Only show results available in Virginia? Ok

Flow Monitoring Applications

  • Flow & Energy Management Solutions for vehicle and vessel

    Several Spire Metering Technology flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Vehicle and Vessel Operation.

    By Spire Metering Technology based in Marlborough, MASSACHUSETTS (USA).

  • Emission monitoring for cement plants

    Kurz Thermal Insertion Mass Flow Meter systems provide proven accuracy and reliability in the most difficult of EPA Title IV applications with the ability to survive for long periods of time without maintenance.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • AMR Systems

    Contor Group provides the customers a reliable full-package AMR technology: » the meters endorsed with radio modules » portable receivers and data concentrators » GPRS/GSM communication equipments » specific software applications. Some benefits AMR technology brings: » open communication protocol wMBUS acc. to EN 13757-4 » equipments interoperability regardless of the device manufacturer » licence-free ISM band » tamper attempts or unauthorized access detection » back-flows detection and compensation hence the meter index and reading are identical » the mechanical blockage are evidenced » compliance with the standards: EN 300 220, EN 300 328, EN 301 489

    By CONTOR GROUP S.A. based in Arad, ROMANIA.

  • Premium

    Inspection of flow measuring equipment for hydraulic inspection

    Definition of Task: Metrologic inspection of flow measuring equipment according to German self-control ordination (EKVO). Inspection of flow measurement at relevant discharge point according to German regulations.

    By NIVUS GmbH based in Eppingen, GERMANY.

  • Premium

    Open Channel flow monitoring for wastewater treatment plant

    After 16 years of service, the Long Sault WWTP replaced two older Greyline Open Channel Flow Monitors with new data logging OCF 5.0 models. This SBR treatment plant`s influent is measured with flow through two 6` Parshall Flumes.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Differential level transmitter for VFD pump control & flow measurement

    An Ontario municipality deploys Portable flowmeters to solve flow rate discrepancies between sewage pump station effluent and lagoon influent flowmeters. Faced with suspension of construction permits due to flow rate uncertainty, the Township of North Glengarry called on Greyline Instruments to help troubleshoot two permanently installed flow meters.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Area-velocity flowmeter for sewage lagoon discharge flow monitoring

    The Township of South Glengarry installs a new Greyline AVFM 5.0 Area-Velocity Flow Meter to measure continuous discharge from their municipal sewage lagoon. The sealed ultrasonic sensor is mounted in a horizontal 12` PVC pipe. The AVFM replaced a magnetic flowmeter that was unable to measure seasonal low flow rates.

    By Greyline Instruments Inc. based in Long Sault, ONTARIO (CANADA).

  • Premium

    Water Monitoring and Flow Measurement Systems for Hydrology

    In recent years acoustic flow measurement and flow metering has established itself as the standard method for measurement in many hydrological stations but is also used as the basis for various applications, for example for flood protection and flood forecasting. Ultrasonic flow meters are also used in hydro-engineering constructions. With this almost contact free technology data can be recorded continuously and it provides 24/7 monitoring. Such flow monitoring is particularly important in waterways used for shipping, transportation, irrigation, drainage and for cooling water extraction of power plants. A further important use of transit-time open channel flow meters is the transportation of water used for the supply of drinking water. Here the focus lies on detecting the flow rate of water loss at an early stage as it is sometimes difficult to detect small leakages.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Disposal and Cleaning Equipment for Waste Water Industy

    Drinking water is not the only area requiring flow monitoring. The disposal and cleaning of waste water also requires flow meters. Waste water used to be dumped directly into the soil or an open channel. As awareness has increased, most discharges are now treated to assure long term sustainability. Modern water treatment plants are highly complex systems that require the use of flow sensors to monitor flow velocity in open channels for waste water discharge. Likewise facilities for waste water collection and clarification plants need regular data on flow rate. The use of radar non contact flow measurement and ultrasonic doppler flow meters are particularly efficient. HydroVision can complete flow measurements in all of these areas.

    By HydroVision GmbH based in Kaufbeuren, GERMANY.

