Flow Detection Equipment For Monitoring And Testing Available In Serbia
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
20 nm Online & Sample Particle Monitoring. Leading-edge microelectronic processes require very clean process chemicals that are highly filtered and regulated to a particle size of 20 nm or below. With 20 nm particle sensitivity, the Chem 20 Chemical Particle Counter from Particle Measuring Systems (PMS) supports the International Roadmap for Devices and Systems (IRDS) and a large variety of ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for continuous moisture measurement in dry bulk solids, with flow detection and process temperature ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Ultrasonic sensors for flow measurement with very high accuracy in slight to heavily polluted media. For installation on channel wall or channel ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flow and detection of material blockage. The system operates with no contact in a process in which the material movement is detected by using the Doppler effect. The FlowJam is a process-secure device, since the microwave technology used can penetrate material coating on the sensor and reliably detect the material movement behind it. If ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
The HVP-4000AFC-Series high volume air samplers are housed in a clear-anodized aluminum outdoor shelter. The units incorporate a maintenance-free, two or three stage centrifugal blower powered by a brushless, variable speed, maintenance free motor. Blower selection is dependent upon individual sampling environment. The speed of the motor is controlled by a programmable logic controller (PLC) that ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
The GTRI data logger has up to 8 data files for monitoring a range of analogue and digital signals and benefits from the latest advances in cellular ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Flow Alarm Unit detection and analysis of gas flow system for gas flow applied to the use of rotameter occasions, because adopt advanced optical technology, even in the use of the rotor flowmeter is very small (1mm) also can be obtained by monitoring and alarm; can adjust the flow value convenient; When the gas flow exceeds the set threshold, the panel indicator turns green to red, and the alarm ...
-
PremiumManufactured by ENVEAbased in FRANCE
Continuous flow measurement of powder or granules in high pressure dense-phase conveying. Designed to measure solid flows during pneumatic dense phase transport. The sensor measures density and speed. ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave sensor for contactless monitoring of material flows with trend ...
-
PremiumManufactured by AMETEK Spectro Scientificbased in USA
The SpectroVisc 300 is a bench-top semi-automatic kinematic temperature bath viscometer optimized for the analysis of used and new lubricants. It conforms to the requirements in ASTM D445, D446, D7279, IP 71 and ISO 3104. It is also the ideal system for used oil analysis laboratories that need to test a wide range of lubricant ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The Leaksurveyor uses a fast response semiconductor sensor reducing the time taken for gas leak surveys on gas distribution networks. The Leaksurveyor detects flammable gas from PPM through LEL to 100 % ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Contactless flow measurement for open channels and part filled pipes. The contactless low-maintenance radar sensor provides reliable operation even at very high discharge velocities with low flow levels. Dynamic hydraulic models for various channel shapes based on varying filling levels enable accurate detection of the real flow rate. Introducing the NivuFlow 7550 we provide a transmitter for ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FLT93C insertion and inline type flow switch is specifically designed for use in sanitary and hygienic process applications. Its 20Ra finish, available with either mechanical polish or electro-polish finishing, is suitable for applications in food, beverage, pharmaceutical and other clean processes. FCI is the only thermal manufacturer providing temperature compensation to ensure set point ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features a pigtail connection and remote 4-wire control board that is ideal for small/confined vessels and difficult to access locations. Typical flow applications include lube oil monitoring, cooling water detection, air flow and/or leak detection and analyzer sample flow verification. Wetted parts are 300 series stainless steel. CPVC with 300 series stainless steel or Hastelloy C-22 sensors ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes Medium measurement range for levels up to ca. 1m. Cross correlation sensors for flow velocity and level detection in part filled and full pipes and channels. For installation in pipes. POA flow velocity sensors are suitable for continuous measurement of slight to ...
-
PremiumManufactured by Mobiltex Data Ltdbased in CANADA
The PFM1 data logger has up to 8 data files for monitoring a range of analogue and digital signals and benefits from the latest advances in cellular communication. ...
-
PremiumManufactured by NIVUS GmbHbased in GERMANY
Hybrid Flow Measurement with Surface Radar and Ultrasonic Profile Scanner. Flow measurement for open channels as well as part filled pipes. Optimum results through combination of ultrasonic cross correlation and radar ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
FCI's AS-FS Series flow switches utilize no moving parts, ultra-reliable thermal dispersion flow measurement technology to detect a flow rate above or below a predetermined set point at the sensing location. They are applied to signal low flow or high flow alarm conditions in air or liquid fluid flows throughout the aircraft. FCI offers two versions, one for air flow and one for liquid flow ...
-
PremiumManufactured by ENVEAbased in FRANCE
Microwave barrier for contactless detection of dry bulk solids in containers, pipes or chutes. Reliable fill level and limit ...
-
PremiumManufactured by OPSIS ABbased in SWEDEN
The OPSIS O2000 oxygen monitor is designed to monitor oxygen concentrations in industrial applications such as continuous emissions monitoring (CEM) and process control. It has been given a ruggedized design (IP65 protection) allowing it to operate under tough conditions in aggressive flue gas ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you