Flame Detection Manufacturers, Suppliers & Companies (Monitoring And Testing) Near Newfoundland
-
Manufacturerbased in Bethlehem, PENNSYLVANIA (USA)
GOW-MAC Instrument Co has been a leading manufacturer of high performance gas analysis analytical instrumentation.Our custom engineered gas chromatographs and and gas analyzers are used thoroughout the world by a wide variety of customers within the ...
-
Manufacturerbased in Cedar Grove, NEW JERSEY (USA)
Spectrex isn’t just a leader in Flame and Open Path Gas Detectors field. We are fully committed to enhance the safety of your employees, capital investments and to the environment. Spectrex was first to incorporate the Xenon Flash in OPGD detectors ...
SharpEye - Model 40/40UFI - Ultra Fast Triple IR (IR3) Flame Detector
The 40/40UFI, an Ultra-Fast multispectrum IR3 Flame Detector, detects hydrocarbon fuel and gas fires at long distances, and is especially designed to detect an explosive 1 ft (0.3m) diameter gas cloud explosion in max. 50 msecs for 1ft diameter ...
CONTACT SUPPLIER -
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
Signal Group Ltd develops and manufactures gas analysers for the professional testing of VOCs, vehicle and engine emissions, tobacco smoke, impurities in special gases, power plant emissions, catalyst efficiency, and boiler/burner combustion ...
Signal - Model 320 - Non-Methane Cutter
An external non-methane hydrocarbon cutter providing capability to measure methane with a standard heated flame ionisation detector (FID). The Model 320 provides a low cost alternative to “all in one” FIDs with a built in ...
CONTACT SUPPLIER -
ManufacturerDistributor in Windsor, NEW JERSEY (USA)
VIG Industries has been manufacturing, servicing, and renting Dual or Single Channel (FID) flame ionization detector based (GC) gas chromatography, (VOC) volatile organic compounds, and (THC) total hydrocarbon analyzer systems as well as other ...
VIG Industries - Model 210 - Heated Methane/Ethane/NonMethane-Ethane Total Hydrocarbon Analyzer (NMHC)
The VIG Industries, Inc. Model 210 is a microprocessor based, oven heated methane / ethane / non methane-ethane (NMEHC) total hydrocarbon analyzer for high accuracy, sensitivity and stability. The Model 210 measures methane, ethane, non ...
CONTACT SUPPLIER -
Manufacturerbased in Norwich, NEW YORK (USA)
Chentronics, LLC provides innovative, High Energy Ignition (HEI) and flame detection technology for the power generation, utility, petrochemical, industrial, marine and green environment industries. We have: More than 40 years experience and ...
Chentronics - Model IVN HE - Gas Pilot Ignition and Flame Detection Systems
Ideally suited for gas pilots, the IVN pilot ignition and flame detection system provides High Energy ignition and flame rod type flame detection in a single compact solution. The patented integration of the High Energy ignitor with a flame rod ...
CONTACT SUPPLIER -
Manufacturerbased in Spotsylvania , VIRGINIA (USA)
Iatroscan manufacturer of mounted FPD Detector. The new model IATROSCAN MK6 with FPD (flame photometric detector) detects the hetero-atoms such as phosphorous and sulfur selectively. The simultaneous measurement by both FPD and FID (flame ionization ...
Iatroscan - Model MK6 - Mounted Flame Photometric Detector (FPD)
The new model IATROSCAN MK6 with FPD (flame photometric detector) detects the hetero-atoms such as phosphorous and sulfur selectively. The simultaneous measurement by both FPD and FID (flame ionization detector) is possible. Organic compounds on the ...
CONTACT SUPPLIER -
ManufacturerOffice in Cranberry Woods Township, GEORGIA (US) (USA)
General Monitors is dedicated to benefiting society through leading-edge combustible gas, toxic gas, and flame detection monitoring products of the highest quality that protect life and property. With over 50 sales representatives around the globe, ...
Model FL3112 - Digital Frequency Infrared (DFIR) Flame Detector
The Model FL3112 is a Digital Frequency Infrared (DFIR) flame detector designed to detect unwanted fires, and provide alarm outputs directly from the detector while maintaining high false alarm immunity in onshore / offshore applications. ...
CONTACT SUPPLIER -
Manufacturerbased in Butner, NORTH CAROLINA (USA)
Falmouth Products originated in 1986 with government funded research and development projects relating to environmental cleanup. Construction of prototype catalytic oxidizers began in 1987. These prototypes were used at soil vapor extraction sites. ...
-
Manufacturerbased in Greensboro, NORTH CAROLINA (USA)
FLAMEX Inc. is a leading supplier of customized industrial process fire prevention and protection equipment. We specialize in the protection of facilities that handle combustible dusts that utilize pneumatic dust collection and air filtration ...
Flamex - Model FMX 5000 IR - Flame Detector
This Flame detector is commonly referred to as the "Triple IR Detector" because it offers a 3 channel IR analysis in the 2.0-6.0 micron range. It is designed to detect open flames that can be caused by combustion of solid or liquid materials. It is ...
CONTACT SUPPLIER -
Manufacturerbased in Acworth, GEORGIA (US) (USA)
Supplier Support International, Inc. (SSI, Inc) is the parent company of the Heat Injector. David Krupp started SSI, Inc. in July 2001 with the goal to identify problems and design products and processes to solve those problems. We currently hold ...
