Flow Detection Equipment For Monitoring And Testing Available In Algeria
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectroVisc 300 is a bench-top semi-automatic kinematic temperature bath viscometer optimized for the analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant ...
-
PremiumManufactured by ENVEAbased in FRANCE
Dusty is a filter monitor that works on a triboelectric ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
Robust, reliable, and cost-effective temperature monitoring of pipeline assets is now available from MOBILTEX, engineered for performance in even the most extreme and remote locations. The MOBILTEX TS1 configurations enable field technicians to install remote, battery-powered GPS-enabled temperature sensing capabilities that are compatible with our CorTalk RMU1 platforms. Measurement data is ...
-
PremiumManufactured by ENVEAbased in FRANCE
FlowJam T is a sensor that has been specially developed for monitoring the flow of solids that are conveyed through thin pipelines. The sensor can be used for tubes made of electrically non-conductive material, such as plastic or rubber, with outside diameters between 4 and 25 mm. The sensor is mounted around the tube for ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flow and detection of material blockage. The system operates with no contact in a process in which the material movement is detected by using the Doppler effect. The FlowJam is a process-secure device, since the microwave technology used can penetrate material coating on the sensor and reliably detect the material movement behind it. If ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
The GTRI data logger has up to 8 data files for monitoring a range of analogue and digital signals and benefits from the latest advances in cellular ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features an integral flow conditioner for installations with limited straight run of piping as well as analog or pulse outputs to totalize gas consumption. Ideal for skid mounted packages where straight run and space are limited. Typical applications include fuel gas flow measurement, compressor leak detection and compressor fuel gas consumption. Wetted parts are 300 series stainless ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Available with various diameters and lengths. For sensor installation for reliable flow detection in part-filled and full pressurised ...
-
PremiumManufactured by ENVEAbased in FRANCE
Material flow monitoring with Flow/No Flow information plus additional “Detection of blockage” or “Material flow interruption” function ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93C insertion and inline type flow switch is specifically designed for use in sanitary and hygienic process applications. Its 20Ra finish, available with either mechanical polish or electro-polish finishing, is suitable for applications in food, beverage, pharmaceutical and other clean processes. FCI is the only thermal manufacturer providing temperature compensation to ensure set point ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The OPSIS O2000 oxygen monitor is designed to monitor oxygen concentrations in industrial applications such as continuous emissions monitoring (CEM) and process control. It has been given a ruggedized design (IP65 protection) allowing it to operate under tough conditions in aggressive flue gas ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
The PFM1 data logger has up to 8 data files for monitoring a range of analogue and digital signals and benefits from the latest advances in cellular communication. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes Medium measurement range for levels up to ca. 1m. Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes. POA flow velocity sensors are suitable for continuous measurement of slight to ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Suitable for applications featuring high velocities and low levels. OFR Radar - contactless flow measurement: Suitable for applications featuring high velocities and low levels. By developing the OFR radar sensor in combination with our previous product range we are capable of providing the best possible measurement solution to detect any kinds of flow in each application. Whether for measurement ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flows with trend ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
Robust, reliable, and cost-effective temperature monitoring of pipeline assets is now available from MOBILTEX, engineered for performance in even the most extreme and remote locations. MOBILTEX introduces the CorTalk RMU3+TS1 — a complete RTD Sensor/Transmitter Package that allow operators to easily add up to 12 sensors to new or existing RMU3 ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you