Flow Control Equipment For Monitoring And Testing Available In Georgia
-
ShowcaseManufactured by Skim-pakbased in USA
skim-pak series 600 is designed to remove floating contaminants including oils, foams and particulates from limited access and smaller skimming ...
-
ShowcaseManufactured by EMC Hycal Limitedbased in UNITED KINGDOM
Probe longevity: 100 measurements typical, 20 hours continuous immersion. Response time: 5 minutes to stable result, response time less than 2 seconds. Footprint: approx. 1/2 volume, approx. 1/2 weight. Operating expense: 3x lower running cost, reduced degassing ...
-
ShowcaseManufactured by Randolph Austin Companybased in USA
The 500-PHO is machined from an aluminum casting and has a stainless steel plate and shaft as well as stainless sleeved roller assembly. The pump is rugged, reliable, and easy-to-use. The 500-PHO is good choice for use from the laboratory to industrial applications such as paper & pulp, printing, metering, and fluid ...
-
ShowcaseManufactured by Respirometer Systems and Applications, LLC (RSA)based in USA
When operating in the aerobic mode, oxygen – from a supply of pure oxygen – is added in small increments into each respirometer vessel in response to oxygen uptake and carbon dioxide absorption. This mode of operation maintains a constant oxygen concentration in the headspace within the reaction vessel. Oxygen transfer from the headspace to the liquid phase is accomplished by using ...
-
ShowcaseManufactured by Excalibur Water Systems Inc.based in CANADA
The Excalibur Water Systems Industrial Clean-In-Place System facilitates the cleaning and restoration of reverse osmosis membranes by purging the foulants that develop during regular equipment operation. This operation restores a degree of a membrane’s performance while eliminating the need to manually remove the membranes to clean or replace them. CIP models can manage varying degrees of ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The NitroGen series CASTORE PRO are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to 99.5%. An optional channel can provide up to 45 L/min of compressed, dry and regulated ...
-
ShowcaseManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran 2537 performs continuous long-term, unattended analysis of gaseous elemental mercury with unmatched accuracy, sensitivity, and reliability. The Tekran 2537 is easy to setup, use, and maintain and has long been known for its stable performance in rugged conditions. Our instruments have been installed at both Polar Regions, on ocean research vessels and hundreds of locations in between. ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Triplex Parallel models offer a multi-tank continuous, uninterrupted supply flow of scale-control conditioned water. Utilizing Soft-tec® resin, flex bed, recirculation pump for low flow conditions, upflow design, no regeneration, and wastewater process. Excalibur Water Systems Triplex Parallel Scale Control Systems come in various inlet/outlet sizes and flow ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
EQMS-200 online VOC monitoring instruments adopts PID (photoionization detector) for gas detection. The target gas is irradiated I bombarded by ultraviolet light produced by the ion lamp, and is ionized after absorbing enough UV energy. The concentration of the target gas can be detected by detecting the tiny current generated after the ionization of the gas. This type of VOC monitoring ...
-
PremiumManufactured by Chromatotec Groupbased in FRANCE
Designed for automatic validation of results at different concentration ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
This system combines a chemical-free Iron, Manganese, and Sulphur filter with an ozone injection ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The GAS-804DT Series Air Sampling Systems are designed for remote unattended continuous air sampling applications. The GAS-80DT4 Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The GAS-804DT Series design ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
The DF-804E-30 series high volume enzyme dust air sampling systems are designed for remote unattended continuous air sampling applications. The DF-804E-30 Series Air Samplers feature a brushless motor with electronic motor speed control that maintains a user selectable flow rate. The flowrate range attainable through the filter media is dependent upon the air porosity of the filter media. The ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-AB-25L-BL is a lightweight, small footprint, DC voltage powered air sampling system operable from (1) on-board 4500 mAh NiMH batteries, (2) line power, or (3) vehicle cigarette lighter ...
-
PremiumManufactured by LNI Swissgasbased in SWITZERLAND
The BEAM 3.1 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.1 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / Powder Handling). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.1 has been developed to meet specific requirements in term of gas, ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
Model DFHV-1DTSE digital high volume air samplers provide a durable brushless motor with the simplicity of operation and improved accuracy. This model features a motor cooling fan within the motor housing, digital flow measurement, elapsed time and accumulated volume measurement capabil-ity. It has a bright LED display and a four button keypad and automatic flow control. The brushless motor ...
-
PremiumManufactured by F&J Specialty Products, Inc.based in USA
F&J Model DF-30L-BL-AC is a lightweight, small footprint, brushless DC motor powered air sampling system operable from (1) line power or (2) an external 12VDC source such as solar ...
-
PremiumManufactured by Suzhou Jono Environmental Technology Co., Ltdbased in CHINA
Rotary air separator is one of sorting products that are developed by JONO's independent research. By this separator, material is separated into heavy fraction and light fraction. With the reasonable structure, high separation efficiency, low noise, small vibration, free- block. It is widely applied in various waste treatment, especially in packaging waste ...
-
PremiumManufactured by Excalibur Water Systems Inc.based in CANADA
Electronic demand design for maximum ...
-
PremiumManufactured by Anguil Environmental Systems, Inc.based in USA
When catalyst is added to the media chambers of an RTO it is then referred to as an RCO. The abatement device still relies on high energy recovery to minimize auxiliary energy usage. However, the VOC compounds will oxidize at lower temperatures with the use of catalyst, further lowering the need for auxiliary energy. This is a great option for catalyst friendly compounds. Multiple catalyst and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you