Gas Meter (Flow Monitoring) Equipment
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features 4 to 20mA scalable for flow or temperature, 0 to 10 Vdc scalable for flow or temperature and pulse outputs. Independent signals can also be configured for alarms and/or totalizing. Typical applications include compressed air, low pressure aeration and HVAC applications, nitrogen/carbon dioxide blanketing, and natural gas fuel ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Models ST51 and ST51A are a compact, low cost solution for accurate, repeatable flow measurement of biogas, digester gas, landfill gas, methane and natural gas as well as air, compressed air or nitrogen. This insertion-style flow meter has no moving parts and is available in probe lengths for installation into pipe diameters from ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features an integral flow conditioner for installations with limited straight run of piping as well as analog or pulse outputs to totalize gas consumption. Ideal for skid mounted packages where straight run and space are limited. Typical applications include fuel gas flow measurement, compressor leak detection and compressor fuel gas ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features the same output signals offered in the gas meter (listed above) with an adjustable insertion length using a removable compression fitting. Ideal for air applications, particularly HVAC duct installations. Standard input power is 9 to 36 Vdc. Wetted parts are 300 series stainless steel with a nylon or stainless steel compression ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a compact, economical solution to natural gas flow metering. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. It was the first thermal flow meter, and is currently the only one, to comply with SIL 2. Additionally, for ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The Siemens DMT is an intrinsically safe and self-contained sensor which can be used to measure the flow, temperature and pressure of fluids flowing in a Sample Conditioning System (SCS) connected to a Siemens Maxum or MicroSAM process Gas Chromatograph (GC). The DMT provides flow rate, temperature and pressure in a single unit. Using a ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The Science of Process Gas Flow Metering Advanced, Future Ready! ST100A is high performance thermal dispersion technology gas flow meter that combines the most feature- and function- rich electronics, and FCI innovations such as Adaptive Sensing Technology (AST), with the industry's most advanced flow sensors to achieve a truly ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
Features an integrated sensor and circuit board in separate packaging to be used as a portable assembly powered by a 5 to 9 Vdc lithium battery. 12 Vdc battery powered units are also available. Wetted parts are 300 series stainless ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
Effortless operation, maximum convenience. BPC Core is a self-contained, high precision gas volume and flow meter array designed for monitoring of up to 9 or 18 parallel gas streams. Its distinctive integrated data acquisition and processing systems enable it to operate autonomously, eliminating the need for a computer or any other external ...
-
PremiumManufactured by BPC Instruments ABbased in SWEDEN
BPC® Go is the next-generation gas volume and flow meter containing an in-built computer to simplify and secure low gas flow measurements. It automatically measures both wet and dry gases at laboratory scale with high precision and accuracy without the need for recalibration. Built to the highest standards of Scandinavian quality, it is ...
-
Manufactured by HENAN SUNTRONT TECH CO. LTDbased in CHINA
Contactless IC Card Gas Meter is suitable for measuring the flow of natural gas, coal gas and liquid gas. One household fixed one meter and consumer uses gas by IC card. No need of house call fee-charge and avoid ...
-
based in IRELAND
Gas Flow Meter with pulse output, flowrate up to 0.16 to 25m3/hr. MID conformity approved by PTB. Approved to EN 1359 by German DVGW. Cyclic volume 6 liters T-version 5.6 liters. Maximum operating pressure 0.5 bar. High accuracy and long-term stability. Powder coated pale grey to RAL 7035. Temperature range: standard: -10 °C to +40 ...
-
Manufactured by Elster Instromet N.V.based in BELGIUM
Turbine gas meter DN50 –150, worldwide recognized as standard in high pressure flow metering. The TRZ2 is serially equipped with permanent lubrication bearings as well with the mechanical S1 Index. From ANSI class 300 upwards all meters are equipped with manual oil pump as standard. ...
-
Manufactured by iCenta Controls Ltdbased in UNITED KINGDOM
The principal of the Rotor Gas Meter is well known. It is a positive displacement type of meter, passing pre-determined volumes of gas by means of two counter-rotating rotors or impellers. The bearings are placed outside of the timing gears. There is no bending, twisting or torque ...
-
by Alderley plcbased in UNITED KINGDOM
Whether you need a single stream skid or a complex, fully integrated multi-stream gas metering solution with control panel and analyzer house, the knowledge and experience you will find at Alderley will deliver what you need. We have experience in all types of gas metering and associated instrumentation and are proud to have ...
-
Manufactured by Elster Instromet N.V.based in BELGIUM
RABO combines tried-and-tested product features of previous rotary gas meters from Elster-Instromet and is a convincing product because it offers a large range of future-oriented features. The device is suitable for measuring gases of the first, second and third families pursuant to EN 437:2009 and for measuring a range of technical ...
-
Manufactured by Energoflow AGbased in SWITZERLAND
Gas Meter HORN is designed to measure the volume of natural gas or degasified hydrocarbon gas for households and public utilities adjusting the measured gas volume, and displaying the amount of consumed gas on the meter indicator with the ability to transfer information to a ...
-
Distributed by Shanghai Besters Ltdbased in CHINA
The instrument used to measure a small volume gases, particularly generated during long wet, corrosive gases, generated by microbial majority. Automatic measuring chamber flows through a siphon by volume, each siphon once more displayed on a volume, siphon chamber 45 to 55ml, each unit correction alone. No moving parts, does not require regular maintenance, which improves the reliability of the ...
-
Manufactured by Hubei Cubic-Ruiyi Instrument Co., Ltd.based in CHINA
BF-2000 Residential Gas Meter is a pre-paid type gas meter embedded with Cubic’s ultrasonic gas module which have self-owned intellectual property. It is suitable to be used in community biogas projects that supplying biogas to families directly for cooking, and some other small scale biogas ...
-
Manufactured by Bell Flow Systems Ltd.based in UNITED KINGDOM
1' Domestic Diaphragm Gas Meter. Qmax 6 m3/h. Fireproof to EN1359. Transco Standard Domestic Meter. OFGEM Approved. UK Construction / Proven Design. BS746 Connections. 3/4' BSP Adaptor option available. Pulse Output option available. Suitable for metering of: Natural Gas, Town Gas, LPG in Most ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you