EPA Methods Equipment For Monitoring And Testing Available In Northwest Territories
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Xact® 920 system is the latest application of SCI’s automated XRF module that allows for the analysis of continuously-drawn aqueous samples for user-selected metals. A measured amount of unknown sample is blended with a known amount of internal standard which is continuously nebulized, evaporated, and collected onto the filter tape. The liquid sample is aerosolized facilitating the ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 200 is a proprietary solid, granular super-absorbent polymer that rapidly absorbs and retains aqueous matter. SLURRYBOND 200 is made from non-biodegradable polymer designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or slump ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
RA-915 Lab is the new direct fully automated laboratory mercury analyzer with 45 position autosampler. It provides accurate, reliable and cost-effective measurements in the broadest range of applications areas. The instrument analyzes solid, semisolid, and liquid samples with no pretreatment, reagents and almost no wastes. RA-915 Lab can be supplied without ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M OVF-3000 Portable Heated Total Hydrocarbon Analyzer is a light weight, over the shoulder portable heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 G is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 G is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND 2000 G will solidify waste slurry on the job site and allow waste to ...
-
PremiumManufactured by AMS, Inc.based in USA
The ESS Core N' OneTM disposable soil core sampler is the easiest way to sample and transport 5 grams of undisturbed soil samples for US EPA Method 5035. CNO is both a soil collection and transport container. CNO capsule incorporates an extruding feature; no need for expensive tools. Threaded septa closure insures air tight seal. CNO handle is strong, economical and easy to use. Each capsule ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The MerPAS® sampler fitted with the white body diffusive barrier is best used for sampling outdoor ambient air of low to intermediate mercury concentrations (0-50 ng/m3). With the high trapping capacity of the MerPAS® substrate, the sampler may be deployed for intervals from 1 week up to 1 year. With air concentrations of 50 to 1000 ng/m3, the sampler can be deployed for time intervals of ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 is a dry product intended to solidify drilling spoils for disposal purposes. SLURRYBOND 2000 is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our transportable model 3-200 fully heated FID is successfully used throughout international markets for over 30 years. Also among other portable gas FIDs, the 3-200 It is the first ever built transportable fully heated FID using our proprietary back purge sample filter. It is widely distributed throughout the industry and the stack testing community and is much liked for its ruggedness, high ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2600-IO5 system provides a manual approach to ambient air analysis or other non-flammable gasses. Samples are collected onto gold-coated quartz traps, and then analyzed on the 2600-IO5 instrument to determine Hg content. The Tekran Model 2600-IO5 Mercury Analyzer is designed for the analysis of ambient air sampling cartridges. The system contains an atomic fluorescence detector, a dual ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND is a powdered inorganic mineral formula used for the solidification of high solids drilling slurries. SLURRYBOND is made from a non-biodegradable mineral designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND will solidify waste slurry on the job site and allow waste to be transferred to the disposal ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Quantitative Aerosol Generator (QAG) creates an aerosol of known concentration by nebulizing a solution. The resulting droplets are carried out of generation area to a drying chamber where they are dried to salt particles. Depending on the application for the salt particles the size can be varied to a number mean between 0.1 and 2 µm in diameter. The aerosol exiting the drying chamber ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model VE572 is a reliable and rugged Dual Channel Sequencing heated total hydrocarbon analyzer for low drift, high accuracy, sensitivity and stability. It uses our time proven hydrogen flame ionization detector (FID) in a heated oven to prevent the loss of high molecular weight hydrocarbons and to provide reliable performance in the analysis of high concentrations down to trace levels of ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
Our model VE7 heated FID is being manufactured since 1974 and is the first heated THC analyzer ever built with a permanent back purge sample filter. It is still the most liked heated FID throughout the stack testing community due to its legendary ruggedness, forgivingness and long standing accuracy and sensitivity. The VE7 belongs to the very first total hydrocarbon analyzers being officially ...
-
PremiumManufactured by Analytik Jena - an EndressHauser Companybased in GERMANY
Mercury determination in the trace and ultratrace range. Efficient - automated and time-controlled flow injection technology. Safe - bubble sensor, optimized drying membrane and cascade enrichment. Effective - low reagent consumption, short measurement ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The EPA Clean Air Act of 1987 established a measuring standard to evaluate and monitor the health effects of thoracic inhaleable particles. The standard was set that in order for an environment to be healthy, in terms of these particles, it must have a concentration of less than 150 mg/m3 of particles with aerodynamic diameters less than 10 microns (mm). The standard has been deemed PM-10, ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you