Environmental Sampling Equipment For Monitoring And Testing Near Malaysia
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 101D Water Level DrawDown Meter has all of the same qualities as our well-known 101 P7 Water Level Meter, with the added feature of a drawdown mode. One simple toggle switches between static water level and drawdown measurements. Water level mode allows accurate depth to water measurements in wells, boreholes, standpipes and tanks. The drawdown function is used to monitor falling hydraulic ...
-
Manufactured by Advanced Sensors Ltd. - part of PAC L.P.based in UNITED KINGDOM
The SA-100/1000 is a side stream Oil in Water analyzer suitable for non-hazardous areas; it uses fluorescence to provide continuous accurate measurements of oil concentrations in water. Reliable real-time data enables operators to take accurate discharge measurements and to improve efficiency of separation processes enabling cost reductions. The SA is ideally suited for marine, industrial and ...
-
Manufactured by SUEZ Water Technologies and Solutionsbased in USA
Continuous, online monitoring of boron with Sievers UPW Boron Analyzer. The Sievers Boron Analyzers enable continuous, unattended online monitoring of ultra-low levels of boron in deionized ultrapure water applications. It's able to run 10 samples per hour and has a limit of detection (LOD) of 15 ppt boron. The Sievers Boron Analyzer is designed to meet the needs of facility managers, DI ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
Solinst supplies in-line disposable filters specifically designed for the preparation of groundwater samples for dissolved metals analysis and for filtering large volumes of turbid groundwater. These filters are any easy effective way to meet the filtration requirements of the US EPA, as they incorporate a 0.45μm membrane into a disposable ...
-
Manufactured by LaMottebased in USA
The 1500 Series of single test, direct reading colorimeters incorporates design advances that enhance reliability, improve accuracy, and simplify the calibration process, all in a portable, hand-held ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Our updated Air-Cooled Probe design features a more robust alloy construction. Upgraded to 253MA with a new variable-speed high-capacity blower inside the riser, the new design will extend the life of the probe and increase the airflow by an additional ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Slide Rule Stack Calculator can be used to find both proper nozzle size and sampling rate. When the calculation of K factor is complete, the slide can be locked into place and the AP and AH scales are properly aligned for isokinetic ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
A riser is required for attaching the impinger case to the SB-2M for rigid arrangements. Apex offers risers with different features and configurations (Part Numbers SBR-XR). Sample case risers attach to the base of the filter oven for test methods requiring extra height between the filter outlet and the first impinger. ...
-
Manufactured by In-Situ Processbased in USA
The ChemScan mini Outdoor Enclosure provides a stable environment for any ChemScan mini analyzer and provides the ability to locate the analyzer at or near the sample source, either tank side at a plant or in a water distribution system. This can minimize degradation of unstable samples and improve cycle time for ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The 408M Micro Double Valve Pump has a remarkably small and flexible design. It is a pneumatic pump which operates under the same principle as the standard DVP, but uses coaxial PFAS-free PTFE tubing with stainless steel valves and filter. Small enough to fit in 1/2" (13 mm) tubing and all channels of the Solinst CMT System, the Micro DVP is ideal for low flow sampling in narrow applications. A ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Apex Instruments offers a complete line of glassware for isokinetic sampling. Our Basic Glassware Set features extra heavy borosilicate glass with unground #28 Ball and Socket Joints with O-Ring Seals. Cost-effective unground joints are more durable than ground joints and the O-rings provide a tight, leak-free seal without grease. This set includes all the glassware necessary for one train. ...
-
Manufactured by ION Science Ltd.based in UNITED KINGDOM
This robust fixed continuous VOC gas monitor has a selectable detection range of 0 – 10 ppm, 0 – 100 ppm or 0 – 1000 ppm and is ideal for use in manufacturing and process industries where VOCs are typically present. With a 4-20 mA analogue output, the fixed continuous VOC gas detector can be simply integrated into a Distributed Control System (DCS) to provide warnings and enable ...
-
Manufactured by Signal Group Ltdbased in UNITED KINGDOM
1/4' & 3/8' tube diameter, 1m to 20m in length. Signal Trace Heated Line is designed to convey hot exhaust gasses from sample points and probes to analyser, without compromising sample integrity. With safety a major consideration the tough, flexible line is electrically isolated from the main supply and is thermally insulated to allow handling even at full ...
-
Manufactured by Solinst Canada Ltd.based in CANADA
The Model 464 Electronic Control Unit is available in 125 psi or 250 psi versions, and uses 4 AA alkaline batteries that last up to 100 hours of normal use. These Controllers can also be operated manually, using only a compressed gas ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Secrets revealed with high resolution. High spectral resolution: the extra that makes the difference in ICP-OES and unvocvers spectral details like no other instrument. Removing common spectral interferences minimizes compromises in line selection and allows the use of highly sensitive emission lines for every application. In combination with its matrix tolerance and superior sensitivity, this ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
PM10 is used for Method 201A testing and is designed for in-stack measurement of particulate matter equal to or less than 10 microns. The shank has a 5/8-inch outer diameter for easy adaptation to an in-stack 47-mm filter assembly or probe. The PM10 cyclone kit includes cyclone assembly, PM10 nozzle set, 47-mm filter assembly, and a carrying case. Kits are available in stainless steel or alloy ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
AAS for flame, graphite furnace, and hydride techniques. This flexible all-rounder has an automatic atomizer that changes for use with flame, hydride, and graphite furnace techniques and is upgradeable to direct solid sampling; all combined on one ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The model W-NK Wet gas meter is a net-volume type integrating flowmeter that employs a drum as the metering element. As the drum is sealed with water or other fluid, the model W-NK provides the measurement of any gas irrespective of the gas specific gravity and viscosity. Further, since this gas meter permits the measurement of very small flows, exhibits high reproducibility, and offers various ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
Unheated Sample Line jumpers are used between the filter and the first impinger in “flexible” sampling arrangements. Jumpers are available in various lengths and configurations. Stainless steel overbraid 3/8″ ID PFA tubing is ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
High-resolution emission spectroscopy with a revolutionary compact design. With its unparalleled spectral resolution, the PlasmaQuant PQ 9000 Elite is ideal for interference-free trace analysis at a high degree of method robustness. In combination with its matrix tolerance and high level of measurement sensitivity, it is particularly suitable for the analysis of refractory, ferrous and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you