Explosion Monitoring Equipment For Monitoring And Testing Available In Colorado
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The ER060L-EEx emitter and receiver set, together with Opsis LD500 laser diode gas analyser, is designed for gas monitoring in explosion classed areas Zone 1 and 2. The monitoring set creates a light path across the internal diameter of a stack or duct for an Opsis emissions monitoring system. Light is generated by the analyser, passed through the emitter and projected to the ...
-
Manufactured by Heidelberg ProMinent Fluid Controls India Private Limitedbased in INDIA
Capacity range of single head pump: 1 – 60 l/h; 25 – 1 bar. The diaphragm metering pump EXtronic® is perfectly suited for the sensitive use of liquid media in facilities with an explosive gas atmosphere as well as for mines at risk of firedamp, as it is approved in compliance with the EU EX Regulation 2014/34/EU ...
-
Manufactured by Frontier LLCbased in USA
Our drying ovens are engineered for the drying and curing of VOC solvent, aqueous, and thermally cured solvent-less coatings. We provide both air impingement flotation dryers and roll support dryers with various curing options including Infrared (IR), Ultra-violet (UV) and Electronic beam ...
-
Manufactured by Precision Digital Corporationbased in USA
The PD663 is a rugged, explosion-proof NEMA 4X loop-powered meter perfect for applications where a simple, inexpensive display is required in a hazardous area. The PD663 derives all its power from the 4-20 mA loop. The PD663 is scaled using four push buttons and can be done without applying an actual calibration signal, and through the explosion-proof enclosure with optional magnetic reed ...
-
Manufactured by Eldridge Products, Inc. (EPI)based in USA
This series meter is great for where agency approvals are required for Explosion Proof area locations. Inline style thermal mass flow meters include a flow section that is usually specified to match the user’s flow conduit and is then plumbed directly into the process line. This design has the sensing elements mounted directly in the flow section for exposure to the process gas. Our inline ...
-
Manufactured by Camcorp, Inc.based in USA
CAMCORP is best known for manufacturing highly specialized Pulse Jet Baghouses including high-pressure, high-vacuum, and explosion-containment designs. CAMCORP also offers a complete range of standard Pulse Jet Baghouses with styles ranging from bottom or top loading bags to walk-in clean air plenums with a variety of inlet ...
-
Manufactured by Chongqing Blue Jay Technology Co.,Ltdbased in CHINA
CP-E explosion-proof meter design for used in petroleum and chemical industry, It's performance meet IEC60079.0:1998, IEC60079-7:1990, IEC60079-18:2004 standard ...
-
Manufactured by NIRA New Instruments and Research for Analysisbased in ITALY
LEL analyzer mod. Sagittarius5000, for the lower explosive level monitoring offers some new features that allows fast analysis, no calibration and low maintenance. The entire LEL system has been verified and found compliant to PL”d” level (EN 13849-1:2008) by TÜV Rheinland, form the sampling probe to the safety alarms contacts (as required by the EN1539:2015). The analyzer is composed by multiple ...
-
Manufactured by Precision Digital Corporationbased in USA
Precision Digital's model PD656 Explosion-proof meter is powering the level transmitter and displaying its output on an easy to ready 0.8' high LED display. The PD656 can be equipped with up to four relays that feature 0-100% deadband and pump alternation ...
-
Manufactured by Industry News Technology (Shenzhen) Co., Ltd. (MAS)based in CHINA
The MAS-ZD-A01 accelerometer (shown in Figure 1-1 below) is a capacitive vibration sensor. The utility model has the advantages of small size, light weight, low frequency characteristics, high resolution, large dynamic range, and convenient use, and is applicable to the fields of bridge vibration monitoring, cable tension monitoring, blasting vibration monitoring and motor vibration monitoring. ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The field transmitters of the COMBIMASS basic series are suitable for flow rate measurement of compressed air and technical gases at medium temperatures up to 130°C and gas pressures up to 40 bar. The electronics of the COMBIMASS basic is located in a dual compartment aluminium enclosure. Typical applications are: compressed air – flow rate measurement and balancing, flow metering of ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Measures percent rock dust in coal mine dust samples, Portable direct-reading instrument, Instantaneous explosibility indication, Easy-to-read digital display, MSHA approved (18-A ...
-
based in UNITED KINGDOM
The V9000 is a battery powered portable vibration monitor, designed for measuring blasting, piling, demolition, construction and traffic vibrations. Vibrock are pleased to announce that from 1 May 2020 the standard 1 year warranty on all V9000 Seismographs can be extended by a further 10 years at no additional cost (to the standard calibration cost) providing the V9000 is calibrated by Vibrock ...
-
Manufactured by Intek, Inc.based in USA
Rheotherm low gas flow meters provide an easy-to-use technology for measuring gas flow in small lines - typically 1” or smaller at flow rates from a few hundred SCFM down to 25 SCCM. (For flow measurement in larger pipes and ducts). These meters give a repeatable reading in mass or standard volume with no external temperature or pressure correction needed. With no mechanical parts, they are ...
-
Manufactured by Blue Siren Inc.based in USA
The Ex-FlowSIREN is a 3G Wireless, Area Velocity, Flow Monitor used for Open Channel Flow in Zone 0 hazardous explosive environments. The monitoring platform is equipped with Dual Wave Doppler Velocity technology and a precision 30ft (10m) 15 PSI pressure depth ...
-
Manufactured by DOD Technologies Incbased in USA
The GT2000TX Explosion-Proof Toxic Gas Monitor provides comprehensive monitoring of toxic and oxygen gas hazards in potentially explosive atmospheres (both indoors and outdoors). Users can modify detector operation using the LCD without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces maintenance time and costs. Easily configures into existing installs with ...
-
Manufactured by Geobit Instrumentsbased in GREECE
GEObit provides a flexible, real time, immediate warning structural monitoring solution. We combine our SRi32S deigitizers/ recorders and a very powerful processing unit for providing real time structural motoring & alert ...
-
Manufactured by ESG Solutions - a Spectris Companybased in CANADA
ESG offers complete microseismic monitoring solutions for a variety of geotechnical applications including underground storage facilities (LPG sites and nuclear waste repositories), vibration thresholds and blasting and monitoring of structures such as dams, high speed rail tracks, bridges and tunnels. Our underground storage systems incorporate microseismic, temperature and pressure data into ...
-
Manufactured by Ecogate Inc.based in USA
Ecogate blast gates open automatically to machines that need exhaust ventilation and close automatically to machines that do not need exhaust ventilation at that particular point of time. This results in reliable dust collection that provides better suction, reliability, performance, and ...
-
Manufactured by Texcel Pty Ltdbased in AUSTRALIA
The Texcel ETM-PI is designed specifically for long-term monitoring applications. It is housed in a lockable weatherproof case, making it ideal for remote and unattended operations. The ETM-PI is backed by Texcel technical support and our proprietary T-Link ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you