Flammable Gas Detection Equipment For Monitoring And Testing Available In Ontario
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The DG7 Series is a group of intelligent gas detectors employs a wide choice of sensor types. The DGI -TT7-E is used for Toxic gases or Oxygen monitoring. The DG-TT7-S is a solid-state metal oxide semiconductor. The DG-TX7 employs a pair of OXYCOL catalytic sensors. All DGi-TT7 are constructed from a common housing and electronics with the detection properties being determined by the type of ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The OLC 10 and OLCT 10 are designed to detect combustible or toxic gases for tertiary applications (boiler plants, battery charging rooms, car parks, hospitals). Two OLC 10's can be connected to one detection channel to monitor the same area, without an additional junction box or extra wiring. Similarly, up to five OLCT 10's can be connected to one channel for the detection of CO, NO or NO2 in a ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The EX-TEC PM 400 is a mobile gas warning device that reliably warns plumbers, staff from utility companies, network operators, fire services and other technical staff of dangerous gas concentrations. The compact device is available with various sensors and, even in its most basic version, allows you to monitor flammable gases. The range of gases that can be detected make the EX-TEC PM 400 ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The First Responder is a combustible gas indicator designed for emergency response technicians in the gas industry. The First Responder detects flammable gas at PPM, LEL and % Vol levels with the addition of carbon monoxide for internal atmosphere monitoring. An optional external range diffusion probe with high speed semiconductor sensor enables rapid response in detecting small fitting ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The GT-Fire is a dedicated hand-held methane detection meter specialized for the fire industry. This user-friendly meter has an ergonomic design coupled with a rugged polycarbonate construction that ensures durability and ease of operation as standard. The GT-Fire allows leak detection to be conducted for flammable (PPM & LEL) gases as well as Carbon Monoxide (CO), Oxygen (O2), and Hydrogen ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The Leaksurveyor uses a fast response semiconductor sensor reducing the time taken for gas leak surveys on gas distribution networks. The Leaksurveyor detects flammable gas from PPM through LEL to 100 % ...
-
Manufactured by Norseman LLCbased in USA
A variety of hazardous location lights for different ...
-
Manufactured by Norseman LLCbased in USA
A necessity for hazardous location ventilation ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The touch screen operator interface, allows the operator to view, access, and control multiple remote analyzers from a convenient, central location. It is a panel-mounted, multi-page interface device, with touch-sensitive graphics for easy operation. It allows an operator to acknowledge and reset alarms, and through password protection, calibrate, read and adjust the settings of each analyzer. ...
-
Manufactured by General Monitors by MSAbased in USA
The IR5500 is an open path infrared (IR) gas detector that continuously monitors for flammable gas leaks over large open areas. It monitors in both the LEL-m and ppm-m ranges to detect both small and large leaks. The IR5500 offers the benefits of early detection with its high sensitivity to gas concentrations at the ppm levels. This feature allows it to alarm faster than an LEL-only detector. ...
-
Manufactured by TQ Environmental LTDbased in UNITED KINGDOM
The GD129 3-wire Infra-Red flammable gas detector is a cost effective, low maintenance, accurate means of monitoring flammable gasses. In the 0-100% LEL or % Volume ranges Methane, Propane, Butane, Pentane can all be monitored. The sensor is immune to poisoning and high gas concentrations. Available with Duct or Bulkhead mounting options, the sensor has many applications. With a protection ...
-
Manufactured by Trolex Ltdbased in UNITED KINGDOM
Fixed gas detection for point source hazards and perimeter protection in arduous duty and exposed locations. Suitable for use in SIL 1 and SIL 2 applications, in accordance with any conditions or ...
-
Manufactured by Advanced Micro Instruments, Inc. (AMI)based in USA
The MODEL 60 is a Percent Oxygen Analyzer for flammable and non-flammable gases in a general purpose environment. The unit functions as a standalone sensor and utilizes patented oxygen sensor technologies to deliver fast, reliable readings. As a low cost solution, the MODEL 60 cannot connect to the COMMAND CENTER software or access any AMI advanced ...
-
Manufactured by Control Instruments Corporation (CIC)based in USA
The Fuel Changeover System is a wall mount dual-input, auto-changeover, gas control and pressure regulation system. It operates so that when a primary fuel tank is depleted, the system automatically begins to draw from a secondary tank to ensure an uninterrupted supply of fuel to the ...
-
Manufactured by Henan Konli Environmental Sci-Tech Co., Ltdbased in CHINA
Detonation cleaning system is a new technology to remove soot on heating surface of ...
-
Manufactured by Agilent Technologies, Inc.based in USA
Agilent advances the field of atomic spectroscopy with the introduction of the 4100 Microwave Plasma Atomic Emission spectrometer (MP-AES). It runs entirely on air. Your lab can perform unattended multi-element analyses, eliminating flammable and expensive ...
-
Manufactured by Henan Chicheng Electric Co., Ltd.based in CHINA
The GC510 Detector Flammable Gas Detector is a detector that continuously detects flammable gases in the operating environment. It is suitable for explosion-proof gas leakage rescue, underground pipelines or mines, etc. It can effectively ensure the safety of workers and the production equipment is not damaged. The detector can sample the gas in the area to be tested by the optional internal air ...
-
Manufactured by Gastron Co. Ltd.based in SOUTH KOREA
Continuous detection of Flammable gas in explosion hazardous area with flame proof structure. Self diagnosis function with built-in Microprocessor. Easy replacement with a cartridge type sensor. Digital flow sensor to maintain regular flow rate. Fast response of gas leakage with a high efficient pump inside. Low concentration VOC gas detection by PID ...
-
Manufactured by Martek Marinebased in UNITED KINGDOM
The MM5001™ gas detector is a permanently installed, integrated sequential gas sampling system which can be used for detecting and providing alarms in the presence of explosive and toxic gases in ballast tanks, void spaces and cargo tanks. This is in line with the three core pillars of Martek Marine; ship safety, performance and crew ...
-
Manufactured by Henan Weiguo Intelligent Technology Co., Ltd.based in CHINA
Product Description: Trax20 series product adopt high quality gas sensor and MCU technology, has good repeatability and stability. It is widely used in the fields of oil processing plants, chemical factories, metallurgy, power plants etc. With 4-20mA signal output, it can be connected with the central control panel. It can be widely used in the industrial automation of gas detection for ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you