Flame Detection Equipment For Monitoring And Testing Available In Idaho
-
ShowcaseManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
Finally, a Flame Photometer specific to your needs. The first simultaneous Flame Photometer with built in compressor and configurable element analysis to your requirements. The BWB Flash is the first and only fully configurable up to four channel flame photometer that detects and displays all calibrated ions at the same ...
-
ShowcaseManufactured by Chromatotec Groupbased in FRANCE
Due to the large number of Volatile Organic Compounds (VOCs), there is a need to combine their separation and quantification by Gas Chromatography (GC) with Flame Ionization Detection (FID) and their individual identification by Mass Spectrometry ...
-
PremiumManufactured by ECO Physics AGbased in SWITZERLAND
The Pure Air Generator PAG 003 is your source of efficient and reliable zero air. It eliminates the need for ultrahigh-purity zero air cylinders. The PAG 003 is specifically designed for CLD analyzers measuring sub ppb levels. Other trace gas analyzers benefit as ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is an ultra high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The ZAG is a powerful stand-alone unit, so there is no need for you to worry about an external compressed air supply or dangerous and expensive gas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Whether you need an infrared or catalytic bead sensor to detect combustible gases or an electrochemical sensor for a toxic environment, the Meridian universal gas detector utilizes a single detector head to easily accept all sensor types. There is no requirement for distinct personality boards in the gas detector or different detector heads to make the instrument behave as a combustible or toxic ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
AQMS-100 is an on-line monitoring product that measures VOCs (volatile organic compounds) content and dust of atmospheric. The system uses advanced intelligent component analysis algorithm and flame ionization (FID) detection technology, gathering gas, processing, analysis, storage and upload real-time measurement data by high-precision AD sampling to monitor the concentration of total VOCs and ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
A gas analyser using flame detection with a catalytic methanator module to analyse CO and CO2 for monitoring gas purity and electronic gas measurement. A 19" inch rack mountable chassis, 4U high. It has the ability to be used as a fully integrated system for automatic sample analysis as well as it is transportable for use at various sites. Our application flexibility allows the chromaCO start up ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The Spyglass family of triple IR and UV-IR flame detectors provide top-tier optical flame detection with faster detection time and performance over long distances. Spyglass™ flame detectors also have industry leading false alarm immunity to several challenging environments while performing in adverse ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 7000 Zero Air Generator is a high purity air generator system that is capable of continuous delivery of up to 20 standard liters per minute (SLPM), 30 pounds per square inch (PSI) of dry, contaminant-free air. The Environics ZAG will produce high purity zero air from your dry compressed air source, eliminating the need for expensive, dangerous and bulky gas ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
An autoGC-trap-FPD for low sulfur quantification. airmo S is a fully automatic isothermal gas Chromatograph for the analysis & monitoring of sulfur compounds with Sulfur Specific Detector. This solution is specific for application where low sensitivity on sulfurs must be reached. This auto GC uses a valve with 1 sample trap, and metallic capillary ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Solution for Total THC Measurements: Gasmet Flame Ionization Detector (GFID) is designed for continuous total hydrocarbon (THC) measurements. GFID analyzer offers a TÜV certified solution (QAL1) for measuring pollutants from hot, wet and corrosive gas ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
This collection of probes and accessories, complements Teledyne Gas & Flame Detection’s portable gas instrument range. Delivering enhanced solutions to your gas detection requirements. ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Automated online analysis & monitoring of Sulphur Compounds: H2S / COS / CS2 / SO2 / RSH Chroma S is a fully automatic isothermal gas Chromatograph for the analysis & monitoring of sulphur ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
Continental Controls Corporation’s Gas Substitution System (GSS) is an innovative product that allows diesel engines to operate on a combination of natural gas and other low-cost gases, such as biogas, landfill gas, or digester gas with traditional diesel fuel. The GSS system is designed to provide reliable and efficient combustion control for these blended gases while maximizing fuel ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled. The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The Acme GasPost toxic gas sensor/transmitter measures the concentration of the target gas in an enclosed area and produces a proportional analog output ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Bringing together the latest data logger and alarm unit for gas and flame detection systems, the MX 62 TP features an innovative HMI interface specifically designed to facilitate user-controller interactions. This interaction is simplified by a large, fully interactive 10" (up to 15") high-definition colour touchscreen, allowing for clearer visualisation of critical gas detection data. ...
-
PremiumManufactured by BWB Technologies Ltd.based in UNITED KINGDOM
This powerful and growing global industry now has the attending facilities for Synthetic Fuels or Bio-Fuels production. For this derivative product BWB Technologies offers a hybridized Flame Photometer we have named Syn Fuels. The BWB SYN FUELS Flame Photometer is the first and only 4 channel flame photometer with simultaneous detection and display of all 4 elements. A high quality and high ...
-
PremiumManufactured by Hangzhou Zetian Technologybased in CHINA
GCOM-5000 Portable NMHC Analyzer mainly consists of two parts: sampling probe and analyzer host. Sampling probe is divded into high-temperature type and normal-temperature type, respectively applied in in-situ sampling for gases in high-temperature flue and selective sampling for ambient air under normal temperature. The analyzer host mainly includes GC-FID analysis module, gas cylinder, sampling ...
-
PremiumManufactured by J.U.M. Engineering GmbHbased in GERMANY
The HFID Model VE572 is a reliable and rugged Dual Channel Sequencing heated total hydrocarbon analyzer for low drift, high accuracy, sensitivity and stability. It uses our time proven hydrogen flame ionization detector (FID) in a heated oven to prevent the loss of high molecular weight hydrocarbons and to provide reliable performance in the analysis of high concentrations down to trace levels of ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you