Flow Calibration Applications available in New Mexico
-
Premium
Continuous Emissions Monitoring Calibration Systems (CEMCS)
The Environics Series Continuous Emissions Monitoring Calibration Systems (CEMCS) have been used in CEM vans and laboratories for over twenty years. They meet or exceed the performance requirements of the United States EPA 40 CFR Part 51 Method 205 Appendix M. Our systems are custom built, computerized, mass flow controller based gas calibration systems which allow you to dilute a single high concentration cylinder of span gas to low levels for the calibration of gas analyzers. ...
By Environics, Inc. based in Tolland, CONNECTICUT (USA).
-
Premium
AER-200 respirometer system for anaerobic applications sector
The CHALLENGE AER-200 Respirometer System consists of one or more biological reaction vessels, gas flow measuring cells, and a computer. The gas measuring base contains eight flow ceHs and associated interconnecting circuitry. As gas flows through each cell under the influence of a slight pressure caused by gas production in the reaction vessel, bubbles of a fixed volume are formed in the lower section of the cell. These bubbles in turn pass through a detection section where a counter is activated. Finally, the ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Facilities management in line air flow meter solutions
Sierra’s offers a complete line of precision flow solutions for any gas, liquid or steam measurement to improve energy efficiency in all facilities management applications. Our mass vortex meters are used to allocate steam, our in line thermal mass flow meters track and allocate natural gas and compressed air usage, and our clamp-on and insertion ultrasonic meters provide accurate water and water-based fluid measurement. ...
By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Thermal Mass Flow Meter for Meter Calibration
A critical portion of any thermal mass flow meter is the factory calibration. The flow rate measured by the thermal flow meter is an inferred measurement. The instrument actually measures the power required to maintain the desired overheat temperature of the heated sensor above the reference sensor. This relationship between power and mass flow rate is established during the calibration. While considerable effort is made in the design and building the sensors, each sensor has slightly different heat transfer ...
By Sage Metering, Inc. based in Monterey, CALIFORNIA (USA).
-
Emission monitoring for cement plants
Kurz Thermal Insertion Mass Flow Meter systems provide proven accuracy and reliability in the most difficult of EPA Title IV applications with the ability to survive for long periods of time without ...
By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).
-
Water monitoring instruments for oil and gas
We can offer you systems that are capable of operating in the harshest of environments. We design and manufacture a range of systems that meet some of your industries most challenging ...
By Ovarro based in Eckington, UNITED KINGDOM.
-
McCrometer flow meters for municipal water application
Thousands of instrument engineers at municipal wastewater facilities and industrial process plants with wastewater treatment operations have found McCrometer flow measuring devices provide superior accuracy, long life, trouble free installation, and low total cost of ...
By McCrometer, Inc. - Veralto based in Hemet, CALIFORNIA (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you