flow measurement equipment Articles

  • Applications guide to mass flow measurement in the pharmaceutical and biotech industries

    Pharmaceutical and biorech companies can fine-tune costs, quality, and emissions if they are equipped with more effective measurement sys- tems. Sierra mass flow meters and controllers provide precise measure- ment and control designed for process industries. They can make any plant more cost-effective in the following ways: Controlling Gas Flow To Fermenters The flow of gases to ...


    By Sierra Instruments, Inc.

  • IAEA safeguards equipment

    The International Atomic Energy Agency (IAEA) operates a large diversity of equipment to verify nuclear materials, contributing to the confirmation of the states' compliance with their respective nonproliferation obligations. The variety of physical and chemical properties of nuclear materials, as well as their storage environment, requires an arsenal of instruments. Additionally, the IAEA ...


    By Inderscience Publishers

  • A Dutch first in the polder - Water Board Zuiderzeeland measures flow rates to achieve sustainability

    The Dutch province of Flevoland lies metres below sea-level. That’s why rain and seepage need to be removed from the polder, some 6 metres up. And that’s the reason Flevoland is drained continuously by seven huge pumping stations. The quantity of energy involved in this is as great as the energy consumption of 4,000 households. Water Board Zuiderzeeland has launched the ‘Energy ...


    By Eijkelkamp Soil & Water

  • Discharge Measurements In Low Flow Conditions With ADC p t echnology – First Experiences In Nepal

    Low flows prevail during about nine months of the year in Himalayan rivers as a result of the influence of the monsoon climate. They account for a large portion of the annual water balance and accurate information about these flows is therefore critical for water resources planning, development, management and hydropower design. Issues that occur with the neighbouring country India are often ...


    By Teledyne RD Instruments

  • Equipment purchasing and leasing

    PURCHASING (or leasing) equipment for use in manufacturing compost (and/or soil products) can be one of the riskiest decisions compost managers must make. The obvious risks of equipment acquisition (i.e. paying too much, higher than expected operating costs, not having the cash flow to cover payments, etc.) are augmented by risks such as machines not able to keep up with the increased materials ...


    By BioCycle Magazine

  • Non-contacting Ultrasonic Pumping Station Flow Measurement Saves Money for Dwr Cymru Welsh Water

    Dwr Cymru Welsh Water has benefitted from the unique 'Pumped Volume' feature built into Pulsar's Quantum 2 Pump Station Controller; identifying a flow problem within a pumping station network without the need for expensive Magflow meters. Once the issue was resolved, pumped volume through one of the stations was reduced by 88% , ...

  • Wastewater engineers go with the flow

    The efficiency of maintenance work has been improved by water treatment engineers employing Intellisonde monitors in their final effluent. Designed primarily to measure water quality, the Intellisondes also measure flow, and this reading is being used to detect the accumulation of debris that necessitates a maintenance visit. Wastewater treatment efficiency is often measured by the analysis of ...


    By Intellitect Water Ltd

  • Fearless flow back - treating completion fluids & acid flow backs

    An oil company completed a well and CETCO Oilfield Services was there to treat the flow back fluids. During the flow back, it was necessary for the oil company to continue normal drilling operations. Deck space on the structure was at a premium for the oil company, who simultaneously continued drilling while flow back fluids were being treated. CETCO Oilfield Services’ proven technology and ...


    By CETCO Energy Services

  • Optimising existing equipment with Bioconservación products

    As part of its technical support service offered to clients on an ongoing basis, Bioconservacion conducted an efficiency study at the express request of one of its customers. The study explored solutions to improve efficiency in eliminating odours origintating from biological reactors through the use of horizontal deodorisation systems. The objective was to guarantee the ...


    By Bioconservacion SA

  • FLOW-TRONIC S.A./N.V. - case study

    Customer: FLOW-TRONIC S.A./N.V. Sector: Water and wastewater industry Country: Belgium Technology Supplier: Microtronics Engineering GmbH Year of Cooperation: 2010 Website: www.flow-tronic.com The Customer FLOW-TRONIC is internationally recognized as the leading distributor and manufacturer of innovative and accurate liquids flow measuring ...

