Only show results available in Connecticut? Ok

Fence Line Monitoring Applications

  • Premium

    Low level measurement of aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring.

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    BTEX in Ambient Air Application using a High-Sensitivity PID

    The Series 8900 BTEX Analyzer with a high-sensitivity PID provides direct low level measurement of Benzene, Toluene, Ethylbenzene, and Xylene`s in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measuring aromatic hydrocarbons (BTEX) for pollution control and environmental monitoring

    The Series 8900 BTEX Analyzer provides direct measurement of Benzene, Toluene, Ethylbenzene, and Xylenes in ambient air. This instrument is utilized in ambient air networks around metropolitan areas and fence-line monitoring at industrial sites. The Series 8900 BTEX Analyzer employs a photoionization detector (PID) as the sensing element. This detector is specific to volatile organic compounds. The Benzene, Toluene, Ethylbenzene, and Xylene`s in the gas sample are physically separated using proprietary GC columns.

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Measurement of methane and non-methane hydrocarbons for environmental air quality.

    The Model 8900 Methane/Non-Methane Analyzer provides direct measurement of Methane and Non-Methane Hydrocarbons. This instrument is utilized in ambient air monitoring networks around metropolitan areas, fence-line monitoring at industrial plants and hazardous waste sites, and in the production of high purity industrial gases. Methane is a naturally occurring gas generated from the decomposition of biological materials and industrial activity. Since Methane is not considered a pollutant it is the Non-Methane...

    By AMETEK MOCON - Baseline based in Lyons, COLORADO (USA).

  • Premium

    Ambient air quality monitoring solutions for benzene fence-line monitoring

    To monitor benzene emissions can be a challenge, but OPSIS makes it easy. Benzene is an aromatic hydrocarbon liquid that evaporates quickly if exposed to ambient air. It is one of the most commonly used substances in the chemical industry and it is known to cause cancer. For this reason, refineries in the United States must start monitoring fugitive emissions of benzene from January 30, 2018. This is part of the 2015 U.S. EPA Petroleum Refinery rule. In case a yearly rolling average of benzene concentrations...

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Open path ambient air quality monitoring

    Proven Solutions for Fence-line and Perimeter Ambient Air Monitoring Offering 40 CFR 63.658, BAAQMD Rule 12-15 and SCAQMD Rule 1180 Compliance.

    By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).

  • Premium

    Emissions Monitoring

    The Opsis monitoring solution in aluminium smelters is based on either DOAS or laser diode technique. The on-line, open-path systems are used for monitoring HF and sulphur dioxide in potrooms, in fence-line applications and in continuous emissions monitoring. Opsis has long experience of monitoring in aluminium smelters.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient Continuous Metals Monitoring/ Fence Line Monitoring/ Source Identification

    The Xact® 625i combined with ADAPT software creates the industry`s most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification...

    By Cooper Environmental Services based in Tigard, OREGON (USA).

  • Premium

    Fence-Line Monitoring of Fugitive Emissions

    The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Emissions Monitoring for Steel Mills

    Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making process.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Emissions Monitoring for Mining / Emissions Monitoring for Smelting

    The Opsis monitoring solution for mining and smelting applications is based on either DOAS or laser diode technique. Opsis non-contact monitoring solutions are very well suited for applications in the Mining and Smelting Industries, as the flue gas conditions often involves high temperatures and high dust concentrations. The on-line, open-path systems are used for monitoring HF, sulphur dioxide, SO3 and HCl in potrooms, in fence-line applications and in continuous emissions monitoring.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Ambient air quality monitoring solutions for fence-line monitoring

    The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan software.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    Continuous emissions monitoring solutions for steel plants

    The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very limited.

    By Opsis AB based in Furulund, SWEDEN.

  • Premium

    PID sensors for OEMs industry

    Ion Science leading PID sensors are recognised around the world by original equipment manufacturers for their longevity, stability and critically their resistance to humidity, so are ideal for deployment across a wide range of testing environments and diverse applications.

    By Ion Science Ltd. based in Royston, UNITED KINGDOM.

  • Robust and Simple Solution for Monitoring Fugitive Emissions

    Upstream and downstream activities in the industry require a variety of gas analysis capabilities that are well served by MIRICO’s laser-based technology. Our unique Laser Dispersion Spectroscopy technique is a versatile technology that can be deployed in an open-path configuration for the measurement of methane for health & safety monitoring. When combined with an array of reflectors, a single light source can cover a complex route in excess of 1 km, a considerably larger distance than comparable...

    By Mirico based in Chilton, UNITED KINGDOM.

  • Gas Detection Solutions for Sour Gas

    The sour (H2S) content of hydrocarbon fields worldwide is increasing, and many natural gas fields have very high H2S – sometimes in excess of 50%. H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. Therefore smell is an unreliable means of determining dangerous levels. Existing H2S point sensors are maintenance intensive, slow to respond and...

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Air quality monitoring system for industrial purpose

    Source apportionment of pollution – establishing where pollution of a particular profile is coming from Establishing where and when an industrial plume has touched the ground Fence line monitoring around an industrial site

    By AQMesh based in Stratford-upon-Avon, UNITED KINGDOM.

  • Gas Detection Solutions for Gold Refining

    Hydrogen Cyanide (HCN) is a highly toxic compound that is a byproduct of many industrial processes. Existing HCN point sensors are maintenance intensive, slow to respond and provide limited coverage. Many HCN sensors do not work reliably in hot or cold weather, or in humid environments. Our technology can be used for fixed monitoring applications or for temporary protection of workers during construction projects.

    By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).

  • Precision moisture analysis instruments for Hydrogen Sulfide (H2S) monitoring for landfills

    Trusted odor detection at parts-per-billion (ppb) levels. If you operate a landfill, you know that it takes constant vigilance to keep your community happy. Monitoring for hydrogen sulfide odor is no exception. When planning your strategy for hydrogen sulfide odor control, be proactive. Be prepared. Trust Jerome to give you the data you need to make the right decisions.

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • Pollutant monitoring for the manufacturing industries

    Ormantine`s air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA`s many solutions have applications from personal exposure monitoring to long term fence line monitoring studies.

    By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you