Flow Calibration Equipment For Monitoring And Testing Available In Cape Verde
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93B BASIC insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures that vary up to ±100°F. The FLT93B is easily field-configured, providing unparalleled ...
-
ShowcaseManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93C insertion and inline type flow switch is specifically designed for use in sanitary and hygienic process applications. Its 20Ra finish, available with either mechanical polish or electro-polish finishing, is suitable for applications in food, beverage, pharmaceutical and other clean processes. FCI is the only thermal manufacturer providing temperature compensation to ensure set point ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93L inline type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures that vary up to ± 100°F. The FLT93L is easily field-configured or factory preset, providing ...
-
PremiumManufactured by Environics, Inc.based in USA
Purity of calibration gases is assured with the Series 4040 Ultra-High Purity (UHP) Gas Dilution System. Manufactured with metal seal MFC’s and orbitally welded joints, the system has minimal dead volume and maintains a low leak rate to prevent atmospheric contamination of gas calibration standards. An ideal system for providing those in the semiconductor, aerospace, research/biotech and ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model DFHV-1DTE digital high volume air samplers provide simplicity of operation and improved accuracy. This model features a 1000 watt brushless vacuum blower, digital flow measurement, elapsed time and accumulated volume measurement capability. It has a bright LED display and a four button keypad. Various flow and volume engineering units are available for selection at the time of order ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Notable Features: One Calibrator: Multiple Flow Sensors. Vacuum Fluorescent Display (4 lines×24 characters). 4 button key pad for stand alone operation. Mass flow or Volumetric flow. Volume Totalization Feature. Operator selectable Reference T and P. Operator selectable engineering units. Multi gas option. ± 1.0% Full Scale (F.S.) Accuracy. User customizable calibration report. ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4040 is a computerized gas dilution system that automatically generates precise gas standards for rapid multi-point calibration of analyzers. The gas mixes can be used in generating precise gas calibration standards, creating gaseous atmospheres or producing gas mixes for analytical research or production purposes. The Series 4040 can produce gas concentrations from ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The VORTAB VMR Meter Run flow conditioner provides a low pressure loss solution to flow profile irregularities caused by elbows, valves, blowers, compressors and other disruptions that commonly occur in piping and duct runs. The VSR Meter Run configuration is available for those applications that require lengths shorter than the VMR ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The most flexible calibrator design available for laboratory or field use. Mobile venturi tube feature eliminates difficult set up positions during ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The TRU-FLO Compact Regulator System is designed to maintain a constant and accurate flow (+/- 5%) from a minimum of 160 gpm (10 L/s) to a maximum of 7 100 gpm (450 L/s) for upstream water levels varying from 0 to 26 feet (8 m). The TRU-FLO Compact Regulator has been used for flow control in combined sewer systems (CSO), sanitary sewer systems (SSO) and effluent from batch process plants and is ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
ST80 is a high performance, rugged thermal dispersion technology air/gas flow meter that combines ultra-reliable, feature-rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST) with the industry's most extensive selection of application-matched flow sensors, including FCI's new "wet gas" flow element, to provide a truly superior solution for industrial processes and plant ...
-
PremiumManufactured by ENVEAbased in FRANCE
The MC-3000 generates a continuous stream of a mercury vapor loaded gas in order to check or calibrate mercury analyzers. An exactly adjustable carrier gas stream (normally air or nitrogen) is loaded with mercury in a first step. In a second step the gas is supersaturated by cooling. Subsequently the excess mercury is condensed in a special cell to get exact saturation. The gas is then diluted, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model DFHV-1DTSE digital high volume air samplers provide a durable brushless motor with the simplicity of operation and improved accuracy. This model features a motor cooling fan within the motor housing, digital flow measurement, elapsed time and accumulated volume measurement capabil-ity. It has a bright LED display and a four button keypad and automatic flow control. The brushless motor ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93F insertion type FlexSwitch for flow and temperature monitoring represents the first true technological breakthrough in thermal technology in over a decade. This product was designed for heavy industrial environments including high temperature and high pressure. FCI is the only thermal manufacturer providing temperature compensation to ensure set point accuracy for process temperatures ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
Due to the variable speed flow rate control, brushless maintenance free blower and portability, the CF-1512-VBRL is considered to be “The Ideal External Battery Operated Air Sampler”. The brushless blower used in the CF-1512-VBRL draws a maximum of 3.0 Amps at 6.5 CFM, permit-ting longer sampling times on a single battery charge. For higher maximum flow rates, with minimal Amp draw, ...
-
PremiumManufactured by Environics, Inc.based in USA
The Environics® Series 4020 can mix up to seven (7) component gases simultaneously to generate precise gas calibration standards and gaseous atmospheres in a broad dynamic range. The dilution capabilities of the Series 4020 allows dilution ratios from 1:1 to 10,000:1 (with larger ranges possible, depending on the configuration of the system). It provides a low cost, computerized gas ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q Environmental Products Company’s steel constructed, two-component polyurethane painted Air Flow Calibrator (AFC) housings incorporate a precision machined venturi tube to create a pressure differential across a fixed orifice. By varying the air flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is certified and ...
-
PremiumManufactured by Grande Water Management Systems Inc.based in CANADA
The SURE-FLOAT Floating Regulator System is designed to maintain a constant and accurate flow from a minimum of 80 gpm (5 L/s) to a maximum of 480 gpm (30 L/s) for upstream water levels varying from 0 to 20 feet (6 m). The SURE-FLOAT Floating Regulator has been used for flow control from settling ponds, tailings ponds, sedimentation tanks, storm water detention tanks, reservoirs and basins as ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model DFHV-1DT digital high volume air samplers provide simplicity of operation and improved ac-curacy. This model features a 1000 watt brushless vacuum blower, digital flow measurement, elapsed time and accumulated volume measurement capability. It has a bright LED display and a four button keypad. Various flow and volume engineering units are available for selection at the time of order ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you