Extractive Gas Analysis Equipment For Monitoring And Testing Available In Kosovo
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
LGT-450 Laser Gas Analyzer is a kind of 4U in-place tunable laser gas analyzer targeting at industrial online monitoring and ambient environment online monitoring. It adopts TDLAS Technology, which can scan specific absorption peak of the measured gas (without background gas absorption) and the gas concentration can be calculated by using second harmonics and the broadening information of the ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The SIPROCESS UV600 is an extractive UV gas analyzer that can measure up to three components simultaneously. SIPROCESS UV600 with state of-the-art electronics and software, has the interfaces required for remote monitoring from a network as well as connecting to a process control ...
-
PremiumManufactured by ENVEAbased in FRANCE
Offers excellent performance for multigas measurements in dry sampling, including HCl, HF, NO, NO2, N2O, SO2, CO, CH4, TOC, CO2 and ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM 500 is an extractive on-line gas analyser dedicated to continuous emission monitoring (CEM). This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years). It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the gases having a periodic structure like NH3, SO2, NO and ...
-
based in CANADA
Spectra-1 Extractive gas monitor features the same gas analysis software as used by the open path Spectra-1 monitor. Tuneable Diode Laser Absorption Spectroscopy (TDLAS) based gas sensing. Closed path internal multi-pass sampling cells are used instead of an open path configuration to calculate gas concentrations. 19' rack mounted design. Options include internal sampling pump and 4-20mA output. ...
-
Manufactured by Unisearch Associates Inc.based in CANADA
LasIR Laser-based In-situ Gas Monitor For US-EPA (PS-18) & TÜV Compliance (EU-EN 14181), Process Monitoring. Unisearch LasIR Gas Analyzer is a continuous monitor designed to measure flue gases for both compliance and process monitoring. The Controller uses a near infrared (NIR) Tunable Diode Laser Absorption Spectrometer System utilizing a single mode laser mounted in a thermoelectric ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
Protea’s gas analysers are extractive gas analysers and as such we need to ensure repeatable, consistent sample flow is provided to the equipment. The choice of pump is of great importance to ensure high uptime of analytical equipment. Protea can supply low-cost, low flow sample pumps for mobile applications. For sampling of corrosive gases, correct choice of pump diaphragms and seals is ...
-
Manufactured by Protea Limitedbased in UNITED KINGDOM
Protea P300 is an infra-red (IR), extractive multi component analyser to provide analysis of up to six gas-phase or liquid process ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) and also to chemical processes requiring low values of H2S. This new model is based on a multi-path flow cell of 1200 mm coupled to a high ...
-
Manufactured by Dynapumpsbased in AUSTRALIA
The Side Channel Blower principle allows oil-less and contactless compression of pumped gases, enabling a low maintenance, contaminant free pumping environment. Side Channel blowers are low in noise level alternative to PD blowers. There are many applications which require positive pressure air and ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The GEM5000 is an easy to use portable gas analyser designed to aid balancing the gas field, maximise power output and ultimately maximise revenue from CH4 ...
-
Manufactured by RMA Fiventures Asia-Pacific Pte Ltd.based in SINGAPORE
Design and Features:Available for Wet, Hot or Dry Fuel Gas. System Compliance to Local / International Environmental Regulations including US EPA 40 CFR Part 75 and 40 CFR Part 60. ...
-
Manufactured by JES Elektrotechnik GmbHbased in AUSTRIA
Visibility and gas monitoring are used to control the tunnel ventilation at normal operation. If and with how much power artificial ventilation by jet fans is operated depends on the measured visibility. The extractive monitoring system extracts air from the tunnel through an intake system and feeds it into the visibility sensor and gas ...
-
Manufactured by Codel - a Forbes Marshall companybased in UNITED KINGDOM
The GCEM40E hot extractive multi-channel gas analyser is CODEL’s industry-proven continuous emissions monitor for difficult applications. Designed exclusively for use on a wide range of applications where the flue gas temperature is abnormally high, low or saturated. Three decades of development, knowledge and practical experience have been utilised to produce this advanced technology gas ...
-
Manufactured by Marton Geotechnical Services Ltdbased in UNITED KINGDOM
A wide range of chambers and covers in HDPE and steel as standard are designed to meet the specific needs of landfill gas extraction systems. They are available in circular, square and rectangular design or made to order to suit customer site requirements. ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The EXM500-L is an extractive online gas analyser for Continuous emission monitoring (CEMS). It is specifically dedicated to the new low level emission Regulations known as 50/30/5/3 (50 mg/Nm3 NOx, 30 mg/Nm3 SO2, 5 mg/Nm3 particles, 5 μg/Nm3 mercury) anda lso to chemical processes requiring low values of H2S. This new model is based on a multi-path flow cell of 1200 mm coupled to a high ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM400 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high selectivity is achieved by a fast Fourier transform (FFT) on the absorbance spectrum for all the gases having a periodic structure like NH3, SO2, NO and ...
-
Manufactured by Tethys Instruments - HORIBA Advanced Technobased in FRANCE
The CEM500 is an extractive online gas analyser dedicated to Continuous Emission Monitoring. This new model is based on a 2048 pixels CCD (charge-coupled device) giving a higher resolution (0.1 nm) and a longer lamp life time (3 years) It is based on UV spectroscopy that brings a higher sensitivity than infra-red and gives the possibility to measure several gases simultaneously. A high ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you