DR300 Sampling drone adds a new dimension to air sampling. The DR300 Sampling drone can be used to sample ambient air at heights of up to 125 meters above ground level or directly sample from stack plumes. Height sampling and direct plume sampling opens a new avenue that can be used to increase accuracy of emission and impact ...

Apex Instruments - Model M5A-C - Casio Graphic Scientific Calculator

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The Casio Graphic Scientific Calculator comes pre-programmed with valuable Isokinetic stack sampling calculations making field calculations quick and easy. Programmed in English and metric units.

Zambelli - Model isodust - High Performance Emissions Sampler

by Zambelli S.r.l.     based in di Milano, ITALY

The isodust is a high performance emissions sampler utilising a rotary pump to give an operating range of 0.4 to 40 l/min.  The instrument incorporates a volumetric dry gas meter, barometric pressure sensor (0-15 psi) and temperature indicator (-55°C to 125°C).  It will automatically compensate for loading losses in the flow rate ...

Copley Scientific - Model NanoMOUDI - Micro-Orifice Uniform Deposit Impactor

by Copley Scientific     based in Colwick, UNITED KINGDOM

The unique aerodynamic design of the MOUDI (Micro-Orifice Uniform Deposit Impactor) family of impactors makes it possible to collect size-fractionated airborne particulate matter over the widest possible range of particle sizes - 10 nm to 18 microns.

Stainless Steel Pan, Bowls and Spoon

by Forestry Suppliers, Inc.     based in Jackson, MISSISSIPPI (USA)

Smooth stainless steel walls and rounded interior corners in bottom prevent soil from collecting in corners and permit easier decontamination. Pans nest inside each other or with covers on, stack securely. Pans and covers sold separately. Made of durable, heavy gauge stainless steel for excellent shape retention and long life.

AutoKinetic - Model XC-5000 - Source Sampler Console and System

by Apex Instruments, Inc.     based in Fuquay-Varina, NORTH CAROLINA (USA)

The XC-5000 Isokinetic Source Sampler is designed for conducting US EPA Method 5 and associated isokinetic methods. Take the worry out of isokinetic calculations and the human error out of data entries recorded by hand. The new XC-5000 is compatible with your existing Method 5 stack sampling components. Report preparation is streamlined with ...

Kurz - Model Series 220 - Isokinetic Samplings Systems

by Kurz Instruments, Inc.     based in Monterey, CALIFORNIA (USA)

Kurz offers a complete isokinetic sampling system to ensure true sample composition — from stack flow monitoring and sample capture to sample flow control. The Kurz Emissions and Sampling System provides accurate sample collection for environmental, process, and nuclear applications. It eliminates under- or over-reporting gas or particulate ...

Need help finding the right suppliers?

Let the XPRTs do the work for you