EPA Methods Equipment For Monitoring And Testing Available In Yukon
-
ShowcaseManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Xact® 920 system is the latest application of SCI’s automated XRF module that allows for the analysis of continuously-drawn aqueous samples for user-selected metals. A measured amount of unknown sample is blended with a known amount of internal standard which is continuously nebulized, evaporated, and collected onto the filter tape. The liquid sample is aerosolized facilitating the ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 7050 is a simplified gas mixer based on the principle of gas stream through mass flow controllers (MFC) and mainly used to calibrate and linearize Gas Monitors. Built according to the ISO 6145/7 normalization, the Sonimix 7050 is totally compatible with the US EPA methods and can be easily linked with National Standards (NIST, METAS, UKAS…). The Sonimix 7050 Multi range gas ...
-
Premiumbased in USA
The FEM-capable Ozone Module helps you confirm ozone attainment. The Clarity Ozone Module is based on best-in-class technology from 2B Technologies, and provides accurate measurements of ozone in air over a wide dynamic range extending from a few parts-per-billion by volume (ppb) to an upper limit of 100 parts-per-million (ppm) based on the well-established technique of absorption of ultraviolet ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
Chlorine 3017M - photometric analyzer with large measuring range and a high resolution for free and total chlorine with the DPD method according to the ISO and US ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal 2 TRANS-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels using the traditional EPA methods 413.2 and 418.1 or ASTM method D7066-04 and Freon-113, hydrocarbon-free grade of perchloroethylene, AK-225, S-316 or other spectroscopic infrared transparent solvent as the extracting solvent. Since the extract is deposited into a 10 mm quartz ...
-
PremiumManufactured by Cerex Monitoring Solutions, LLC.based in USA
The HazLoc UV Sentry model is suited for explosive atmospheres, meeting the standards for North American C1 Div 2 A-D HAZLOC compliance. HazLoc compliance is significantly important in environments where electrical equipment has the potential to be an ignition source for combustible or flammable compounds (such as gases, vapors, dust, fibers, and more). Click here to view all our HazLoc rated ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments PFAS Sampling System is based on the EPA Other Test Method 45 (OTM-45) and Other Test Method 50 (OTM-50) for the isokinetic collection of PFAS from stationary sources. PFAS stands for per- and polyfluoroalkyl chemicals, which are found in a wide range of consumer products and facilities. PFAS can accumulate in the body and may lead to adverse health effects. Gaseous and ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The ...
-
PremiumManufactured by ENVEAbased in FRANCE
Hybrid monitor utilizing ISO 10473 SRM Method & optical technology for Automatic & Real-Time measurement of PM10, PM2.5 and PM1 fine dust. The standard Beta gauge measurement Method ISO 10473 of the MP101M analyzer allows, when used with the patented optical technology of the OPM module, the continuous and simultaneous measurement of fine dust. Combination of both technologies provide a ...
-
PremiumManufactured by Apex Instruments, Inc.based in USA
The Apex Instruments Compact Method 23 sampling system is utilized for US EPA Method 23 Determination of Dioxins and Furans from stationary sources. Dioxins and furans are an unwanted by-product of combustion processes such as municipal and industrial waste, wood and oil ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000 has a range of 0-40m/sec and is the only flow sensor that gives a true non-contracting cross-stack flow measurement of the process. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow ...
-
PremiumManufactured by Cooper Environmental / Sailbri Cooper Inc.based in USA
The Xact 640 system uses reel-to-reel filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor stack hazardous air pollutant (HAP) metal emissions. An isokinetic sub-sample of stack gas goes into the stilling chamber and then drawn through a chemically reactive filter tape. Vapor phase metals, including mercury, are deposited along with particulate-phase metals on the ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The J.U.M 3-900 Portable Heated Methane Only and Total Hydrocarbon Analyzer is a heavy duty FID analyzer to continuously measure methane only or the total hydrocarbons to determine the non methane hydrocarbon concentration within a gaseous sample . This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The InfraCal Model ATR-SP is recommended for measuring oil in water, TPH in soil or FOG in wastewater concentration levels when using hexane, pentane or Vertrel MCA as the extracting solvent. Measurement data obtained with this analyzer will correlate to EPA Method 1664 as both procedures are based on evaporation techniques and measuring the residual oil and grease. The analyzer is equipped with ...
-
PremiumManufactured by CETCObased in USA
SLURRYBOND 2000 G is a powdered inorganic mineral and polymer formula used for the the solidification of high solids drilling slurries. SLURRYBOND 2000 G is made from a non-biodegradable mineral and polymer mixture designed for use on waste slurry that fails to pass a Paint Filter Liquids Test (PFLT) or a slump test. SLURRYBOND 2000 G will solidify waste slurry on the job site and allow waste to ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
The OLM30B is a dual train, fully functional sampling system, complete with Mass Flow Controllers, vacuum gauges, a WatLow controller with thermocouple input and probe power ...
-
PremiumManufactured by Optical Scientific Inc. (OSi)based in USA
The OFS-2000F was designed specifically for Flares stack sand reports flow velocities from 0.03 - 170 m/sec with a ± 2% accuracy. OSi's patented Optical Flow Sensor (OFS) makes drift-free measurements across the entire stack, duct or pipe diameter and calculates an accurate average flow reading. It is the only flow sensor that gives a true non-contacting cross-stack flow measurement of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Single reaction chamber version for the monitoring of NO or NOx, or dual chamber for NO, NOx and NO2 measurements. Exist in 2 different versions: TOPAZE 52M-S : NO or NOx monitoring. TOPAZE 52M-D : NO-NOx and NO2 simultaneous ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you