Flow Monitoring Applications available in Madagascar
-
Premium
Mercury monitoring for mercury flux measurement
The Tekran 2537 has been used in numerous published studies to measure the deposition or evasion of mercury from natural or contaminated surfaces (i.e. flux measurements). It is anticipated that many mercury flux measurements will be needed in the future to assess the impact of climate change on mercury cycling in the environment. There are two basic ways to do mercury flux measurements. First, the dynamic flux chamber method utilizes a custom enclosure, with controlled air flow, to measure the inlet and outlet ...
By Tekran Instruments Corporation based in Toronto, ONTARIO (CANADA).
-
Premium
Continuous emissions monitoring for real driving emissions
There are many cars that have a large impact on the environment in many places around the world. The emissions from fossil fuel cars are too high, and previous test methods have not given the full picture. Tests in a laboratory has, so far, been made indoors, in laboratories, and they do not match the reality, as they do not take into account the real driving conditions. Therefore, we have developed an accurate and reliable monitoring system that can measure the emissions in real life conditions. Based on our core ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Return Sludge Flow Measurement solutions for Wastewater Treatment Plant - Sludge Treatment
Application: Pipe with 0.7 m diameter, made of stainless steel. Full filled. Point of installation in telescopic ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Non-contact flow velocity measurement for the energy industry
By Sommer Messtechnik based in Koblach, AUSTRIA.
-
Premium
AER-200 respirometer system for anaerobic applications sector
The CHALLENGE AER-200 Respirometer System consists of one or more biological reaction vessels, gas flow measuring cells, and a computer. The gas measuring base contains eight flow ceHs and associated interconnecting circuitry. As gas flows through each cell under the influence of a slight pressure caused by gas production in the reaction vessel, bubbles of a fixed volume are formed in the lower section of the cell. These bubbles in turn pass through a detection section where a counter is activated. Finally, the ...
By Challenge Technology based in Springdale, ARKANSAS (USA).
-
Premium
Surface water and water conservancy monitoring solution
Surface water and water conservancy monitoring is an important foundation work for reasonable utilization and protection of the nation water and soil resources, is a foundation of science management and protection of water ecology, water resources, water safety. The purpose of water quality monitoring is timely, accurate and comprehensive reflection of water environment quality present situation and developing trend, providing scientific basis for water environment monitoring, management, planning, pollution ...
By Hangzhou Chunlai Technology CO., Ltd. based in Hangzhou, CHINA.
-
Premium
Wastewater Treatment Plant - Discharge Area solutions for Partial Discharge Section Flow Measurement
Application: Pipe DN 500, made of stainless steel. Full filled. Service water tapping and feeding ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Environmental data monitoring solutions for Research
Aerosol research is the study of the physical characteristics and behavior of an aerosol in a gas flow. ...
By Ecomesure based in Saclay, FRANCE.
-
Premium
Flowing Waters - Irrigation & Drainage Systems solutions for Flow Measurement in Service Reservoir
Application: Special profile, approx. 2.5 x 2.0 m (h x w). Part filled. Channel made of natural stone and concrete. High flow ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Energy Savings Solutions for Oxygen Industry
Measure and monitor your oxygen flow, pressure, temperature, and dew point, with VPInstruments oxygen sensors. Get insight into your oxygen consumption and optimize your system, monitor your consumption and allocate flow over your distribution network. VPInstruments’ sensors for oxygen are highly reliable and easy-to-use. We help manufacturers of oxygen generators, technical gas suppliers, oxygen infrastructure (piping, installation) companies, and end customers to respond to current increased ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Channel Networks - Pump Stations and Lifting Facilities Solutions for flow rate monitoring on pumps sector
Application: Cast iron pipe DN 200. Full filled. Old existing line (condition unknown), installed pipe system cannot be ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Air pollution, emission and process monitoring systems for agriculture
Working with the industry’s leading manufacturers enables ENVEA to understand specific environmental and process monitoring requirements and the ability to provide an extensive range of ambient, emission and process monitoring systems. A choice of measurement technologies monitor and control key areas of the process including storage, handling, drying activities and dust releases to atmosphere to meet and exceed regulatory environmental obligations and help improve process efficiency. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Channel Networks - Pump Stations and Lifting Facilities for flow measurement pumps sector
Application: Pipe diameter 0.15 m, made of steel. Full pipe. Wet ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Sludge Flow Measurement in Recirculation Line solutions for Wastewater Treatment Plant - Sludge Treatment
Application: Pipe with 0.4 m diameter, made of stainless steel. Full filled. High pollution load, up to 1 % dry ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Analytical Instruments for Biogas
Instruments for anaerobic batch and continuous fermentation tests. The anaerobic batch fermentation test is a well-established test system for the determination of the biogas potential and biochemical methane potential (BMP) of organic materials, specific methanogenic activity (SMA), residual gas potential (RGP) and substrate inhibition. Several standards and guideline are available for performing batch anaerobic fermentation tests, such as VDI 4630 (2016) and ISO 11734 (1995). These laboratory-based tests ...
By BPC Instruments AB based in Lund, SWEDEN.
-
Premium
Continuous emissions monitoring solutions for special applications CEM
OPSIS is a world-leading supplier of CEMS (continuous emissions monitoring systems) for various special applications in the industrial emissions sector. The OPSIS gas monitoring systems have been tested and approved by a range of international authorities, and has proven to have the best performance and longest calibration intervals. We specialise in the design and supply of high accuracy, low maintenance, cross-duct, non-extractive CEM systems. We also provide additional products and services, including dust and ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
By ENVEA based in Poissy, FRANCE.
-
Premium
Contactless Flow Measurement solutions for Wastewater Treatment Plant - Intake Area
Application: Concrete channel, width 1.2 m. Part filled. Measurement point upstream of screen and grit trap. High sedimentation ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Nighttime Supply Flow Measurement for drinking water industry
Application: Pipe with 0.1 m diameter. Full filled. Made of stainless steel. Low water volumes of approx. 3 ...
By NIVUS GmbH based in Eppingen, GERMANY.
-
Premium
Air pollution, emission and process monitoring systems for food & pharma
High accuracy measurement and reliability in monitoring instrumentation is called for by Food and Pharmaceutical Processes. ENVEA’s unique capabilities allow the observation and control of many of the manufacturing functions found in these industries. From the measurement and control of emitted dust from dryer filter plant to the non-intrusive, solid state measurement of powder mass flow and the monitoring of process gas quality, ENVEA instrumentation provides Plant Operators with the opportunity to fine ...
By ENVEA based in Poissy, FRANCE.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you