Flow Control Valve Equipment For Monitoring And Testing Near Marshall Islands
-
Manufactured by Hydroflux Pty Ltdbased in AUSTRALIA
HiFlowTM can be provided with a single or multiple sludge removal hoppers. In larger systems the use of multiple hoppers results in a reduced tank height and hence a cost benefit. The hoppers can be fitted with mixers to provide effective and reliable sludge removal. This ensures that no dead zones develop and is ideally suited to sticky or viscous sludge streams. Each hopper is fitted with an ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RF and 206-RF rate of flow control valves are based on the 106-PG or 206-PG main valves. The valve is ideal for limiting the flow to a pre-determined maximum (via maintaining a continuous pressure differential across an orifice). When the pressure differential is less than the set-point, the valve opens, allowing flow to meet predetermined demand. At the desired maximum set-point, the ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-A-Type 1 and 206-A-Type 1 altitude control valves are based on the 106-PG or 206-PG main valve and are ideal for maintaining a preset maximum water level. The valve functions as a two position control valve, either fully open or fully closed. The Type 1 allows normal forward flow to fill the reservoir to the maximum level and then closes drip-tight at the set-point. It opens to allow ...
-
Manufactured by Mueller Water Productsbased in CANADA
The X107 position indicator stem is designed to provide direct indication of the diaphragm / inner valve position. The indicator stem moves up and down within its protective hexagonal brass housing. Within the housing is clear Pyrex sight glass, which allows viewing from both sides. Singer main control valves are designed with a separate stem cap that makes installation of the X107 safe and ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Singer models 106-2SC-MV and 206-2SC-MV electronic flow control and metering valves are based on the 106-PG or 206-PG main valve. The pressure in the upper operating chamber is controlled by operating the pilot solenoids. The PLC within the MV1-TP control panel determines whether the opening solenoid or the closing solenoid is operated. The change in valve position is dependent upon which ...
-
Manufactured by Mueller Water Productsbased in CANADA
Micrometer flow control valves allow for precise flow control. There is full flow in one direction and adjustable restricted flow in the opposite direction. They are standard on certain models, such as BPC pump control valves and available as an option for other applications. Standard end connections are female-to-female 1/4 in / 6.35 mm ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-F-Type 5 and 206-F-Type 5 non-modulating float valves are based on the 106-PG or 206-PG main valve. It is ideal for allowing normal forward flow to fill water reservoirs to a desired high level and where the pilot and valve of the reservoirs are easily ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PG series control valve is designed to suit a large variety of applications such as pressure, flow or level control. This hydraulically operated valve introduces or releases water from the control chamber above the diaphragm to effectively maintain accurate water control. Refer to Main Valve Options and Pilots & Accessories to customize the valve to suit specific ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PR-R and 206-PR-R pressure reducing and pressure sustaining valves are based on the 106-PG or 206-PG main valve with the addition of the sustaining pilot 81-RP and pressure reducing pilot PR-160. Provided the upstream pressure setting is satisfied, the 81-RP pilot is kept open, permitting the valve to be controlled by the 160 pilot. The 160 pilot senses downstream pressure and under ...
-
Manufactured by Mueller Water Productsbased in CANADA
The SCP-TP Controller is a simplified process controller designed to complement the Dual Solenoid Control Valve. It offers quick and easy configuration for any single process application as well as on/off applications. The SCP-TP is also equipped to be configured to control the Singer 420DC Motor. Range of application is dependent on the process variable (feedback) transmitter used, which ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 26 flow stabilizer is a self-cleaning, opening speed control. It is used in conjunction with a fixed restriction orifice that is usually threaded into port 3. The 26 stabilizer allows free flow down to the bonnet (port 1) and restricts flow up from port 1. The 26 stabilizer is used as the standard flow stabilizer (opening speed control) on model 106-PR or 206-PR pressure ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure sustaining valves are based on the model 106-PG or 206-PG main valve. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS and 206-RPS pressure relief valves are based on the 106-PG and 206-PG main valves. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to relieve damaging overpressure and closes smoothly at an adjustable speed, when the pressure returns below ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-RPS-8700 pressure relief valve, which is UL / FM labelled and listed, automatically relieves excess pressure in the fire protection system to discharge. The RPS series valves will also automatically modulate to relieve excess pump capacity during pump start up and shut down, allowing the pump to operate without causing surges. These relief valves are based on the 106-PG or A106-PG main ...
-
Manufactured by Mueller Water Productsbased in CANADA
The 106-PFC / 206 PFC Pressure Modulation Valve is a pressure reducing valve with a special (Patented) pilot that increases downstream pressure as flow increases. The PFC valve alters and controls pressure with flow to create virtually constant pressure at the critical pressure point in a system. It will also automatically adjust for distribution friction losses. The PFC valve will deliver ...
-
Manufactured by Mueller Water Productsbased in CANADA
Singer Model 106 EDV-A-10507A Electric Solenoid control valve is based on the Singer Model 106 PG-UL Deluge main valve. The solenoid pilot provides on-off position operation. The solenoid either admits inlet pressure into the main valve operating chamber from the inlet of the main valve via a high capacity relay valve or releases pressure from the relay valve and therefore the main valve ...
-
Manufactured by Mueller Water Productsbased in CANADA
The Model A106-DL-Air is a compact sewage relief valve that is suitable for high pressures up to 200 psi / 13.8 bar, responds very quickly and retains all the features and benefits of the Model A106-DL Spring–Hydraulic version. It is an attractive solution to what may be otherwise a difficult application due to higher pressures or space height limitations. The Model A106-DL-Air-ET retains ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you