Environmental Soil Sampling Equipment For Monitoring And Testing Available In Seychelles
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The stainless steel peat sampler is in fact a kind of gouge auger. The peat sampler is pushed into the soil manually. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is massive. The sample containing section is sealed off by a plate (fin) that can pivot around the axle in the middle of the sampler and that is fitted ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with bayonet connection, undisturbed soil samples can be taken in a liner applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push/pull handle. The set contains, among other things: a hand auger for pre- and clean drilling of the bore hole, the core sampler with the sampler tubes, the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Piston sampler, set for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The split tube sampler is an apparatus for rapid undisturbed sampling at the surface. The apparatus is very suitable for research on root systems, fertilizing and soil biology. The set consists of a split tube sampler with a handle with beating head, hammer with nylon heads (shock-absorbing), sample liners, storage containers and a steel lifting jack with lever and chain. The split tube sampler ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
By applying the bi-partite root auger almost undisturbed, uniform soil samples can be taken in layers of maximal 15 cm. The bi-partite root auger consists of a bottom part fitted with an exchangeable drilling-crown and a short unscrewable top part (handle) with a beating ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
In addition to ordinary percussion gouges it is possible to apply a core sampler with a synthetic sampling tube or foil liners. These are transparent to facilitate immediate visual inspection in the field. The special cutting head has been fitted with an exchangeable core catcher in order to avoid loss of sample or sample contamination. The undisturbed sample can be sealed for transport to a ...
-
PremiumManufactured by AMS, Inc.based in USA
Minimize loss of volatiles with stainless steel cap inserts. Designed to work in conjunction with the plastic liner caps, these stainless steel inserts are ideal for environmental soil sample ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Soil column cylinder auger, type Stiboka. Set for sampling to a depth of 1 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
These stainless steel gouge augers with different dimensions consist of a steel auger pipe, a collecting bucket and a stick with a steel handle. The auger pipe is filled by pressing the collecting bucket with your foot. Because of the conical shape of this pipe the sample is easily pushed toward the collecting trough when the next sample is taken. The correct number of samples per hectare ...
-
PremiumManufactured by AMS, Inc.based in USA
All stainless steel for environmental sampling. Used in soils with low levels of contaminants or where equipment will be cleaned using an acid bath technique. Contains the same components as the basic kit but in all stainless. Includes: Regular, sand and mud augers, cross handle, split soil core sampler, slide hammer, three 4' extensions, plastic liner, plastic end caps, wrenches, and cleaning ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Root research is executed to improve the insight in the possibilities for root growth (depth and concentration) of the root system of trees and plants. In general it is important to all plants to have a dense and extensive root system in the soil. An extensive root system allows the plant to benefit from a large volume of soil. If sufficient quantities of nutrients and water are present the ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The Eijkelkamp percussion drilling set for heterogeneous soils with gasoline powered percussion hammer (Cobra TT), is standard equipped for drilling to a depth up to 5 meter. The complete set contains: a gasoline driven percussion hammer with accessories and wooden transport box, various extension rods, coupling sleeves, percussion gouges (combination type for various types of soil) in various ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Sediment core sampler type Beeker, rod operated, with closable cutting head and piston. Standard set for sampling and discharging core samples, length 1 m, in bucket or jars. Suitable for sampling submerged soils to a depth of 5 m of very watery sediment to non-consolidated sand. ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With these sets, with conical screwthread connection, undisturbed soil samples can be taken in a thin walled tube applying a stainless steel core sampler with sample tubes and cutting head. In soft soils the sampler is pressed into the soil, possibly using the push-/pull handle. In hard soils the sampler tube can be driven into the soil using the hammer with two nylon heads (shock-absorbing) or ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Grass plot sampler large, Ø 23 mm, operational length 10 cm, total length 95 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
The free-fall corer is a sampling tool for fairly undisturbed sampling from the top layer of submerged sediments either or not consolidated. The free-fall corer consists of a frame with strengthening ribs, falling weight and sampler. Using a hoisting unit (davit) on board of a boat the sampler is lowered in free fall. By its own weight and velocity the apparatus penetrates the submerged ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
With the percussion drilling set for heterogeneous soils with heavy electrical percussion hammer (HM 1812), the percussion gouges are hammered into the soil using an electrically driven percussion hammer with 72.8 Joule strike capability. The advantages of this hammer are: no petrol vapours and exhaust gasses directly over the sample. The set contains: an electrically driven percussion hammer ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
PremiumManufactured by Royal Eijkelkampbased in NETHERLANDS
Multisampler, rod operated, standard set, for sampling to a depth of 5 ...
-
Manufactured by PSP Soilsearch Equipment Pvt. Ltd.based in INDIA
Soil Core Sampler for taking undisturbed soil samples in stainless steel soil sample rings 60mm dia, 100cc internal volume, complete with ten stainless steel soil sampling rings with end caps, and one nylon headed shock-absorbing hammer. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you