-
What can be achieved with a flame photometer has been redefined by BWB Technologies. With this page you can learn about the award winning Flame Photometers BWB the experts in Flame Photometry offer. With unrivalled accuracy, low cost and ease of use ...
BWB - Model XP - 5 Channel Flame Photometer
The BWB XP is the first and only 5 channel flame photometer with simultaneous detection and display of all 5 elements. The BWB XP was designed from the ground up, using new, innovative and modern technology to give unsurpassed levels of accuracy, ...
CONTACT SUPPLIER -
Manufacturerbased in Bloomington, MINNESOTA (USA)
Det-Tronics is a global leader in industrial hazard safety solutions, providing flame detection, gas detection, and hazard mitigation systems for critical industrial applications. We design, build, test, and commission certified SIL-2 capable flame ...
Air Duct option for Smoke Detector - Det-Tronics - Model Q5016 - Air Duct Smore Detector option
The Q5016 Duct Mount Accessory is designed for use with the Det-Tronics® SmokeWatch™ U5015 Explosion-Proof Smoke Detector. This accessory allows for the installation of the smoke detector into duct monitoring applications. The Q5016 Duct Mount Kit ...
CONTACT SUPPLIER -
ManufacturerOffice in Tulsa, OKLAHOMA (USA)
ClearSign Technologies provide unique solution to some of the world’s most pressing productivity, energy efficiency and pollution problems affecting the energy, oil and gas production, boiler and processing industries. ClearSign is based in Seattle, ...
-
ManufacturerDistributor in Rockwall, TEXAS (USA)
Safety Systems Technology, established in 1988, is a world class engineering and manufacturing company headquartered in Southern California and has a worldwide distribution network. SST designs and manufactures fire and gas detection and control ...
Model F130 - Multi-Spectrum IR Flame Detector
The SST Model F130 Multi-Spectrum IR Flame Detector is a high performance and high reliability self-contained unit designed for hazardous applications. 5 Year Warranty and proudly Made in the ...
CONTACT SUPPLIER -
Manufacturerbased in Plano, TEXAS (USA)
Stackmatch Flare Ignition, Inc. established in 1979, designs and manufactures Flare Pilots, Pilot Ignition Systems, Flame Detection and Controls for the Petrochemical and Oil & Gas industries. We continuously challenge basic concepts of conventional ...
Stackmatch - Model DRAM - Dual Range Air Mixed Pilot
The STACKMATCH DRAM Pilots are the only start-up solution for a Sulfur Recovery Unit ( SRU ), and are used worldwide in Pressurized Vessel and Flare applications such as Tail Gas Treatment Units ( TGTU ), Boilers, Pre-Heaters, Thermal Oxidizers, ...
CONTACT SUPPLIER -
Manufacturerbased in Addison, TEXAS (USA)
Forney Corporation manufactures front-end combustion components serving the electric utilities, chemical processing, pulp/paper and cement industries. Since its inception in 1927, Forney has expanded its product line to include igniters, burners, ...
Forney - Model IDD-II Series - Flame Detector System
The Forney IDD is the most widely used flame detector system in the USA utility market because of its rugged reliability and many years of service. The combination of a compact detector head connected to a remote, highly tunable amplifier provides ...
CONTACT SUPPLIER -
Manufacturerbased in League City, TEXAS (USA)
At GDS Corp, we understand the importance of reliable, cost-effective gas detection systems and specialize in solutions for the most challenging work environments. With over a decade of experience working with fixed gas detection systems, we design ...
GDS - Model 4040I - Triple IR Flame Detector
The new 40/40I, a multi spectrum based on three IR bands (IR3), detects fuel and gas fires at long distances with the highest immunity to false alarms. The 40/40I IR3 can detect a 1ft2 (0.1 m2) gasoline pan fire at 215 ft (65m) in less than 5 ...
CONTACT SUPPLIER -
Teledyne Gas & Flame Detection has brought together industry leading products from Detcon, Oldham Simtronics, GMI and select Scott Safety products to provide our customers with fixed-point and portable gas detectors and controllers with proven ...
Teledyne - Model Syntel - Gas and Flame Detection System
Syntel is an addressable loop system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. ...
CONTACT SUPPLIER -
Manufacturerbased in Houston, TEXAS (USA)
ESP SAFETY INC. is a company staffed by an array of professionals, including a team of experts experienced in the design and manufacture of fixed toxic and combustible gas detection, flame detectors, and complete turn-key safety systems. Our ...
IPES - Model IR/UV - Flame Detector
ESP Safety’s Model IPES-IR/UV Flame Detector provides superior sensitivity for fires from oil and petrochemical products. It is also indicated for a wide range of other fire types including metal fires. IPES-IR/UV’s advanced detection ...
CONTACT SUPPLIER -
Manufacturerbased in Fort Collins, COLORADO (USA)
For over 25 years, MICROPACK has been actively working with the oil & gas industry and are today recognised as specialists in Fire & Gas hazard detection technologies. In the early nineteen eighties MICROPACK was involved in offshore process ...
Model FS301 - Flame Simulator
The MICROPACK FS301 Flame Simulator is designed to test the correct operation of Visual Flame detectors. The FS301 Flame Simulator produces a unique flame pattern that is recognised by the visual flame detector and produces an alarm output. Based on ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you