Flow Monitoring services for Monitoring and Testing

Now all flow monitoring networks can receive the field service expertise of ADS Environmental Services. With over 30 years experience as the leader in wastewater flow monitoring and Underground Intelligence®, ADS has commissioned permanent flow monitoring networks across America and Australia. Whether a small network of five monitors or a ...

By ADS Environmental Services based in Huntsville, ALABAMA (USA). from Flow Monitoring Services Service line

In most countries, the requirements for discharging to surface water are established in local legislation. Many countries apply fixed values. However, there are also countries that link the discharge requirements to the volume and flow rate of the water receiving the discharge. In almost all cases, a biological (anaerobic and/or aerobic) treatment ...

By Marel Water Treatment B.V. based in Lichtenvoorde, NETHERLANDS. from Solutions Service line

The new ‘Flowsure’ water based calibration rigs have the ability to test and calibrate volumetric and mass flow meters with flows from just a few litres per hour right through to 60 litres per second using pipe sections up to 8” (200 mm).

By Flowquip Limited based in Sowerby Bridge, UNITED KINGDOM. from Flow Meter Services Service line

OnSite is proud to announce the launch of the OS8000 real time flow monitoring system. The ATEX certified meter has the ability to upload data to a web site at regular intervals (anything from a month to 5 minutes). The key benefit of the monitor is that it utilises low-cost redundant sensors (two pressure transducers, two velocity transducers, ...

By OnSite Resources Limited based in Walsall, UNITED KINGDOM. from Flow Monitoring Service line

Flow velocity profiles. Business case. Bathymetry and clearance measurements. Site optimization. Energy production estimates.

By New Energy Corporation Inc. (NECI) based in Calgary, ALBERTA (CANADA).

Spot flow gauging involves the measurement of the discharge, at a given location, at a point in time. The techniques required for spot flow gauging vary depending upon the size and nature of the watercourse. Our experienced staff will select the best technique and equipment for your site to ensure high quality data is collected, every time.

By Hydro-Logic Services based in Berkshire, UNITED KINGDOM. from Field Hydrometry Services Service line

Miahona has excellent professional and technical capabilities in the field on Non-Revenue Water. We specialize in Performance based NRW reduction projects and provide services such as:

By Miahona based in Riyadh, SAUDI ARABIA. from Other Services Service line

The Avanti Company’s Agricultural, Industrial and Municipal Customers all require periodic testing of flow meters at their Wells, in their Plants and with their Residential and Commercial customers. State, Regional and local Authorities also require periodic testing to ensure the accuracy of withdraws, processes and reporting.

By The Avanti Company, Inc based in Avon Park, FLORIDA (USA).

The need to quantify the flow of liquids has been recognized since the beginning of civilization. One of the earliest and most complete records of an attempt to measure water flow volume is that of Sextus Julius Frontinus, who was the Water Commissioner of Rome in 52 A.D. He attempted to determine the quantity of water delivered to each user in ...

By Gasvoda & Associates, Inc. (GAI) based in Calumet City, ILLINOIS (USA).

The Service department provides construction assistance, equipment start-up, periodic flowmeter calibration service, scheduled maintenance, and on-site and off-site warranty service in all of the territory in which we place equipment.

By Instrument & Supply, Inc. based in Hot Springs, ARKANSAS (USA).

Ammonia Injection Balancing, CO Catalyst Efficiency, Temperature Profiling, Flow Rate Profiling, Multiple Locations Simultaneously

By Montrose Environmental Group, Inc. based in Irvine, CALIFORNIA (USA). from Air Quality Services Service line

The Importance of Accurate and Reliable Flow Data. When ADS Environmental Services conducts flow monitoring, SSES, or any other type of field services, the data generated goes through numerous quality control checks and is presented in a format that both explains the information and summarizes our recommended plan of action. All data generated is ...

By ADS Environmental Services based in Huntsville, ALABAMA (USA). from Flow Monitoring Services Service line

Once you have purchased one of our clamp-on flowmeters, it would be preferable that every member of the engineering team knew how to use it. Training members of staff can be time consuming and is reliant on the company having a knowledgeable person available to conduct the training.

By Katronic Technologies Ltd. based in Coventry, UNITED KINGDOM.

Cambridge Scientific Instruments offers a range of services to help keep your existing CSI products performing to their very best. Whether that's a recalibration of a flowmeter, an annual service of a GC, or the repair of a damaged instrument, our highly trained staff will be able to provide a timely and cost effective service.

By Ellutia based in Ely, UNITED KINGDOM.

Characterising fluid movement within the well can be the key to understanding and optimising well performance; Silixa’s intelligent Distributed Acoustic (iDAS) and Distributed Temperature Sensors (ULTIMA DTS) offer a means to efficiently gather production or injection profiles along the entire wellbore with minimal or no intervention.

By Silixa Ltd based in Elstree, UNITED KINGDOM. from Oil & Gas Service line

Our experience means that we can advise you on the most suitable metering technology available for different applications giving you confidence in flow meter selection.

By TUV NEL Ltd based in Glasgow, UNITED KINGDOM. from Multiphase & Wet Gas Service line

EnSo provide a range of electromagnetic flow meters to comply with increasing Environment Agency daily flow recording requirements. (MCERTS). Inline electromagnetic flow meters are ideal for a range of liquid flow measurement applications where high accuracy and ease of use are the key benefits of this technology. Insertion electromagnetic flow ...

By EnSo International Ltd based in Selborne, UNITED KINGDOM.

Our engineers perform detailed surveys of flow measurement devices to determine whether they are functioning correctly and to their best accuracy. We carry out adjustments and recalibrations, as necessary, to optimise the performance of flowmeters. We also offer service contracts on flowmeter installations and we can install temporary flow ...

By Flowcheck Ltd. based in South Wirral, UNITED KINGDOM.

Increasingly stringent standards for trace levels of contaminants such as chromium, arsenic, nitrates and TPC in combination with a surge in demand for groundwater resources have led to a need for more efficient and precise well characterization. Under exclusive license to BESST Inc. from the U.S. Geological Survey, the DyeTracer system allows ...

By Best Environmental Subsurface Sampling Technologies, Inc. (BESST) based in San Rafael, CALIFORNIA (USA).

ATAP Infrastructure Management Ltd. (ATAP) provides flow metering services beneficial to municipal and industrial clients. Our technicians can measure raw sewage flow, combined effluent flow, and municipal storm water runoff. Flow surveys, combined sewer overflow (CSO) monitoring, plant flow studies, and wastewater treatment studies can be ...

By ATAP Infrastructure Management Ltd. based in Saskatoon, SASKATCHEWAN (CANADA).