ultrasonic flow meter Articles

  • The Function of an Ultrasonic Flow Meter

    Running a water management operation requires taking a wide range of measurements. In addition to measuring the flow in your system, many systems must measure the water level of their channel, and one of the best tools for accomplishing this goal is an ultrasonic flow meter. ...


    By TRACOM Inc.

  • How an Ultrasonic Flow Meter Works

    An ultrasonic flow meter utilizes ultrasound to measure the velocity of a fluid and is used in a variety of fluid applications. Ultrasonic flowmeters are ideal for water and other liquids. Clamp-on ultrasonic flow meters achieve high accuracy at low and high flows, save time with no pipe cutting or process shutdown, and are not affected by external noise. Here’s how ultrasonic flow ...


    By Sierra Instruments, Inc.

  • Making Ultrasonic Liquid Flow Meter Installation Easier

    Ultrasonic transit-time flow meter technology is becoming one of the most adopted technologies for accurate liquid and energy/BTU measurement. Although a major benefit of the technology is that it is non-invasive and can be clamped to the outside of the pipe, an inherent challenge with ultrasonic clamp on liquid flow meters is finding the best location to measure the liquid. This means ...


    By Sierra Instruments, Inc.

  • Flowmeter Portable Handhold Ultrasonic Flow Meter

    The Technologists from A.YITE Electronic(America) Laboratory, have done much efforts to design portable ultrasonic flowmeter, we would like to supply suitable measurement for the travelling engineer.  There is no moving part in the EU-109H ultrasonic instrument, which is a kind of movable and reliable static instrument. With its accuracy up to 0.8% and comparatively large dynamic ...


    By A.YITE Technology

  • Introducing Our New InnovaSonic 207i Ultrasonic Liquid Flow Meter

    For Liquid Flow Metering, Optimized for Thermal Energy/ BTU Sierra is proud to announce the new InnovaSonic 207i ultrasonic liquid flow meter with thermal energy/BTU capability.  Designed, built and calibrated by Sierra in Monterey, California for non-intrusive ...


    By Sierra Instruments, Inc.

  • Attenuation of an ultrasonic beam by suspended particles and range of acoustic flow meters in sewer networks

    Ultrasonic flow meters are commonly used in wastewater management. Under certain circumstances, a reduction in the flow meter range may occur and cause significant error in the flow rate measurement. Attenuation due to suspended particles is one of the phenomena capable of reducing the flow meter range. The present paper examines attenuation resulting from re-suspended pond sediment over a wide ...


    By IWA Publishing

  • How Does a Water Flow Meter Work?

    A water flow meter works by measuring the amount of water that passes though the flow meter. The most common mechanical types work by measuring the speed of flowing water that causes a turbine or piston to rotate. The volumetric flow rate of the water is proportional to the rotational speed. Other water flow meters include ultrasonic, magnetic and vortex flow meters. The best type of water flow ...


    By Sierra Instruments, Inc.

  • VIDEO: Mass Flow Meters for Power Plant Applications

    Generating electricity in a natural gas power plant is a complex process due to the multiple steps involved with the different types of fluids being used and optimized. Dr. John Olin, Founder of Sierra Instruments, explains how thermal mass flow meters, vortex flow meters, and ultrasonic flow meters can improve the flow energy management in power plant ...


    By Sierra Instruments, Inc.

  • Permanent Multipath Clamp-On Transit Time Flow Meter

    For many years now, ultrasonic flow measurements with "wetted" sensors have been a well established procedure to measure discharge in big pipes in the field of hydro power plants. A lot of research studies show that very precise measuring results can be achieved, under the provision of correct application and consideration of diverse ancillary conditions. Depending on the flow conditions and the ...


    By HydroVision GmbH

  • How Does a Water Flow Meter Work?

    A water flow meter is a device that measures the amount of water flowing through a pipe. There are several water flow meter technologies to choose from depending on the water measurement application, maintenance requirements, and budgetary terms.  Each of these types of water flow meters has a unique principle of operation, specific application benefits, and overall ...


