Sludge Flow (Flow Monitoring) Equipment
-
Manufactured by Deeter Electronics Ltdbased in UNITED KINGDOM
The RPS-100 is the first of the RPS series and has a proven track record of reliability. Since its introduction in 1979, the RPS-100 has proven itself in versatility and ease of operation. The remote transducer allows for mounting of the sensor head in cramped spaces while the controller is out of the way. The ranging and proximity modes provide the versatility of simple detection, or actual ...
-
Manufactured by Deeter Electronics Ltdbased in UNITED KINGDOM
Manufactured by Migatron Corp and distributed by Deeter Electronics, these Intrinsically Safe ultrasonic sensor have ANZEx, ATEX, cUL, & IECEx approvals for use in Hazardous (Classified) ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
A Bright Belt Filter Press rental might be the answer, because we offer rentals with buyout options. Secondly, we tell you the purchase price upfront on the available equipment and a portion of the rental cost goes toward that purchase price. However, if the equipment doesn’t work out for you, it can be returned any time after the 4 week minimum rental period. You can also rent the ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Bright Technologies offers complete Belt Filter Press Dewatering systems that are trailer mounted. Easily mobilized to project sites, these trailer mounted systems feature a plug and play concept, resulting in quick and easy setup. We design and manufacture the trailer mounted equipment package for high throughput, low maintenance, superior cake solids and ease of ...
-
Manufactured by Magnetrol, a brand of AMETEKbased in USA
Polaris is an electromagnetic flow meter that is capable of measuring liquids with a conductivity as low as 5 µS/cm in closed pipes. It is an accurate and repeatable flow meter that is suitable for a variety of water based and sludge flow applications. The Polaris transmitter is backlit and rotatable with the capability of ...
-
PremiumManufactured by Sebright Products, Inc.based in USA
Bright Technologies offers complete Belt Filter Press dewatering systems that are skid or trailer mounted. We design and manufacture the skid equipment package for high throughput, low maintenance, superior cake solids and ease of ...
-
Manufactured by Cerlic Controls ABbased in SWEDEN
Our Classic series includes sensors for: Suspended Solids, Dissolved Oxygen, pH, ORP, Pressure, Level, Flow, Automatic Sludge Blanket Meter, Central units BB1 and BB2, Water sampler, Refrigerator, Sensors and Central units in our Multi Series are not compatible with the Classic ...
-
Manufactured by CiDRA Corporate Services Inc.based in USA
With the VF-50 flow measurement system, CiDRA presents a unique solution for the variety of flow applications in the municipal water and wastewater market. Whether it be measuring influent water flow and sludge lines, or monitoring RAS and WAS lines, the VF-50 flow meter uses CiDRA’s proven sonar technology ...
-
Manufactured by Shanghai Centrifuge Institute Co., Ltd (SCI)based in CHINA
The sludge feed system consists of sludge cutter, sludge feed pump, electromagnetic flow meter, electric valve, manual valve, pipes, concentration meter in the quenching and tempering pool, ultrasonic level meter, turbidimeter at the outlet of separation medium, and other ...
-
Manufactured by Pulsar Measurementbased in UNITED KINGDOM
Designed for challenging flow applications in industrial environments. Easily deployed whenever you need it. Whether you need flow measurement when you didn't have it before, or you need to prove that your existing system is performing properly, the PTFM 6.1 from Pulsar is here to help by providing accurate, non-invasive flow ...
-
Distributed by Descon Automation Control System LLCbased in UNITED ARAB EMIRATES
In the electromagnetic measuring principle, the flowing medium is the moving conductor. The voltage induced is proportional to the flow velocity and is supplied to the amplifier by means of two measuring electrodes. The flow volume is calculated by means of the pipe cross-sectional area. The DC magnetic field is created through a switched ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include the same corrugated coalescing plate assembly as the PSR Models and also include a highly efficient polypropylene media final polishing coalescer that is designed to remove free oil droplets down to 20 micron in size and produce a free oil and grease effluent quality of 10 ppm or less. Rectangular design is for above grade to below grade installations in a ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include an enhanced arrangement of corrugated coalescing plates that enable the separator to produce a free oil and grease effluent quality of 15 ppm or less. Cylindrical design is for direct burial or can also be saddle mounted for above grade ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include the same corrugated coalescing plate assembly as the PS Models and also include a highly efficient polypropylene media final polishing coalescer that is designed to remove free oil droplets down to 20 micron in size and produce a free oil and grease effluent quality of 10 ppm or less. Cylindrical design is for direct burial or can also be saddle mounted for ...
-
Manufactured by PS International Incorporated (PSI)based in USA
These oil-water separators include an enhanced arrangement of corrugated coalescing plates that enable the separator to produce a free oil and grease effluent quality of 15 ppm or less. Rectangular design is for above grade to below grade installations in a concrete ...
-
Manufactured by Wyatt Engineeringbased in USA
The Wyatt Lo-Loss® PMT is a differential-producing flow tube that maintains its accuracy over a wide range of flow rates. The hydraulic shape of the PMT incurs a lower permanent pressure loss than any other differential producing flow device. The PMT can be provided with either flanged or plain end connections. Wyatt offers full body ...
-
Manufactured by Centrisys/CNPbased in USA
Complete skid mounted dewatering systems are designed with all the components required for sludge dewatering and thickening in one single package with flow rates ranging from 0 to 1,200 gpm (0 - 272 m3/h). Systems are designed around the proven Centrisys high performance centrifuge or sludge thickener. Ancillary components, which ...
-
Manufactured by OR-TEC, Incorporatedbased in USA
This rugged and easily operated system can be set-up for thickening or dewatering. If you're looking for an economical and simple solution to your thickening concerns, you'll find an answer in the OR-TEC Thickener System. Designed with ease of operation, low maintenance, cost effectiveness and efficiency in mind, the OR-TEC Thickener is a proven leader in the municipal, industrial and ...
-
Manufactured by Sino-Instbased in CHINA
Magnetic Water Flow Meter provide highly accurate flow measurement for a wide variety of conductive fluid applications. Magnetic Water Flow Meter is a volumetric flow meter that measures liquids or liquid slurries that have a minimum conductivity of 5 µS/cm. Based on Faraday’s law of electromagnetic induction. ...
-
Manufactured by Jiangsu Kintep Environmental Protection Co., Ltd.based in CHINA
Screw Press Sludge Dewatering Machine, it's clog-free and can reduce the sedimentation tank and sludge thickening tank, saving the cost of sewage plant construction. Using screw and the moving rings to clean itself as clog-free structure, and controlled by the PLC automatically, it's a new technology that can replace the traditional filter ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you