electronic flow meter Articles

  • Controlling the Flow Capacity of a Metering Pump

    Since a metering pump is usually a positive displacement pump there are two possible ways of controlling the flow capacity. The first one is by adjusting the volume of liquid displaced per stroke of the pump and the second is by adjusting the speed of the strokes. I. Stroke Length – control the displacement volume per stroke II. Speed of Strokes per minute Stroke Length ...


    By Aquflow

  • Replacement Fill Control Valves with Electronic Flow and Metering Improve Pressure, Stop Leakage and Prevent Valve Failures

    The City of Modesto, California is situated 90 miles east of San Francisco and has approximately 200,000 residents relying on 200,000 of gallons of water a day. The City needed to upgrade three water storage tanks that hold approximately 750,000 gallons each. After years of using motor operated valves to fill water storage tanks, the city recognized that there were just too many problems. ...


    By Singer Valve Inc.

  • Development of a self-rechargeable digital water flow meter

    The objective of this paper is to present the feasibility of a self-rechargeable digital water flow meter (SRDFM) system for water pipes using the latest data processing and wireless communication technologies while causing negligible water pressure drop (head loss). The system uses a Pelton turbine generator to power the electronic circuit, which processes and transmits the signals generated by ...


    By IWA Publishing

  • How Does a Water Flow Meter Work?

    A water flow meter is a device that measures the amount of water flowing through a pipe. There are several water flow meter technologies to choose from depending on the water measurement application, maintenance requirements, and budgetary terms.  Each of these types of water flow meters has a unique principle of operation, specific application benefits, and overall ...


    By Sierra Instruments, Inc.

  • Flowmeter Portable Handhold Ultrasonic Flow Meter

    The Technologists from A.YITE Electronic(America) Laboratory, have done much efforts to design portable ultrasonic flowmeter, we would like to supply suitable measurement for the travelling engineer.  There is no moving part in the EU-109H ultrasonic instrument, which is a kind of movable and reliable static instrument. With its accuracy up to 0.8% and comparatively large dynamic ...


    By A.YITE Technology

  • Sensor design the key advantage in thermal mass flow meter performance

    Immersible thermal sensors arc finding growing acceptance in the gas flow measurement field. By using two Platinum Resistance Temperature Detectors (PRTDs) immersed in a stream of flowing gas, modern thermal flow meters can directly measure mass flow, without the need for temperature or pressure compensation. Thermal meters offer very high turndown, accu- racy and repeatability at an economical ...


    By Sierra Instruments, Inc.

  • AVFM 5.0 area-velocity flow meter monitors sewage lagoon discharge flow - Case Study

    The Township of South Glengarry in Eastern Ontario discharges continuously from their 72,000 m3 sewage lagoon. But they ran into flow measurement problems when their magnetic flowmeter was unable to detect seasonal low flow rates. Operations Manager, Shawn Killoran selected a Greyline AVFM 5.0 Area-Velocity Flow Monitor because it was simple to install in a horizontal discharge pipe from the ...


    By Greyline Instruments Inc.

  • Advances in Thermal Dispersion Mass Flow Meters - Part 2 Installation and Flow Calibration

    Abstract Part 1 of this two-part series describes the principle of operation of a new microprocessor-based thermal dispersion mass flow meter that uses four temperature sensing elements in its flow sensor and has a dry velocity sensor. Part 1 shows how this unique system provides automatic management of changes in gas selection, gas temperature, gas pressure, and outside temperature. This ...


    By Sierra Instruments, Inc.

  • Capillary Tube Thermal Mass Flow Meters & Controllers - A User`S Guide - White Paper

    Abstract Capillary tube thermal mass flow meters directly measure the mass flow rate of clean gases and gas mixtures in lower flow ranges. A capillary tube thermal mass flow controller adds an integrally mounted flow control valve to the flow body of the mass flow meter and bom monitors the mass flow rate and controls it to be equal to a set-point value selected by the user. ...


    By Sierra Instruments, Inc.

  • In-Situ Calibration - Methods & Pitfalls of Thermal Mass Flow Meter Sensor Field Validation

    Introduction Mid-to-large size facilities and campuses inevitably have hundreds of ¬ ow instruments to monitor, maintain, and repair. For a reliability engineer, ensuring that all instrumentation meets ISO 9000 or similar standards is a time-consuming responsibility. These standards mandate that precision instrumentation needs to be checked (validated) or recalibrated as often as once a ...


    By Sierra Instruments, Inc.

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • Sizing and Selecting the Proper Metering Pump: Part 1 of 2

    A typical agriculture or process application can consume large amounts of chemicals during daily operations. While the volumes may be large, though, they must also be very precise, with exact amounts delivered according to strict injection schedules. The pressures—from very high to very low—that the chemicals are injected at must also be governed precisely. This demand for ...


    By Modern Pumping Today

  • Accurate Flow Monitoring for Billing Applications - Passaic Valley Sewerage Commissioners, Newark, NJ - Case Study

    The accQmin velocity profiling flow meter from Teledyne Isco, Inc. is key to accurate measurement of flow for billing purposes where primary devices such as flumes can be overwhelmed at times of increased flow. Newark, NJ The Passaic Valley Sewerage Commission (PVSC) operates one of the country’s largest treatment plants for the wastewaters of northern New Jersey, working to ...


    By Teledyne ISCO

  • Area-Velocity Flowmeter Installations in Denmark - Case Study

    Area-Velocity Flow Meters are designed to monitor flow rates in partially filled pipes and open channels without flumes or weirs. A sealed ultrasonic sensor is mounted on the bottom of the pipe or channel and connected to electronics through a watertight cable. The sensor measures both level and velocity and when calibrated with the pipe diameter or channel dimensions, the Greyline AVFM ...


    By Greyline Instruments Inc.

  • Contact-free indirect measurement

    The non-contact mode of measurement is very interesting for hygienic applications in the food-, pharmaceutical- and cosmetics industry, as well as for industrial applications with thick, adhesive and solid containing liquids. Experience has shown that conventional volumetric flow meters quickly come to their limit, while other measuring procedures are often very complex and/or are not suitable ...


    By Lutz Pumpen GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you