Flow Calibration Equipment For Monitoring And Testing Available In Nova Scotia
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93B BASIC insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures that vary up to ±100°F. The FLT93B is easily field-configured, providing unparalleled ...
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6100 automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, O3, hydrocarbons and other gases of interest. The system consists of a single chassis supporting up to three (3) thermal mass flow controllers, an ozone generation module, a mixing zone, a reaction chamber for gas phase titration and control electronics. The instrument ...
-
PremiumManufactured by Sommer Messtechnikbased in AUSTRIA
Discharge measurement via tracer dilution method for sewage - fluorescence. The discharge measurement is performed by using the well-established tracer-dilution method and is especially suitable for big volumes of water. It is used a fluorescent material as tracer. When using the tracer in sewage water most often a continuous insertion of a known amount of tracer is done. Two optical fluorescence ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400M (100-120VAC) and the T8400ME (200-240VAC) Series Air Samplers are high volume air samplers with two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The T8400T (100-120VAC) and the T8400TE (200-240VAC) Series Air Samplers are high volume air samplers with a two stage, thermally protected electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated in cubic ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93S insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The ACU-SOL Solar Powered Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 32 gpm (2 L/s) to a maximum of 4 000 gpm (250 L/s) for upstream water levels varying from 0 to 40 feet (12 m). The ACU-SOL Solar Powered Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s steel constructed, two-component polyurethane painted Air Flow Calibrator (AFC) housings incorporate a precision machined venturi tube to create a pressure differential across a fixed orifice. By varying the air flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model NG-80 Mercury Monitor is designed for automated analysis of natural gas streams. The system contains an atomic fluorescence detector, dual stage thermal desorption, with digital data acquisition and control systems. The system complies fully with ASTM-D6350 and ISO 6978 methods with built-in automated QA/QC method protocols. This integrated solution uses specialized sampling ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases. The MGC101 system automatically performs zero, precision, span and multi-point calibrations using NO, NO2, SO2, CO, 03, hydrocarbons and other gases of interest. It meets all U.S. environmental protection agency ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The importance of corgon monitoring. We provide flow meters to measure corgon, a mixture of argon and CO2. Corgon is used for instance to optimize the welding process and to increase your weld quality. Prevent waste and inefficient usage of Corgon, as Corgon is an expensive gas. Our Corgon flow meters are easy-to-use and versatile. Get your flow meter in a complete start kit with all you need to ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-5000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The unit incorporates a maintenance free, 2 or 3 stage centrifugal blower powered by a brushless, variable speed maintenance-free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The VORTAB VFK Field Tab Kit flow conditioner provides a low pressure loss solution to flow profile irregularities caused by elbows, valves, blowers, compressors and other disruptions that commonly occur in piping and duct ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The H8400 (100-120VAC) and the H8400E (200-240VAC) Series Air Samplers are high volume air samplers with a two stage, electric motor driven vacuum blowers. The motor driven blower is mounted in a very durable lightweight plastic polypropylene housing, mounted to a sturdy base plate, having non-skid rubber feet. An optional portable flow-monitoring gauge calibrated in cubic feet per minute (CFM) ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The BRL-3000M & BRL-3300M Series Retro-Fit Kits are for the conversion of Brushed, Shelter Type, High Volume units to complete Manual Speed Flow Controlled, 2 or 3 Stage Brushless Blower High Volume Air ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
These High Volume Air Samplers are housed in a clear-anodized aluminum outdoor shelter. The Brushless, two or three stage centrifugal fan blower can be used for particulate sampling with either a 4” diameter or 8” x 10” filter paper holder. The blower motor has a variable speed control feature which allows the operator to select a flow rate up to the capacity of the pump. Select ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The dynamic calibrator is based on the microprocessor technology and the multi-channel gas calibration equipment developed specifically for precise gas analyzer. Adopting the high precision quality flow controller and standard gas, the calibration standard gas is provided for the zero and span test of multiple gas parameters, which can provide four air sources simultaneously. The dynamic ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 6113 is the ideal system for those looking for a standard for ozone monitoring and reporting programs who need the ability to measure external ozone sources. Units consists of a single chassis supporting a thermal mass flow controllers, an ozone generation module, photometer, static mixer and control electronics. Like the Series 6103, the Series 6113 may also be ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you