Exhaust Gas Monitoring Equipment For Monitoring And Testing Available In Alabama
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
Gas analyzers with an FID (flame ionization detector) are well suited for continuous total hydrocarbon measurement. The measurement is not component specific but substance-class specific. In the first approximation, the measurement result is proportional to the number of C atoms in the respective ...
-
PremiumManufactured by ENVEAbased in FRANCE
Rack 3U monitor using the TDL extractive technology to measure online the NH3 pre and/or post catalyst: SCR (Selective Catalytic Reduction) or SNCR (Selective Non-Catalytic Reduction) ENVEA is offering Laser Gas Detection (LGD) modules with exceptional advantages and value for the customer. Tunable Diode Laser Spectrometry (TDLS), enhanced by proprietary technology, is used for the measurement of ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHT heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHT contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted environmental ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel sample valves in a thermostatic controlled oven to prevent the loss of high molecular ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EMS-100 Transmission Smokemeter is a kind of divided-flow transmission product, adopting self-developed measuring technology with independent property rights. It can be widely applied in environmental protection departments, vehicle inspection stations, vehicle factories, vehicle repair plants ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
At present, daily calibration or zeroing process before vehicle measurement of exhaust gas analyzers in some detection station will use ambient air for zeroing, not completely meeting purity requirement of zero gas(especially for NO detection based on infrared principle, which will exists oisture interference). In addition, some other detection ststions use zero gas for zeroing but the amount is ...
-
PremiumManufactured by ENVEAbased in FRANCE
Very small, ultra-light, with on-board GPS, data logger, battery pack and color TFT display for very comfortable and easy mercury monitoring in ambient air and other gases. Portable mercury monitoring and detection is made easy with the Mercury Tracker 3000 XS. Lightweight, rugged construction and compact, the instrument is perfect for indoor and outdoor screening of mercury concentration in ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The VE 112 is an efficient, all heated, low pressure drop sample filter and interface for removing solids from a gaseous sample and supplying sample to up to 5 gas analyzers. It utilizes a permanent all stainless steel 2 micron mesh filter and all stainless steel valve in a thermostatically controlled oven to prevent the loss of high molecular weight hydrocarbons or condensation of water. The ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
VGT-100V Vehicle Emission Tester is a product designed on the basis of Vehicle Mass Analysis System (VMAS) of gasoline. It is used to measure concentration of exhaust gas discharged by vehicle engines, including NO, NO2, CO, CO2, HC, O2, etc. Among which, the measurement of NO and NO2 adopts UV Differential Optical Absorption Spectroscopy (UV-DOAS), the measurement of CO, CO2 and HC employs ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The PEMS-1000 portable On-board Emission Test System is a kind of portable analysis device used for real-time detection of vehicle engine exhaust, measuring related technical requirements for exhaust emission test of light-duty vehicles, heavy-duty vehicles and non-road machinery. The system, adopting integrated design to install on the measured vehicle, consists of gas measurement unit, exhaust ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The CEL-022 is an optical instrument designed to measure the visible opacity (0-100%) of exhaust gas in a duct, stack, or flue; typically the exhaust gas from an industrial combustion process or air filtration system. The CEL-022 is available with or without an Operator Interface (control unit), so for the most cost effective monitoring solution the CEL-022 can operate as a ...
-
PremiumManufactured by Advanced Energy Industries, Inc.based in USA
The Advanced Energy Innova 3433i is a highly accurate and reliable multi-gas monitor with a special configuration for Exhaust Gas or SHED evaporative testing. The measurement system, based on the photoacoustic infrared detection method, is capable of measuring almost any gas that absorbs infrared light. Gas selectivity is achieved through the use of optical filters. Selectively measures a wide ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
Ideal for monitoring levels of artificial Concept smoke and particulate levels in the exhaust gas of industrial combustion or air filtration processes. The CEL-046 is an optical instrument designed to measure the concentration of particulate matter in an exhaust gas passing through a duct, stack or flue; typically the exhaust gas from an industrial combustion process or air filtration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The Model SRS-28BMHTE heavy duty hand truck mounted mobile low volume air sampler designed for outdoor use with an adjustable, aluminum sampling gooseneck. The adjustable gooseneck permits sampling at heights varying from 4’ to 7’ above floor level. Model SRS-28BMHTE contains a standard rotameter for flow measurements. The air sampler is contained in a powder coat painted ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Heated Turnkey Gas Analysis System ideally suited for fast, continuous and simultaneous measurements of NH3 and NOx in DeNOx applications (SCR and SNCR). In DeNOx systems using urea injection with ammonia (NH3) as a reducing agent, the flow rate and control of NH3 must be continuously adjusted and controlled to prevent excess NH3 emissions (slip), to reduce environmental impact and cost of ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The use of the measuring principle of dynamic pressure and PT100 assures a device which is easy in design and operating as well as the real-time monitoring of the measuring parameters. The operating and display unit is integrated in the probe head. On the high-quality display all measuring values, status information and parameters are displayed. Furthermore, a real-time display as line diagram is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you