Explosive Gas Monitoring Equipment For Monitoring And Testing In USA
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Infrared Gas Detector - 1 or 2 Points of Detection from a Single Head. The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by ...
-
Manufactured by DOD Technologies Incbased in USA
The GT2000TX Explosion-Proof Toxic Gas Monitor provides comprehensive monitoring of toxic and oxygen gas hazards in potentially explosive atmospheres (both indoors and outdoors). Users can modify detector operation using the LCD without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces maintenance time and costs. Easily configures into existing installs with ...
-
based in USA
The Model SCA is a single-channel stand-alone fixed gas detector and/or control panel for continuous gas monitoring in industrial and laboratory applications. This versatile unit can be used in multiple ways – fitted with an integral sensor for safe area use, connected to a remote fixed gas detector for safe area use, fitted with a safety barrier and connected to a remote mounted ...
-
Manufactured by Drägerwerk AG & Co. KGaAbased in GERMANY
Featuring an ergonomic design and innovative infrared sensor technology, the Dräger X-am® 5600 is the smallest gas detection instrument for the measurement of up to 6 gases. Ideal for personal monitoring applications, this robust and water-tight detector provides accurate, reliable measurements of explosive, combustible and toxic gases and vapors as well as ...
-
based in USA
The Model MGT14 is a stand-alone fixed gas detector for continuous industrial gas monitoring applications in non-hazardous areas where there is no risk of potentially explosive gases being present. The detectors can be powered from either a mains power supply of between 85 and 265VAC or a DC power supply of between 9 and ...
-
Manufactured by ATO Automationbased in USA
Low price handheld pumping-type gas detector provides the Ammonia (NH3) gas leak monitoring with high accuracy sensor, audible and visual alarm, optional measuring range 0 to 50ppm, 0 to 100ppm, 0 to 200ppm, 0 to 500ppm etc., LCD display, easy readout, small & portable design, convenient to ...
-
Manufactured by Sensor Electronics Corporationbased in USA
The SEC 3000 gas detector is a unique design combining intrinsically safe and explosion proof approved standards. This toxic gas detector allows for quick and simple field installation of a calibrated sensor module into the gas detector in hazardous locations with power applied. Compact low cost design. Hundreds of reliable, accurate gas sensors are available. “Gas Free” ...
-
Manufactured by Critical Environment Technologies Canada Inc. (CETCI)based in CANADA
The CXT2 Explosion Proof transmitter is a single channel transmitter that reliably and accurately monitors toxic, oxygen, combustible, VOC or CO2 gas concentrations in potentially explosive and harsh environments, including classified hazardous rated areas. It can be connected to a controller (FCS), a control panel or a BAS / BMS / DDC system. The colour, backlit LCD display changes with alarm ...
-
Manufactured by Binder Group GmbHbased in GERMANY
The field transmitters of the COMBIMASS basic series are suitable for flow rate measurement of compressed air and technical gases at medium temperatures up to 130°C and gas pressures up to 40 bar. The electronics of the COMBIMASS basic is located in a dual compartment aluminium enclosure. Typical applications are: compressed air – flow rate measurement and balancing, flow metering of ...
-
Manufactured by DOD Technologies Incbased in USA
The GT2000EX Explosion-Proof Combustible Gas Monitor provides comprehensive monitoring of flammable gas hazards in potentially explosive atmospheres (both indoors and outdoors). Users can modify detector operation using the LCD without ever needing to open the unit. This enables one-man, non-intrusive operation and reduces maintenance time and costs. This unit can be easily configured into ...
-
Manufactured by AIRSENSE Analytics GmbHbased in GERMANY
The GDA-X is the newest addition to our successful GDA series. The GDA-X has the same scope of work as the GDA-FR, which is able to detect chemical substances and dangerous gaseous compounds, with an improved mode of operation for detecting slow-evaporating substances including many ...
-
Manufactured by Crowcon Detection Instruments Ltdbased in UNITED KINGDOM
Designed for use in Zone 1 or Zone 2 hazardous areas, the air aspirated system uses a compressed air driven vacuum generator to draw a gas sample from a single point. Explosion- proof gas detectors are fitted to monitor for flammable gases, toxic gases or oxygen. Each detector provides a 4-20mA output. An intrinsically safe flow-fail device warns if the sample flow is lost due to supply air ...
-
Manufactured by DOD Technologies Incbased in USA
The Falco Explosion-Proof VOC Gas Detector is a fixed monitor that eliminates false readings found with other continuous VOC detectors in hazardous locations. The Falco has four detection ...
-
Manufactured by Aerionics, Inc.based in USA
The new EX Series of Explosion Proof Gas Detectors are used for applications that require a more rugged enclosure and meet Class 1 Division 1 ...
-
Manufactured by Calibration Technologies, Inc.based in USA
Gas Detector for Ammonia and other toxic gases; explosion proof enclosure designed for classified areas. Explosion-proof enclosure for classified areas. Target Gas selective sensor technology. Circuit board sealed in potting material to protect sensitive sensor components and copper tracing from corrosion. Designed for installation in compressor rooms and other classified areas. Transmitters are ...
-
Manufactured by Structured Materials Industries, Inc.based in USA
SMI works with a broad range of toxics. Gas monitors to detect, measure, and monitor toxics, flammable, and explosive gases. Examples of censors are shown in the images. SMI routinely integrates one to several sensors in its systems-interlocking signals with the control and safely interlock ...
-
Manufactured by Safety Systems Technology, Inc. (SST)based in USA
The SST Model GC804 Combustible Gas Detector is a highly versatile and reliable industrial gas detector designed for the toughest job and able to be used in the harshest environments. This detector uses a catalytic poison resistant sensing element which provides accurate measurements in atmospheres where traces of silicone or other poisoning agents may be present and provides excellent long-term ...
-
Manufactured by Rel-Tek Corporationbased in USA
Rel-Tek has pioneered in gas detection for the alt-fuel transit industry since the inception of CNG buses over a decade ago. Rel-Tek drew on its quarter-century of pioneering product development, experience and know-how from monitoring underground mines to tackle the dynamic alt-fuel transit industry. We continue to maintain that leadership role with the introduction of the SafeBoss sensor/alarm ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you