    By Sierra Instruments, Inc.

  • How Does a Water Flow Meter Work?

    A flow meter works by measuring the amount of a gas, liquid or steam that passes through or around the flow meter sensors. While flow meter sensors work in many different ways, the end goal is the same: Deliver the most accurate and repeatable flow measurements for the specific application, whether for general research, process control or semiconductor processing. Flow meters measure either mass ...


    By Sierra Instruments, Inc.

  • Core technology part 2: transit-time ultrasonic

    Since the introduction of ultrasonic transit-time flow meters, manufacturers have continually improved their measurement and signal processing capabilities. Recent advances in digital correlation transit-time technology allow customers to use this convenient, non-intrusive installation to address some of the more challenging flow applications. Ultrasonic flow meters are divided into two ...


    By Sierra Instruments, Inc.

  • Non-contacting Ultrasonic Pumping Station Flow Measurement Saves Money for Dwr Cymru Welsh Water

    Dwr Cymru Welsh Water has benefitted from the unique 'Pumped Volume' feature built into Pulsar's Quantum 2 Pump Station Controller; identifying a flow problem within a pumping station network without the need for expensive Magflow meters. Once the issue was resolved, pumped volume through one of the stations was reduced by 88% , ...

  • Non-Contacting Solution for Plugged Off Flow Meters in The Oil Patch

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • AVFM 5.0 area-velocity flow meter monitors sewage lagoon discharge flow - Case Study

    The Township of South Glengarry in Eastern Ontario discharges continuously from their 72,000 m3 sewage lagoon. But they ran into flow measurement problems when their magnetic flowmeter was unable to detect seasonal low flow rates. Operations Manager, Shawn Killoran selected a Greyline AVFM 5.0 Area-Velocity Flow Monitor because it was simple to install in a horizontal discharge pipe from the ...


    By Greyline Instruments Inc.

  • DFM 5.0 doppler flow meter for frac sand slurry flow monitoring - Case Study

    CanFrac Sands Ltd. of Lloydmister Saskatchewan (Canada) needed a flowmeter that could accurately measure sand slurry flow without being damaged by this highly abrasive product. They selected the Greyline DFM 5.0 Doppler Flow Meter with a clamp-on ultrasonic sensor mounted on the outside of a pipe. CanFrac produce “fracturing sand” used by the oil and gas industry. This special type of ...


    By Greyline Instruments Inc.

  • Gas Mass Flow Metering - Innovations Promise More Economical Choices- White Paper

    Introduction As the drive towards energy independence in the United States continues at full speed, oil and gas companies are turning to hydraulic fracturing to increase production. Increasingly stringent state and national regulations for flare gas in particular now require the installation of mass flow measurement instruments to measure waste and excess gases burned off as a result ...


    By Sierra Instruments, Inc.

  • Non-contacting solution for Plugged off flow meters in the oil patch - Case Study

    For years Petrobakken Energy Ltd. used inline turbine flow meters to track the flow rate of oil recycled to treaters. But with a high concentration of wax and sand in the oil, the turbine meters were quickly plugging off. The line had to be shut down at least once a day and the turbine flowmeters disassembled for cleaning. This was troublesome and expensive. Petrobakken knew there had to be a ...


    By Greyline Instruments Inc.

  • Now Measure All Flow Energy in Your Facility - One Solution - Three Metering Technologies

    Facilities managers at large facilities often have the challenging task of managing all the flow energy in their facility with the mandate from upper management to save money on energy costs. To accomplish this goal, it’s critical to get accurate flow measurement data of the flow energy in your facility such as: natural gas, compressed air, steam, chilled and hot water. ...


    By Sierra Instruments, Inc.

  • Open Channel Flow - The use of Level sensors for open channel flow measurement

    Open Channel Flow - The use of Level sensors for open channel flow measurement Level sensors from SolidAT are implemented in Open Channel Flow applications. In these types of applications, the level sensor is installed above a special water flow structure and accurately measures level of flowing water or wastewater. The sensor then calculates flow through the structure ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you