Fiber Optic Sensing Applications available in Newfoundland
-
Premium
Video Borescope vs Fiberscope: Understanding the Differences
Optical technology has greatly revolutionized the way industries carry out repair operations especially when it comes to complicated or heavy machinery. Fiberscopes and Video Borescopes allow workers accessing or viewing otherwise hidden niches or joints in their hardware. This in turn saves them the time and money that they would have spent in arduous disassembly ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Measurements Solutions for Form & Flatness
Manufactured surfaces can take on many shapes and sizes. For surfaces where the characterization of shape is function critical, ZYGO laser interferometers and 3D optical profilers stand out with sub-nanometer repeatability of non-contact surface data. Incorporating industry standards for form and flatness into Mx™ analysis software creates a single stop measurement tool for surface inspection. Explore the solutions for your application in surface form and flatness metrology ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Transmitted Wavefront
Transmitted wavefront error (TWE) is used to qualify the performance of optical elements as light passes ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Total Thickness Variation (TTV)
Products we use every day, and those being developed for the future, create demand for precision parallel optics like wafers, display glass, disk drives, etalons and waveguides. The variation in thickness of these kinds of optical components, known as Total Thickness Variation or TTV, can be critical to qualify and control precisely. TTV defines the maximum physical variation in thickness of a parallel window or concentric spherical optic, but can be measured optically. An optical measurement enables a large ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Measurements Solutions for Optical Components
Accurate qualification of optical components is a vital source of feedback to an optical manufacturing operation. From plano to spherical to aspheric shapes, common measurements include surface form error, waviness and roughness. Depending on the type of part and its application, material and geometric properties such as transmitted wavefront, homogeneity, wedge, parallelism, thickness variation, and radius of curvature may also require careful control. Optical components are the building blocks of optical ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Continuous emissions monitoring solutions for mineral wool production
Process control and emissions monitoring in a mineral wool plant is a challenge due to the presence of phenol and formaldehyde. To use an extractive system in this environment will demand a lot of maintenance. The OPSIS DOAS system is different and provides plants with an accurate analyser that will operate with a minimum of maintenance. The OPSIS DOAS system is based on a non-contact method using an optical measurement path that can operate across the ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Chromatography laboratory instrumentation for chemical industry
Effective, safe and sustainable processes play a key role in the chemical industry. To meet these needs, BUCHI offers a variety of reliable and modern solutions for R&D, scale-up, production and quality ...
By BUCHI based in Flawil, SWITZERLAND.
-
Premium
Continuous emissions monitoring solutions for fertilizer industry
Process control and emissions monitoring in a fertilizer plant is a challenge due to the high concentrations of HF. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Measurements Solutions for Machined Surfaces
ZYGO 3D optical profiler products utilize non-contact coherence scanning interferometry (CSI) technology to offer precise, rapid and quantitative surface metrology of form and roughness for improved part quality and manufacturing yields. Our field-proven and innovative solutions enable our customers to control their current machining processes, while providing the insight to analyze and solve manufacturing challenges as they ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Continuous emissions monitoring solutions for palm oil plants
Make more out of your mill. OPSIS tested and approved monitoring systems provide cost-effective and reliable on-line monitoring of several gas compounds, such as both high and low concentrations of methane, moisture, carbon dioxide and hydrogen sulphide, at several ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for sulfuric acid production plants
The process control of a sulfuric acid plant needs good and reliable detection of gas phase sulfur dioxide (SO2). To measure SO2 is a challenge due to the corrosive environment and high concentration of SO2. Several places in the process needs to be monitored and to transport the sample gas is difficult. A large dynamic range is needed as the SO2 concentration can vary between 15% volume and a few mg/m3. Most systems installed need a lot of maintenance, sometimes as often as every ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Near-Infrared Analysis for Edible Oil Sector
Fats and oils are recognized as essential nutrients in human diets and are presented in varying amounts in many foods. They provide the human body with a concentrated source of energy and supply essential fatty acids that are precursors for important hormones. The quality of edible fats and oils is assessed through parameters such as iodine value (IV), trans content, peroxide value (PV), anisidine value (AV), saponification number (SN), free fatty acids (FFA), and solid fat content (SFC). The traditional chemical ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Measurements Solutions for Optical Systems
Optical systems are integral to many of the products consumers utilize every day from the compact camera lens assemblies in mobile devices to the telescopes in satellites that provide timely communications, weather and surveillance updates. Each optical system consists of multiple optical components that are designed to meet a specific level of performance when properly aligned as an assembly. Despite the differences in size and application, the metrology required for each assembly can be quite similar with ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Continuous emissions monitoring for sulphuric acid production plants
The process control of a sulphuric acid plant needs good and reliable detection of gas phase sulphur dioxide (SO2). To measure SO2 is a challenge due to the corrosive environment and high concentration of SO2. Several places in the process needs to be monitored and to transport the sample gas is difficult. A large dynamic range is needed as the SO2 concentration can vary between 15% volume and a few mg/m3. Most systems installed need a lot of maintenance, sometimes as often as every ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Chromatography laboratory instrumentation for pharmaceutical industry
Drug discovery and development for pharmaceutical industries require safe, efficient and compliant sample processing and analytics. BUCHI offers a variety of reliable solutions throughout the whole workflow leading to the production of a new drug, from lead generation to the final registration for introduction on the ...
By BUCHI based in Flawil, SWITZERLAND.
-
Premium
Measurements Solutions for Optical Measurement of Films & Coatings
Precise characterization of thick and thin film topography and thickness, and substrate topography. There are many applications in which the deposition and control of films and coatings is critical to enabling functionality or efficiency of devices, including consumer electronics, semiconductors, optics and many more. Such advanced devices often demand accurate characterization of film topography and layer thicknesses to ensure high quality and ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Monitors, gas analyzers solutions for photonics & optics
Advanced optics manufacturing is now requiring much cleaner processing environments than were necessary in the past. Smaller device structures, use of shorter wavelengths, and higher laser power densities are all factors that make advanced components more susceptible to damage from contamination. Particle Measuring Systems can provide you with the tools to determine how clean your environment ...
By Particle Measuring Systems (PMS) based in Boulder, COLORADO (USA).
-
Premium
Measurements Solutions for Wedge & Prism Angle
The performance of optical systems such as telescopes, camera lenses, and laser systems rely on the quality of the optical components within the systems. Many plano optical components appear completely parallel from a side view, however there is typically some wedge between the sides. In extremely precise systems, knowing the degree of a window’s wedge is ...
By Zygo Corporation - AMETEK, Inc based in Middlefield, CONNECTICUT (USA).
-
Premium
Process monitoring solutions for CO2 capture
The process control of a CO2 capture plant needs good and reliable detection of gas phase NH3 and CO2. Measuring NH3 is a challenge due to the corrosive environment and high concentrations of NH3. Several places in the process needs to be monitored and to transport the sample is difficult. A large dynamic range is needed as the NH3 concentration can vary between 15% volume and a few ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Continuous emissions monitoring for brick plants
Process control and emissions monitoring in a brick plant is a challenge due to the high concentrations of HF. The HF is generated in the process and gas phase HF can reach 50 mg/m3 or more. To use an extractive system in this environment will demand a lot of ...
By OPSIS AB based in Furulund, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you