Exhaust Monitoring Equipment For Monitoring And Testing Near Australia
-
Manufactured by Chelsea Technologies Ltdbased in UNITED KINGDOM
The UviLux TY+ Turbidity Sensor is a lightweight, digital IR sensor providing accurate and repeatable measurements of turbidity. Designed for monitoring exhaust gas cleaning system wash water according to IMO ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter is a portable dilution system that makes sample conditioning as easy as it can be. The Dekati eDiluter comes standard with a fixed 1:60 dilution factor, but it can as well be provided with a customer specific dilution factor in the range of 1:25-1:225. The Dekati eDiluter dilution parameters can be monitored on an integrated LCD display and a rotary controller knob allows the user ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Resolution ELPI+ (Electrical Low Pressure Impactor, HR-ELPI+) is an improved version of the widely used ELPI+ instrument. The High Resolution ELPI+ utilizes a data inversion algorithm that gives real-time particle size distribution in up to 500 size classes 6 nm – 10 μm. Other High Resolution ELPI+ features include wide particle sample concentration range, robust ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Diluter DI-1000 is an easy-to-operate and reliable dilution device for diluting aerosol and gaseous samples from any ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Engine Exhaust Diluter DEED is an engine exhaust conditioning system that fulfills all requirements and recommendations set forth by EURO 6 legislation for a VPR (Volatile Particle ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A compact, reliable multi-gas analyser for measuring flue gas emissions in processes burning natural gas and biomass. The FGA provides accurate, reliable measurement of carbon monoxide, nitric oxide and oxygen in flue gases. It is an integrated solution for Continuous Emissions Monitoring Systems (CEMS) applications in smaller combustion ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eFilter is a unique instrument that combines a standard gravimetric filter holder and sensitive real-time PM detection in one compact instrument. The Dekati eFilter assembly includes a standard gravimetric filter holder that is used to determine gravimetric mass of particles in the ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully integrated with all Dekati® Instruments and is also ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure inside the tailpipe. The total dilution factor in the DEED-300 unit is ...
-
Manufactured by TSI Incorporatedbased in USA
TSI"s Series CA-6000 CA-CALC Single Gas Monitors are ideal exhaust gas analyzers for residential to commercial service technicians and safety inspectors measuring combustion exhaust gases. These exhaust gas analyzers are used to make direct and ambient exhaust gas measurements for tuning and preventative. Plant engineers and maintenance professionals can check critical exhaust gas concentrations ...
-
Manufactured by TSI Incorporatedbased in USA
The AEROTRAK™ Optical Particle Counter is an addition to TSI’s full line of real-time particle measuring instruments including photometers for mass concentration, condensation particle counters for ultrafine particles and diffusion charging with electrometer signal for surface area measurement. Typical applications include cleanroom monitoring, research, exposure assessment, indoor ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI-II and NanoMOUDI-II impactors are second generation Micro-Orifice, Uniform-Deposit Impactors from MSP. These impactors are noted for their superior aerodynamic design, sharp cut-size, and low particle loss characteristics. Up to 6000 precision micro-orifice nozzles are used to reduce pressure drop, jet velocity, particle bounce, and ...
-
Manufactured by TSI Incorporatedbased in USA
MOUDI impactors are classic, precise cascade impactors with sharp cut-size, low internal-loss characteristics, and high accuracy. These cascade impactors provide sharp cut-sizes, low internal losses, and high accuracy in a non-rotating configuration with a 30 L/min smapling flow rate. The MOUDI impactors, 100NR, 100S4, and 110NR, are used for collecting size-fractionated particle samples in the ...
-
Manufactured by Cirrus Research plcbased in UNITED KINGDOM
The CK:261S is a complete noise measurement kit containing a Class 1 Sound Level Meter that has been designed to meet the requirements of ISO 5130-1982 & §29 StVZO for the noise testing of motor vehicles. Designed to be used in workshops, garages and test laboratories alike, the CR:261S is a robust instrument that is simple to operate whilst providing the measurements needed. The CR:261S ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The DLPI+ (Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...
-
Manufactured by Sierra Instruments, Inc.based in USA
Our AirTrak 628S Thermal Mass Flow Meter was originally designed to work specifically with our BG3 Particulate Partial Flow Sampling System as an extremely fast, accurate, and repeatable engine air intake mass flow meter. In addition, the instrument has proven to be an excellent solution in all engine testing ...
-
Manufactured by Sierra Instruments, Inc.based in USA
The InnovaSwitch insertion-type flow switch is a high-performance, industrial-grade mass flow switch for liquids and gases. This product was designed for heavy industrial environments, including high temperature and high pressure. Each InnovaSwitch includes temperature compensation over its entire measurement range to ensure set point stability and accuracy for process temperatures that vary up ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you