Flame Detection (Flame Detection) Equipment
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Syntel is an addressable loop system suitable for use in zone 1 and 2 hazardous areas. The complete addressable loo is fault tolerant operating normally with a short or open circuit. Syntel does not have a CPU, so there is no common failure point. It includes a standard OPC interface and can also be supplied by Modbus allowing easy integration with third party systems. Syntel stores alarm and ...
-
PremiumManufactured by ENVEAbased in FRANCE
One of the sole QAL 1 certified FID analyzers on the market, also available in a transportable version for the measurement of: THC or simultaneous THC, nmHC & ...
-
Manufactured by Safe-Fire, Inc.based in USA
Accurately detects burner flames at various stages of boiler startup and operation. Delivering superb flame discrimination via a highly sensitive optical sensor, high temperature resistance, and automatic self-checking, the EZ-Flame detector maximizes safety and minimizes maintenance ...
-
Manufactured by Kryotek Inc.based in CANADA
An advanced flame detection sensor with a wide variety of applications. With hotter, drier summers leading to increased fire size and density, wildfire is becoming a greater danger than ever before. That’s why we developed FireSpy to keep a watch on your property when you’re not home. A proprietary blend of sensors and ...
-
Manufactured by Rel-Tek Corporationbased in USA
WellBoss – Enhance the safety of your oil/gas operations at low cost and with virtually zero maintenance. The WellBoss helps protect your investment, while saving lives and being a good neighbor. Portable -- It’s a skid mounted, transportable gas and flame detection system can be set up quickly on a oil/gas drilling site. ...
-
Manufactured by sglux GmbHbased in GERMANY
UV broadband (UVA+UVB+UVC) photodetector with integrated logarithmic amplifier. TO5 hermetically sealed metal housing with lens cap. designed for hydrogen flame detection according to EN298. 0 … 1 V signal output. typical irradiation intensity 0.05 nW/mm² … 10 nW/mm². ...
-
Manufactured by Micropack Detectionbased in USA
The MICROPACK Flame Detection System Hub Controller (iHub48516) is used to provide an communication interface between MEL field devices, such as Visual Flame Detectors, other MEL equipment such as video switchers and relay cards, and non-MEL equipment such as fire panels and PCs. MICROPACK no longer manufacture this unit, however it is ...
-
Manufactured by General Monitors by MSAbased in USA
Modular system offering the widest range of control cards for use in an integrated fire and/or gas detection system.Depending on how it is configured, a Zero Two Series system can monitor any combination of the following: combustible gas, H2S, toxic gas, oxygen deficiency and flame detection. In addition, its open architecture allows the ...
-
Manufactured by Micropack Detectionbased in USA
The Micropack CCTV Flame Detection System Relay Driver (relay driver) is used to interface CCTV Flame Detection System external devices, such as plant actuators. The relay driver has been designed specifically for the CCTV Flame detection system and is compatible with the CCTV RS485 ...
-
Manufactured by Oil & Gas Technologies (OG-TECH)based in FRANCE
Detects potential fires even before they occur by monitoring equipment for temperature increase. Detects H2 and methanol flames. Easy to install, IP ...
-
Manufactured by Chentronics, LLCbased in USA
Ideally suited for gas pilots, the IVN pilot ignition and flame detection system provides High Energy ignition and flame rod type flame detection in a single compact solution. The patented integration of the High Energy ignitor with a flame rod delivers reliable performance and simplifies ...
-
Manufactured by Safe-Fire, Inc.based in USA
The W-Flame is a fully integrated optical flame detection system that is ideal for monitoring single and multiple burner applications in the petrochemical, metallurgical, power generation, and Pulp & Paper industries. In the integral configuration, the detector and signal amplifier are combined into a single assembly, which ...
-
based in USA
The evolution continues with the new X9800 IR Flame Detector. Approved to FM 3260 (2000), the X9800 meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The detector is equipped with both automatic and manual optical integrity ...
-
based in USA
The Q5016 Duct Mount Accessory is designed for use with the Det-Tronics® SmokeWatch™ U5015 Explosion-Proof Smoke Detector. This accessory allows for the installation of the smoke detector into duct monitoring applications. The Q5016 Duct Mount Kit and spare parts are sold separately from the SmokeWatch U5015 smoke detector. There are many different models of SmokeWatch U5015 explosion-proof ...
-
Manufactured by Micropack Detectionbased in USA
The MICROPACK FDS301 is an explosion proof visual flame detector. It processes live video images to detect the characteristic properties of flames visually, by means of its FM and SIL 2 certified flame detection algorithms and on-board digital signal processing. It is the safest and most advanced ...
-
based in USA
The Det-Tronics PM-5MPX Dual Spectrum flame detector is optimized for the rigorous semiconductor fabrication industry, which is beset with many hazards that result in stringent requirements for fire protection safety systems. Flame detection requirements for this industry are specific: Factory Mutual Approvals (FM) addresses the detailed ...
-
based in USA
The evolution continues with the new X2200 UV Flame Detector. Approved to FM 3260 (2000), the X2200 meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The detector is equipped with both automatic and manual optical integrity ...
-
based in USA
The evolution continues with the new X5200 UVIR Flame Detector. Approved to FM 3260 (2000), the X5200 meets the most stringent requirements worldwide with advanced detection capabilities and immunity to extraneous sources, combined with a superior mechanical design. The mounting arrangement allows the UV and IR sensors to monitor the ...
-
based in USA
Prevent unnecessary costly operational shutdowns with the enhanced X3301 Multispectrum Infrared Flame Detector. From refineries to turbines, offshore exploration/production to hangars, FPSOs to fuel storage, let the X3301 protect your personnel, assets and ...
-
Manufactured by Micropack Detectionbased in USA
Designed for hazardous industries where fast optical flame detection is critical and nuisance alarms are not an option! The MICROPACK FDS300 is an explosion proof visual flame detector. It processes live video images to detect the characteristic properties of flames visually, by means of its ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you