  • Grounding equipment can prevent costly repairs

    Every remote environmental monitoring station should include a plan for an Earth Ground. All sensors, loggers and telemetry devices should be bonded, or connected, to the Earth Ground in order to protect instrument circuitry from damage due to changes in electric potential. Electric potential is defined as the difference in electrical energy between two points and is typically measured in volts ...

  • Reorganizing Rental Stock for Better Flow

    Hydreka is proud to be able to claim the largest stock of rental products for water cycle measurement of any company in France.  This lets us guarantee our customers that if they need rental equipment, we will have it in stock and ready to ship to them anywhere in the world. But, maintaining such a large inventory also poses its challenges.  We have recently changed the layout of our ...


    By Hydreka SA - A Halma Company

  • Flow Tip Video: Learn Why Ease-of-Use is Critical for Flow Meter Selection

    Many times scientists and researchers spend more time setting up equipment and instrumentation for their experiments than conducting actual experiments to gather important data. This holds true for flow meters and controllers to measure and control gases to experiments. Some flow meters are very cumbersome with no display, can only measure one ...


    By Sierra Instruments, Inc.

  • Pulsar`s Quantum 3 Brings Integrated Flow Monitoring to Pumping Station Management

    Northumbrian Water has installed Pulsar Process Measurement's Quantum 3 Pumping Station Controller which features, apart from a suite of advanced pump control functions based on Pulsar's non-contacting ultrasonic level measurement, the ability to link in up to four Flow Pulse non-invasive flow monitors. Northumbrian Water has used the system to increase station efficiency by identifying ...

  • Non-contacting solution for Plugged off flow meters in the oil patch - Case Study

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • Surface flows from images: ten days of observations from the Tiber River gauge-cam station

    Fully remote surface flow measurements are crucial for flow monitoring during floods and in difficult-to-access areas. Recently, optics-based surface flow monitoring has been enabled through a permanent gauge-cam station on the Tiber River, Rome, Italy. Therein, a system of lasers and an internet protocol camera equipped with two optical modules afford video acquisitions of the river surface ...


    By IWA Publishing

  • Portland Cement Manufacturer Upgrades Technology,Improves Operation and Reduces Costs

    One of the largest Cement factories in America was interested in reducing frequent visual emissions inspections mandated by new Portland Cement (MACT) rules in effect since June 2002. A second issue was the need to measure solids flow in the finish mill operation to determine the rejects flow rate. During a recent upgrade to the finish mill circuit, the rejects flow, which is traditionally ...


    By Auburn Systems, LLC

  • New Expansion for Pulsar in China

    British non-contacting measurement and control specialists Pulsar Process Measurement have strengthened the team in China with the appointment of Eric Shi as National Sales Manager. He joins the growing Pulsar team who support customers and distributors throughout Asia, supported by the Regional Head Office in Kuala Lumpur, Malaysia. Eric joins Pulsar after ten years experience working ...

  • Area-Velocity Flowmeter Installations in Denmark - Case Study

    Area-Velocity Flow Meters are designed to monitor flow rates in partially filled pipes and open channels without flumes or weirs. A sealed ultrasonic sensor is mounted on the bottom of the pipe or channel and connected to electronics through a watertight cable. The sensor measures both level and velocity and when calibrated with the pipe diameter or channel dimensions, the Greyline AVFM ...


    By Greyline Instruments Inc.

  • TDS: `The Done Sale`

    Many Americans have at least some concern that their tap water is problematic, yet they don’t know where to begin. The TDS, or total dissolved solids, meter can be the first step in determining if there’s a problem. The term TDS has long been well-known in the water treatment industry, yet still has not penetrated the mass consumer market. However, by hearing your brief explanation, ...


    By HM Digital, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you