Showing results for: Air Flow Monitoring (Flow Calibration) Equipment
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The V-FLO-XX series units incorporate a flowmeter and a precision-machined venturi tube to create a pressure differential across a fixed orifice which floats the indicating ball in the flowmeter. By varying the flow velocities, the pressure differentials are measured & recorded against a laminar flow element whose calibration is ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The F&J Ultra High Volume Air Sampling System incorporates a 46 cm x 57 cm filter holder with a heavy duty centrifugal blower, automatic flow control and the F&J Global Air Sampling System flow measurement electronics. The system is mounted onto a heavy duty metal skid with a modular design to facilitate servicing of ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
This "Golf Cart" type unit can be used for the assay of both particulates and gaseous radioiodine. Its telescoping "Goose Neck" allows for industry standard breathing zone air sampling. There is a 3/8" female Quick Disconnect fitting at the sampling inlet which accepts all "RV" series filter holders. Two vacuum gauges for measuring ...
-
Manufactured by Flow Systems Incbased in USA
The manual version of the Automotive Mass Air Flow Sensor (MAFS) Test Stand is an air flow measurement test stand designed for setting and measuring the mass flow rate of through Mass Air Flow Sensors and other induction ...
-
Manufactured by deconta GmbHbased in GERMANY
The Air sampling device airsampler serves to draw in a defined volume flow through an air sampling filter. The filters are analysed in a laboratory. The permanent regulation of volume flow, as well as calibrated sensors and a laminar element flow constitutes the basis for a precise measuring. The airsampler ...
-
Manufactured by deconta GmbHbased in GERMANY
The Air sampling device airsampler serves to draw in a defined volume flow through an air sampling filter. The filters are analysed in a laboratory. The permanent regulation of volume flow, as well as calibrated sensors and a laminar element flow constitutes the basis for a precise measuring. The airsampler ...
-
Manufactured by Degree Controls Inc.based in USA
UAS1000 air velocity and temperature sensors are designed for single or multi-point measurement, and feature a convenient USB output for direct connection to a PC or our °C Port data acquisition instruments. UAS sensors offer unimpaired access to tight locations, improved measurement accuracy, ease of installation, and a variety of sensor ...
-
Manufactured by Flow Systems Incbased in USA
The Flow Controller FC500-FC is an airflow test measurement and flowrate control solution which: Combines the flow measurement, flow control, and logging functionality of the FC500 with a multiple sonic nozzle array, can measure flowrates and control flowrates through the included sonic nozzle arrays, operates as a stand-alone devices or ...
-
Manufactured by The Energy Conservatory (TEC)based in USA
The development of the Minneapolis Duct Blaster has revolutionized performance testing of forced air distribution systems for builders, HVAC contractors, and in a variety of utility ...
-
Manufactured by The Energy Conservatory (TEC)based in USA
The development of the Minneapolis Duct Blaster has revolutionized performance testing of forced air distribution systems for builders, HVAC contractors, and in a variety of utility ...
-
Manufactured by Flow Systems Incbased in USA
The FC175 is a portable airflow test measurement instrument for measuring flow. The system consists of a data acquisition system, pressure transducers, temperature sensors and optional dewpoint or relative humidity sensor. This flow computer computer: measures flowrates using sonic nozzles including (multiple sonic nozzle arrays) and ...
-
Manufactured by Ameritrol Inc.based in USA
The FD flow switch features the same no moving part priciple of operation as is the lowest cost switch we offer. The low cost is achieved by limiting the process connection to 3/4″ MNPT and power input to 24 VDC. The sensor head is type 316L Stainless Steel and the output is an SPDT relay. The FD flow switch works using thermal ...
-
Manufactured by Burak Metering Pvt Ltdbased in INDIA
Thermal mass flow meters are well known asthermal dispersion mass flow meters. It comprises a descent of instruments for the measurement of the total mass flow rate of primary gases flowing through closed conduits pipes and ...
-
Manufactured by Kurz Instruments, Inc.based in USA
The Model 2443 Portable Air Velocity Meter uses the Metal-Clad 'MC' sensor. It is designed to be used in industrial ventilation and process applications in which a small, rugged sensor is required. Most applications are for velocity traverse in small to moderately sized pipes and ducts. The sensor support is 3/8' diameter, 13' long with a ...
-
Manufactured by Kurz Instruments, Inc.based in USA
The Model 2444 is a rugged, industrial quality portable air velocity meter for a wide variety of velocity measurement applications in pipes and ducts. It uses the well- respected Kurz FD Fast-Dual MetalClad sensor and can be used at temperatures to 200°C. It is extraordinarily flexible as it can be extended in the field to accommodate ...
-
Manufactured by TCR-Tecorabased in ITALY
Echo Hi-Vol is a “stand alone” automatic instrument designed to be used outdoor even in severe weather conditions. The Venturi gas meter used is made according to ISO 5167 standards. This kind of gas meter gives many advantages compared to other flow measurement systems: the measures stability in the long term, the capability of ...
-
Manufactured by Kurz Instruments, Inc.based in USA
The Model 2445 Portable Velocity Meter is a rugged, portable air velocity meter for a wide variety of very high temperature (500°C) industrial applications. The Model 2445 is mainly used for velocity, flow rate and temperature traverse measurements in larger pipes, ducts and stacks. Most applications are coal-fired power plant stacks, ...
-
by ES Systemsbased in GREECE
ES Systems has developed a series of board mountable pressure sensors targeting a variety of markets requiring high resolution and accuracy for gas pressure measurements. The ESCP-BMS1 is a silicon capacitive pressure sensor with state-of-the-art performance and exceptional quality. The MEMS pressure sensor die is underpinned by ES’ innovative SOI-surface micromachining ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you