Fence Line Monitoring Applications available in Estonia
-
Premium
Emissions Monitoring for Steel Mills
Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient Continuous Metals Monitoring/ Fence Line Monitoring/ Source Identification
The Xact® 625i combined with ADAPT software creates the industry's most powerful tool for high time resolution detection of airborne metals. The Xact® 625i measures trace metals at very low detection limits at time resolutions down to 15 minutes. The ADAPT package captures corresponding wind speed and wind direction data, then seamlessly integrates the measurements into wind regression analyses available at the touch of a button. This creates the most single most powerful fence line/ source identification ...
By Cooper Environmental / Sailbri Cooper Inc. based in Tigard, OREGON (USA).
-
Premium
Fence-Line Monitoring of Fugitive Emissions
The Opsis open path monitoring system is an excellent tool for monitoring air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring solutions for fence-line monitoring
The OPSIS open-path monitoring system is an excellent tool for monitoring the air quality, fugitive emissions and gas leaks at industrial sites. By arranging monitoring paths strategically at locations outside the borderline of an industrial area, fugitive emissions and gas leaks will effectively be detected. By combining the measured gas data with meteorological parameters information such as where the pollution sources are located and the strength of the emissions can be calculated, using the EnviMan ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Ambient air quality monitoring solutions for benzene fence-line monitoring
To monitor benzene emissions can be a challenge, but OPSIS makes it easy. Benzene is an aromatic hydrocarbon liquid that evaporates quickly if exposed to ambient air. It is one of the most commonly used substances in the chemical industry and it is known to cause cancer. For this reason, refineries in the United States must start monitoring fugitive emissions of benzene from January 30, 2018. This is part of the 2015 U.S. EPA Petroleum Refinery rule. In case a yearly rolling average of benzene concentrations ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Solutions for fence-line and perimeter ambient air monitoring
Cerex Multi-Gas Open Path Analyzers are available in both FTIR and UVDOAS technologies to meet specific requirements for perimeter ambient air quality monitoring, leak detection, fugitive emissions monitoring and ambient air quality monitoring. Cerex multi-gas analyzers offer significant advantages over single gas analyzer arrays, electro-chemical sensor arrays and time integrated air sampling ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Fully-automated gas chromatographs solutions for oil & gas industry
For the international oil and gas industry Synspec instruments are used for process, fence line and stack emissions monitoring. Whether it is about aromatics, mercaptans or olefines the industrial end-users retrieve data of concentrations of chemical compounds for optimisation of their process ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Premium
Environmental Impact Assessment Monitoring for Tracking Industrial Emissions
Environmental Impact Assessment is compliance for any polluting manufacturing industry. Changes in weather conditions and wind speed, resulting in the monitoring of dust-particulates and gases. They escape from downwind direction which becomes a problem. Additionally, for large-area manufacturing sites, the required number of air-monitoring points is quite high. The absence of fenceline monitoring makes it difficult to track all possible emissions. Also, high investment and running cost limits the usage of ...
By Oizom Instruments Pvt. Ltd. based in Ahmedabad, INDIA.
-
Premium
Open path ambient air quality monitoring
Proven Solutions for Fence-line and Perimeter Ambient Air Monitoring Offering 40 CFR 63.658, BAAQMD Rule 12-15 and SCAQMD Rule 1180 ...
By Cerex Monitoring Solutions, LLC. based in Atlanta, GEORGIA (US) (USA).
-
Premium
Continuous emissions monitoring solutions for steel plants
The nature of steel manufacturing processes places severe limitations on the monitoring methods that can be used. Aggressive environments combined with high levels of particulates and gases make the choice very ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Fully-automated gas chromatographs solutions for fence line monitoring sector
VOC measurements are conducted continuously at the perimeter of a plant to determine the VOC concentration upwind and downwind; with this information the actual addition of VOC by a plant can be determined. With our analytical equipment on your fence line you can detect 24/7 the anomalies in airborne VOC ...
By Synspec BV based in Groningen, NETHERLANDS.
-
Aerosol and particle technology for environment industries
Fine dust is generated by industrial exhaust gases but in particular due to traffic. Environmental pollution is therefore caused particularly by exhaust gases of diesel-engined vehicles (diesel soot) but on the other hand also by abrasion of street, tyres and brakes and its ...
By Palas GmbH based in Karlsruhe, GERMANY.
-
Gas sensors for original equipment manufacturers (OEMs)
Our leading PID gas sensors are recognised around the world by original equipment manufacturers for their longevity and critically their resistance to ...
By ION Science Ltd. based in Royston, UNITED KINGDOM.
-
Laser Based Remote Sensing Instruments for Remote Temperature and Humidity Profiling
Accurate profiling of atmospheric temperature and humidity is a prerequisite for many meteorological studies, including nowcasting, model evaluation, and assimilation. Unfortunately, existing instrumentation lacks either the temporal or vertical resolution required for such application. To fill this gap, Raymetrics S.A., a global leader in lidar (lidar detection and ranging) technology, is developing a new state-of-the-art temperature and humidity lidar instrument. Based on the lidar technique the new product can ...
By Raymetrics S.A. based in Athens, GREECE.
-
Pollutant monitoring for the manufacturing industries
Ormantine's air monitoring equipment is widely used to monitor both indoor and outdoor air quality. Continuous development allows us to provide equipment for a broad range of applications, covering short-term and long-term monitoring. Pollutants can be detected even at very low levels – limits of detection are typically in the low parts per billion (ppb) range. Ormantine USA's many solutions have applications from personal exposure monitoring to long term fence line monitoring ...
By Ormantine USA Ltd., Inc. based in Palm Bay, FLORIDA (USA).
-
Gas Detection Solutions for Sour Gas
The sour (H2S) content of hydrocarbon fields worldwide is increasing, and many natural gas fields have very high H2S – sometimes in excess of 50%. H2S is extremely dangerous because, although people can smell it at low levels (about 5 ppb) it does not smell much worse at the exposure limit value of 10 ppm or at potentially fatal levels in excess of 100 ppm. Therefore smell is an unreliable means of determining dangerous levels. Existing H2S point sensors are maintenance intensive, slow to respond and provide ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
Laser based remote sensing instruments for planetary boundary layer applications
The Planetary Boundary Layer (PBL) is important for everything from climate to air quality studies. LIDARs with high spatial and temporal resolution can monitor the PBL in a high amount of detail using aerosols as ...
By Raymetrics S.A. based in Athens, GREECE.
-
Short term noise measurement for safety consulting
For environmental noise monitoring when short measurements are required using a hand held Sound Level Meter. This could be for boundary monitoring of industrial sites or noise surveys for planning ...
By Casella based in Kempston, UNITED KINGDOM.
-
Gas Detection Solutions for Gold Refining
Hydrogen Cyanide (HCN) is a highly toxic compound that is a byproduct of many industrial processes. Existing HCN point sensors are maintenance intensive, slow to respond and provide limited coverage. Many HCN sensors do not work reliably in hot or cold weather, or in humid environments. Our technology can be used for fixed monitoring applications or for temporary protection of workers during construction ...
By Boreal Laser Inc. based in Edmonton, ALBERTA (CANADA).
-
Precision moisture analysis instruments for Hydrogen Sulfide (H2S) monitoring for landfills
Trusted odor detection at parts-per-billion (ppb) levels. If you operate a landfill, you know that it takes constant vigilance to keep your community happy. Monitoring for hydrogen sulfide odor is no exception. When planning your strategy for hydrogen sulfide odor control, be proactive. Be prepared. Trust Jerome to give you the data you need to make the right ...
By AMETEK Brookfield based in Middleboro, MASSACHUSETTS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you