Fine Particles Monitoring Equipment For Monitoring And Testing Available In Slovenia
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati PM10 Impactor is a three-stage cascade impactor for determining particle gravimetric mass size distribution. The operating principle of the Dekati PM10 impactor is based on inertial size classification and gravimetric or chemical analysis of the collected, size classified particle samples. This impactor has cutpoints of 10, 2.5 and 1 μm making it an ideal choice for PM10, PM2.5 and ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Filters for the filter stage, Ø70 mm. EMFAB filter, TX40 (100 filters), Ø70 mm. Incl. 100 filters for the filter ...
-
PremiumManufactured by Testo, Inc.based in USA
The number of solid fuel burning systems, and the fine particles they emit, has continued to soar over the past years. This, and the amendment of 1. BlmSchV, has presented chimney sweeps, heating engineers, and service technicians with a new and formidable challenge. The testo 380 fine particle analyzer is designed to aid these professionals in performing easy and precise fine particle ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Gravimetric Impactor (DGI) is a high sample flow rate cascade impactor for low concentration particle measurement applications. The DGI measures gravimetric particle mass size distribution of particles < 2.5 μm in five size fractions. Typical measurement applications of the DGI impactor include engine emission measurements, air quality studies and other low concentration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The HT-DLPI+ (High Temperature Dekati Low Pressure Impactor) is a 14-stage cascade impactor that is used to determine airborne particle mass size ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
70 mm filter stage holder with 2.5 μm ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Temperature controller to operate ELA-460/ELA-460B. Same controller for the Dekati Cyclone heater, Heated sampling line DEED-150X and Dekati Diluter ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Polycarbonate collection foils, 100 pcs, Ø25 mm, Collection foils for DLPI+ impactor stages, suitable for chemical ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Can be operated with temperature controller DR- ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
For sampling from max 600 °C. 230 V (also available as 2 m version) 110 V. Can be operated with temperature controller ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Aluminium foils, 300 pcs, Ø25 mm, Collection foils for DLPI+ impactor stages. Greased aluminium foils, 100 pcs, Ø25 mm, Pre-greased with ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
For fast greasing of the collection substrates. Stencil not included. Hazardous material, needs special ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Impactor foil grease 10 g including mixing jar 1:20. Max 100 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Teflon filter (50 filters), 2 μm, Ø47 mm. Incl. 50 filters for gravimetric ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The new Dekati MPEC+ (Mobile Particle Emission Counter) is a compact and portable instrument for easy onboard PN-PEMS measurements. At the core of the MPEC+ is the patented Dekati ePNC particle counting technology, which has been further optimized for fast transient emission measurements. The MPEC+ is the device of choice for highly accurate PN-PEMS testing in accordance with RDE requirements. ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
To remove humidity from the sample. 120 cm, 120 + 60 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
The Dekati Axial Diluter DAD is a simple and cost-effective dilution tool that can be used as a stand-alone unit or as a part of other aerosol sampling and dilution systems. The DAD is especially designed for use with Dekati Fine Particle Measurement Instruments and applications where low consumption of dilution air is a requirement. The Dekati Axial Diluter is made of stainless steel which ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
Set incl. 11 pcs stainless steel sampling probes (3,45- 3,81-4,16-4,57-5,0-5,46-5,92-6,71-7,62-8,69-9,9 mm). Sampling probes can be directly connected into SAC-65 sampling cyclone inlet (R3/8") or IPR-500. Set includes also 11 pcs Cu gaskets 17/21x1.5 ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
4-stage impactor (D50 2.5-1.0-0.5-0.2 μm) and 70 mm back-up filter stage. Package includes carry case, spacer rings (2 pcs), quick connectors for outlet and inlet, spare set of metal springs (12 pcs), user manual and calibration ...
-
PremiumManufactured by Dekati Ltd.based in FINLAND
EMFAB filter, TX40 (100 filters), Ø47 mm. Incl. 100 filters for gravimetric ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you