Fixed Gas Monitoring Equipment For Monitoring And Testing Available In Nebraska
-
ShowcaseManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 detector can satisfy the most demanding safety requirements. The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol. The CTX 300 transmits data in ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLCT 60 is a generation of high quality gas detectors which covers all industrial needs for a variety of applications. The OLCT 60 Series is composed of several versions: XP or IS sensor (toxic or oxygen versions). Remote or on-board sensor. The OLCT 60AD version allows the sensor to be installed remotely up to 15 meters (standard), allowing detection in inaccessible locations, or in Zone 0 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The stainless steel detector provides protection and resistance to corrosive agents. Classified IP 66, they are resistant to dust and water ingress. The precalibrated sensors of the OLCT 20 can be disconnected by turning the head of the unit. These “smart” sensors can be calibrated on a work bench, outside hazardous ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The tSense CO2 + RH/T is an attractive, wall-mounted carbon dioxide concentration, temperature, and relative humidity transmitter. It is available with or without an LCD color touch screen ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CM-650 Welding Gas Analyzer is designed for real-time analysis of 2-gas mixtures or 2 different gas concentrations for welding shield ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CM-900: CO2 Industrial Fixed Gas Detector is a gas safety solution for industries that need to measure up to 5% carbon dioxide levels in order to mitigate potential hazards from occurring. This device also includes an IP64 industrial enclosure specifically for harsh environments or where wash-down is ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot CH2O is a robust CH2O Gas Monitor that can measure formaldehyde levels in the air. This CH2O gas detector uses electrochemical sensing technology to measure CH2O concentration in the air. The industrial formaldehyde monitor is equipped with an electrochemical sensor. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Model DM-100 Series sensors feature intelligent electronics, non-intrusive operator interface and comprehensive fault diagnostics. The sensor is packaged in an electro-polished 316 stainless steel housing fitted with a ¾ inch NPT thread. The plug-in, field replaceable sensor cell features large surface area gold-plated pins that reduce the effects of corrosion in harsh industrial ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GD10P Series has been designed with features that provide an effective response to the detection of gas hazards in a wide range of industrial environments from boiler plant rooms to offshore petrochemical installations. These GD10P infrared gas detectors differ from all other models, because they utilize silicon based solid-state infrared sources. The complete optomechanical design and ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
This accurate, easy-to-adjust CO2 regulator and flow meter support from 0.5 to 15 SCFH (Standard Cubic Feet Per Hour) with an electronic solenoid valve. It comes with a tank pressure gauge, an easy-to-read square-shaped flow meter, and 6-foot power cord. It will work with any 120VAC control ...
-
PremiumManufactured by Oizom Instruments Pvt. Ltd.based in INDIA
The AQBot VOC is a robust VOC Gas Monitor that can measure Volatile Organic Compounds in the air. This VOC gas detector uses photoionization detection (PID) technology to measure total volatile organic compounds in the air. This sensor module is enclosed in the IP65 rugged composite enclosure to protect from harsh ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CO2 Multi-Sensor Safety System is designed to monitor carbon dioxide gas levels and detect leaks of higher concentrations using CO2 gas detection alarm systems. This device can monitor carbon dioxide levels and detect leaks protecting facilities and offices from over ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CM-7004: CO2 Multi Sensor Horn Strobe Add-On is designed to provide instant audible/visual strobe alarm that can be used in interior placements with the CO2 Multi Sensor Tablet, Sensors, and Reset Units. This CO2 Multi Sensor Horn Strobe works only with our CO2 Multi Sensor Tablet. ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The WiFi Indoor Air Quality Monitor lets you simply and easily monitor and control indoor air quality. Use it to visually monitor air quality with its easy-to-read light ring which indicates the measuring range of CO2 ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The Remote CO2 Storage Safety Dual Alarm (RAD-0102) is designed to protect people who work near carbon dioxide stored or produced in confined spaces. At high levels, CO2 can result in severe negative health effects ranging from headaches, fatigue, asphyxiation, and even ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Oldham is pleased to propose its wireless system with the OLCT 80 field detector/transmitter. This model allows wireless connectivity in ATEX 1 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Digital combustible detector for oxygen, toxic gases or combustible. The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen. Intended for use in combination with the MX 16, MX 32 and MX 43 controller, the OLCT 10N provides a fast and accurate response. All transmitter information is received by the controller in less than 1 second. ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
This CM-7002: CO2 Multi Remote Relay Add-On is designed to trigger third-party devices like exhaust systems and fire panels for all CM-7003 sensors. This CO2 Multi Remote Relay Add-On works only with our CO2 Multi Sensor Tablet. Ensure the safety of your employees and guests as well as compliance of your facility with the fully customizable CO2 Multi-Sensor Series. ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The sensor electronics are completely protected and immune to water ingress and corrosion. The sensor elements are all plug-in components and can easily be replaced in the field. Operator interface is non-intrusive via a small handheld magnet. Configuration and routine calibration is intuitive and menu driven with fully scripted instructions. Sensor status is displayed on a built-in alphanumeric ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The 7200 Plus and 7400 Plus Controllers are designed to provide simultaneous display and alarm functions for up to four monitored variables. A graphic LCD displays monitored data as bar graphs and engineering units. Three adjustable alarm levels are provided per channel. Relay outputs allow control of beacons, horns and other alarm events. The controllers are easy to configure and user friendly. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you