  • Premium

    Flow meters solutions for petrochemical sector

    Our flow meters are used throughout the oil patch, from monitoring injection at the wellhead and measuring natural gas for heaters and boilers to measuring the various process gases at the refinery or flared in the field.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flow meters for the process control & manufacturing

    Sierra`s mass flow meters and controllers are widely used in the process control and manufacturing industries. From bulk gas delivery to cleaning to purging operations, Sierra`s mass flow meters and controllers offer the simplicity and robustness demanded in these applications. Our ability to handle corrosive gases, high flow rates and multiple gases with the same unit makes Sierra`s mass flow meters and controllers a tool-makers choice.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Low flow control (down to 0.1 sccm) flow solutions

    Low flow measurement and control is a difficult application. Ultra low flow mass flow controllers can accurately control flows from 0.1 to 0.4 sccm which is ideal for measuring and controlling doping gases for pilot plants and other research houses.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Flow meters for the semiconductor processing

    From bulk gas delivery to cleaning to purging operations, Sierra`s mass flow meters and controllers offer the simplicity and robustness demanded in these applications. Our ability to handle corrosive gases, high flow rates and multiple gases with the same unit makes Sierra`s mass flow meters and controllers a tool-makers choice.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Large pipes & ducts, hot tapping, purging flow solutions

    The measurement of gas flow in large ducts or pipes offers its own set of challenges. Large ducts and pipes often have swirls or turbulence in them which makes measurement of true gas flow difficult. Sierra has developed a number of solutions to this vexing problem, including stand-alone flow conditioning elements and multiple arrays of thermal sensors. By including hot taps and purging systems, such arrays can be very flexible.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Choose high accuracy gas flowmeter for increased precision and profitability

    Sierra designs and manufactures a wide range of today’s most advanced analog and digital gas flowmeters and controllers, including a high-pressure gas flowmeter. For gas mixing and blending applications, accuracy and precision control and measurement are always a central requirement. Sierra’s precise flow meters and controls provide end-users with high performance in gas mixing and blending applications like creating artificial atmospheres, gas mixing in manufacturing, inerting and gas chromatography.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Gas analysis & monitoring system for gas generation

    The gas generators for calibration based on the use of “Method of Permeation Tubes.”. The permeation tubes are sealed capsules containing a small amount of the component that is in contact with a permeable membrane stable. The permeation through the membrane produces a vapor of the compound of the component of small quantity, very stable as a stream in time. This permeate stream by mixing with a dilution gas controlled and precise (for example nitrogen) creates a mixture in track at the desired concentration. The flow of the permeate is measured metrically through severe weight loss of the tube thus ensuring a standard high precision.

    By ETG Risorse e Tecnologia based in Montiglio, ITALY.

  • Premium

    Ultra low pressure drop MFC flow solutions

    Precision mass flow control with industry leading pressure drop of 4.5 psid (310 mBard) up to flows of 500 slpm (nlpm); Accuracy +/- 1.0% of full scale; 316 stainless steel construction; CE Approved

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Argon mass flow meters flow solutions

    Thermal mass flowmeters and controllers are ideal for Argon application where precision is key. Sierra specializes in accurate mass flow measurement and/or control of Argon gas. Popular applications range from general industrial process control, inerting and steel purification processes to name a few.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Precision liquid flow sensor measurement technology

    Accurate liquid flow sensor measurement can reduce water bills, determine leakage rates, and increase system efficiency. Solve accurate water and industrial liquid flow measurement requirements with clamp-on or insertion ultrasonic flow liquid flow meters featuring precision sensing elements or our complete line of multivariable mass vortex meters.

    By Sierra Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    Capabilities of the Adsorbent Tube Injector System (ATIS™)

    The Adsorbent Tube Injector System (ATIS) was developed at Supelco® by R&D Scientists, as a tool to assist in our comprehensive adsorbent research for thermal desorption tubes. The ATIS provides an efficient means of transferring calibration standards in either the gas or liquid phase onto the adsorbent packed tubes. The ATIS employs the technique of flash vaporization to vaporize the sample in a continuous flow of inert gas; the inert gas carries the sample to the tube. The sample pathway of the ATIS is constructed of glass and stainless steel. The calibration standard is injected by a syringe through a replaceable septum in the center of the injection glassware, which is heated. After enough time has elapsed, typically less than five minutes, the tube is removed from the ATIS and analyzed using the appropriate analytical technique for that adsorbent tube.

    By Sigma-Aldrich Co., LLC based in Bellefonte, PENNSYLVANIA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you