Fixed Gas Monitoring Equipment For Monitoring And Testing Near Tuvalu
-
Manufactured by AMETEK Process Instrumentsbased in USA
The MGB1000 is a micro gas blender ideal for calibrating gas analyzers, such as AMETEK Process Instruments’ ta3000 and ta5000 series, with parts-per-million (ppm) or parts-per-billion mixes of a single or mixed-component gas standard. It generates consistent and reliable fixed-point gas concentrations at blend ratios up to 4545:1. The micro volume flow path enables single-step blends ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Continuously monitor for the threat of Volatile Organic Compounds (VOCs) in hazardous locations with the fixed RAEGuard 2 PID detector. This monitor is easy to configure and maintain in the field thanks to a modular design with easy access to PID lamp and sensor, without the need for tools. The internal diaphragm pump speeds sample flow-throw and the unit delivers highly accurate readings with ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
Deploy a fixed MeshGuard wireless gas-monitoring network quickly with this complete, turnkey solution. The MeshGuard RDK includes a controller and your choice of a combination of toxic and combustibles gas monitors. This kit provides a complete self-forming, self-healing gas detection network system. Certified for Class I, Division 1 environments, the MeshGuard RDK comes in a ruggedized, ...
-
Manufactured by RKI Instruments, Inc.based in USA
Gas detection should not be complicated. The Beacon 110 is gas detection simplified. The Beacon 110 is a powerful, low cost fixed system controller for one point of gas detection. It is microprocessor controlled, versatile, simple to install and operate, and priced to be the industry's best value single gas detection controller. It is capable of accepting RKI sensors directly for LEL level ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
The FA200 Alarm Bar is part of the MeshGuard system for hazardous gas detection. The alarm device comes with one audible and four visual alarm outputs, and the alarm logic is fully configurable from the FMC 2000 multi-channel ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This gamma radiation detector is part of the MeshGuard intelligent network. Simple to install and operate, it relays radiation data to other MeshGuard nodes until the data reaches the controller and reconfigures its data path if progress is blocked. MeshGuard Gamma is available with field-replaceable, pre-calibrated sensors specifically designed to sense X-ray and gamma radiation. It is also ...
-
Manufactured by Bacharach, Inc.based in USA
The MGS-150 Gas Detector can meet almost any gas detection need with multiple sensor options for real-time monitoring of refrigerants, oxygen, combustible and toxic gases. It includes user-selectable current or volt analog outputs, allowing connectivity to most BMS, SCADA or central control systems. Status LEDs and a buzzer are integrated for local alarming while an onboard relay with ...
-
Manufactured by Bacharach, Inc.based in USA
The MVR-300 detector is specifically designed to provide continuous monitoring for refrigerants associated with high-efficiency, high volume refrigerant cooling and heating systems, such as VRF/VRV (Variable Refrigerant Flow/Variable Refrigerant Volume) sytems. Typical applications include hotels, dormitories, hospitals, office buildings, and apartment ...
-
Manufactured by Bacharach, Inc.based in USA
Bacharach’s advanced MGS-550 gas detector can utilize any combination of sensor technologies, including electrochemical, semiconductor (MOS), catalytic bead or infrared, in a single platform for unparalleled detection capability. The MGS-550 can easily be connected to any central control system using the current and volt analog output or the Modbus RTU interface. With three user assignable ...
-
Manufactured by Bacharach, Inc.based in USA
The MGS-250 family is a cost effective solution for detecting a variety of refrigerants without the limitations posed by solid-state sensor technologies. The long-life, proprietary NDIR infrared sensor allows for accurate low-level leak detection (0-3,500 ppm), delivering up to 5-7 years of maintenance-free operation without the need for costly annual gas calibrations. Infrared sensing technology ...
-
PremiumManufactured by ENVEAbased in FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
-
Manufactured by Madur Polska Sp. z o.o.based in POLAND
Photon S is madur’s most recent and most sophisticated apparatus. It was created based on portable gas analyser - Photon. As its precursor it also uses NDIR gas sensors as the main measurement method - it can have 9 of them supplemented with 4 EC cells. Along with power supply with control center and the most efficient gas dryer this modular CEMS system is available to mount in 19” ...
-
Manufactured by Madur Polska Sp. z o.o.based in POLAND
Small in size, yet very skilful analyser – it has the best capabilities/price ratio. maMoS is our alternative for large, intricate CEMS systems, as it does not fall behind them concerning functionality and abilities, and is far ahead in terms of expenses. It has modular construction, and many add-ons, that makes it easy to adjust to a very specific, individual application. Powerful PC ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
The stationary system is suitable for variable, discontinuous and continuous operation. The components built into the system can be used for standard applications. For special requirements please ask us for other ...
-
Manufactured by Ankersmid Sampling - Ankersmid Groupbased in BELGIUM
Due to various acid dew points at various applications the probe is heated up to 180°C. A filter element of 150mm is integrated, suitable for most applications up to 1g dust/m3. A significant advantage is that this filter is replaceable without dismounting the probe and without using any tools. Due to its modular design and various options, the heated sample probe covers the widest range of ...
-
Distributed by a1-cbissbased in UNITED KINGDOM
With an established reputation, the ARMS 2 is based on proven gas detection technologies with enhanced features and benefits configured to meet the specific requirements of the F-Gas Regulation. a1-cbiss have over 20 years experience in the design, manufacturing and installation of custom built gas monitoring and sampling ...
-
Distributed by a1-cbissbased in UNITED KINGDOM
The RefDetec fixed gas leak detector has been designed to meet the changing demands of stringent ...
-
Manufactured by Gas Detection (Australia) Pty Ltdbased in AUSTRALIA
The GDA 2527 Nitrogen Dioxide (NOâ‚‚) Gas Sensor is a 2 wire 4-20 mA Loop Powered device with a range of 0-30 ppm Nitrogen Dioxide. It has an electrochemical sensing unit which is temperature compensated and easily replaceable. Designed, manufactured and supported locally in ...
-
Manufactured by Gas Detection (Australia) Pty Ltdbased in AUSTRALIA
The GDA 2526 Ammonia (NH₃) gas sensor is a 2 wire 4-20 mA Loop Powered device. It has an electrochemical sensing unit which is temperature compensated and easily replaceable. Designed, manufactured and supported locally in ...
-
Manufactured by Gas Detection (Australia) Pty Ltdbased in AUSTRALIA
The GDA 2525 Carbon Monoxide (CO) gas sensor is a 2 wire 4-20 mA Loop Powered device. It has an electrochemical carbon monoxide sensor unit which is temperature compensated and easily replaceable. Designed, manufactured and supported locally in ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you