Environmental Sampling services for Monitoring and Testing available in Solomon Islands

  • Premium

    Bench-Top Drying Lab Services

    Our in-house Drying Lab is a bench-top system that captures complete drying characteristics of coatings and substrates from small-size samples. The system enables B&W MEGTEC process engineers to track rates of evaporation for water and organic solvents, along with determining the drying time required to reach target solvent or moisture ...

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA). from Process Development Services Service line

  • Premium

    Catalyst and Carbon Testing Services

    B&W MEGTEC has a dedicated in-house testing lab for examining catalyst and carbon. When coupled with an annual preventive maintenance check, our testing services verify that catalytic oxidizer and carbon adsorption systems are able to deliver environmental compliance. Additional testing services cover: Analyzing media for alkali intrusion, ...

    By Babcock & Wilcox MEGTEC LLC based in De Pere, WISCONSIN (USA). from Aftermarket Services Service line

  • Premium

    HI-Q - Air Sampling Equipment Maintenance & Repair Services

    HI-Q Environmental Products Company offers complete repair & retrofitting services for your existing air sampling equipment, systems or accessories. Feel free to call, email or request a quote on the repair or retrofitting of any of your existing air sampling equipment, systems or accessories. Maintenance Service Contracts Available.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Air Monitoring Services Service line

  • Premium

    HI-Q - Complete Air Sampling System Design Services

    Since 1973 HI-Q Environmental Products Company's engineering staff has designed and developed hundreds of 'Custom, Turn-Key' Air Sampling Systems. Among these custom units are Complete Solar Powered Air Sampling Systems, which require Low Amp Draw, DC driven vacuum pumps. Let HI-Q's experience work for you.

    By HI-Q Environmental Products Company based in San Diego, CALIFORNIA (USA). from Air Monitoring Services Service line

  • Premium

    Technical Services

    Through its own, fully equipped laboratory, Bioconservacion has the means to perform a wide range of analytical tests to ensure our customers receive personalised technical assessment.

    By Bioconservacion SA based in Barcelona, SPAIN.

  • Premium

    Methods Development Services

    Cooper Environmental prides itself in accepting clients’ unique technical challenges and providing them with results through our innovated technical solutions. Today, 50% of our recent method development projects employ X-ray Fluorescence (XRF) for trace metals analysis; however, we are actively developing non-XRF methods, such as ...

    By Cooper Environmental Services based in Beaverton, OREGON (USA).

  • Premium

    Media Sampling & Analysis Services

    Bacterial Enumeration, Microbial Specification, Nutrient Profile, Salts & Minerals, Particle Size & Distribution, Surface Area.

    By Biorem Technologies Inc. based in Guelph, ONTARIO (CANADA).

  • Premium

    Consulting Services

    The Tekran Seattle Office takes on a select number of consulting projects under the direction of our Chief Scientist, Dr. Eric Prestbo. Please contact us if you need consulting in the following areas of interest: Mercury measurement and speciation method development. Mercury control technology: Analytical measurement support and strategy. ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Premium

    Parts Services

    Continual development of instrumental parts is a major contributor to Tekran’s success. From a minor component to a major software overhaul, we are constantly searching for faster, safer, more robust, and accurate instrumentation. Many past improvements have been a direct result of customer feedback. If you have suggestions regarding our ...

    By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).

  • Bulk Sampling

    Equipment: BAUER BG 28 H Kelly Rotary Drilling. Scope of work: Exploration of phosphate deposits Diameter of 780 mm Depth 72 m. Location: Northern Territory Australia. Geology: Very strong granite with UCS up to 100 MPa and apatite rare earths.

    By BAUER Resources GmbH based in Schrobenhausen, GERMANY. from Exploration & Mining Services Service line

  • Chop & Sample

    At Gannon & Scott, we understand that not all materials warrant a 100% process. Our cost-efficient and transparent chop and sample service works your materials into uniformly sized increments, passed through our state of the art splitter, allowing us to provide a low cost process that ensures an accurate lot sample for processing.

    By Gannon & Scott based in Cranston, RHODE ISLAND (USA).

  • Sampling Service

    We offer a global sampling service, giving you the opportunity to properly evaluate products before you buy. Product samples are dispatched worldwide within 24 hours, from our purpose-built facilities, with comprehensive support documentation (including Certificates of Analysis where appropriate).

    By Azelis based in Antwerp, BELGIUM.

  • Alarm Setting Services

    Alarm Setting Services are for plant operators using Dust Gross Filter Failure Detectors. To ensure these instruments deliver maximum benefit, it is important that the alarms are configured to the optimum level for the process-specific conditions. PCME offer two categories of Alarm Setting Service for Dust Gross Filter Failure Detectors: Alarm ...

    By PCME Ltd based in St Ives, UNITED KINGDOM. from PCME Support Packages Service line

  • Annual Calibration Services

    PCME has extensive experience assisting operators to meet their compliance monitoring requirements, where understanding that calibration is not simply an isokinetic test is the key to success. Two categories of service are offered for the calibration of Particulate Measurement Systems: Annual Calibration Assist (which does not include isokinetic ...

    By PCME Ltd based in St Ives, UNITED KINGDOM. from PCME Support Packages Service line

  • Customer Sample Preparation

    We offer to prepare your production sample on our sample preparation machines for demonstration purposes, supplying you with your own material and the preparation procedure for your inspection. This is possible for your OES-samples, e.g. grinding of your iron base samples or milling of your non-ferrous samples. We furthermore can prepare your ...

    By LGC Standards GmbH based in Wesel, GERMANY.

  • Recycling Services

    Once delivered to our plant at Cirié (Turin), cats are weighted and transferred into ad hoc boxes in order to be de-canned. This operation is done manually by qualified personnel by means of crocodile shears mounted on specifically designed equipment. The ceramic monolith obtained from de-canning is stocked in big bags identified with ...

    By Invemet S.r.l based in Torino, ITALY.

  • Well Drilling Services

    Marshalls offer a complete well drilling service, in association with recognised well drillers, whereby the client need only deal with one point of contact for the complete project of drilling, sampling & evaluating, specifying the supply and full installation of the required water treatment equipment.

    By CleanStream c/o Marshall Pump Systems Ltd. based in Oldham, UNITED KINGDOM.

  • Sampling and Analysis Services

    We work in close collaboration with local and foreign experts  to offer monitoring/ sampling and analysis to various sectors  followed by consultancy for result interpretation and action required. Most of the Laboratories we work with are ISO 17025 Accredited

    By ISTS Ltd based in Marsaxlokk, MALTA.

  • Sample Testing Services

    If you suspect asbestos at your workplace or living environment, don't hestitate to contact us. We're happy to sample and test your asbestos 'suspicious' materials. We stand ready to visit your site to take a sample and test it for asbestos. Sometimes you might already have an asbestos sample that you need to have tested in our ...

    By Fibrecount NV - part of Shield Group based in Rotterdam, NETHERLANDS.

  • Testing and Sampling Services

    Vibration studies during construction and land development works. This list is not exhaustive, if there is something specific you wish to test for, just ring.

    By Scientech based in Balcatta, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you