Flow Velocity Monitoring Services For Monitoring And Testing Available In Ivory Coast
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Cleanroom certification & qualification, flow visualization, and process validation. This service is only offered in Switzerland and Austria. With many years of experience and well-trained technicians, Particle Measuring Systems (Switzerland/Austria) is your perfect partner for cleanroom services such as cleanroom certification, cleanroom qualification, flow visualization and thermal ...
-
based in CANADA
A schematic of the DDT Process is shown below. The process begins after the completion of “steaming out” of the residue feedstock in the assigned heater. Pigg launchers are then installed on both the inlet and outlet pipes of the assigned fired heater. These launchers provide the connection points for the pressurized waterlines and permit the loading and unloading of the appropriate ...
-
Manufactured by GM Flow Measurement Services Ltdbased in UNITED KINGDOM
GM Flow Measurement Services have decades of experience in gas measurement. Building on our oil and gas sector experience, we recently pivoted into Hydrogen and CO2 as we all strive to reduce carbon emissions and develop non-polluting energy ...
-
Manufactured by Höntzsch GmbH & Co. KGbased in GERMANY
In the scope of flow velocity measuring of gases in ranges from 0.1 m/s to 70 m/s, we set standards in measurement uncertainties. A calibration service consisting of receiving inspection, maintenance and adjustment, including DAkkS calibration (formerly DKD calibration) can now be carried out in just one process and in a calibration facility traceable to national standards ...
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
Bottom flow velocity measurements are occasionally required for acceptance and as proof of performance of the mixers. The correct execution of such measurements in complex, three-dimensional flows requires expert knowledge of fluid mechanics as well as experience when it comes to preparation, execution and assessment. We exclusively use ultrasound Doppler measurement devices for the measurement ...
-
based in USA
Experienced and qualified Certified Industrial Hygiene (CIH) and Industrial Hygiene (IH) consultants that are well versed in proactively recognizing, evaluating and controlling potential hazards within an industrial environment. ...
-
based in USA
Numerical modeling relies on relevant, correct, and accurate data to describe the behavior of soil, rock, and construction materials. To this end, Itasca regularly works with trusted, accredited university and private laboratories. Itasca can validate test protocols, review test results, and specify materials properties. In addition, Itasca engineers can supervise the sampling, collection, and ...
-
by SGSbased in SWITZERLAND
SGS uses groundwater modeling techniques to help protect groundwater by simulating its drainage and flow and anticipating risks of propagation of contamination. Call our accredited hydrogeological experts today to find out ...
-
based in GERMANY
With more than 15,000 DAkkS-accredited anemometer calibrations annually, the WindGuard Wind Tunnel Centre is the first choice for many manufacturers and developers worldwide. Our four Calibration Wind Tunnels are accredited and officially recognised by the NMI (National Metrology Institute), which regularly performs comparative measurements here. At our Wind Tunnel Centre, one finds the German ...
-
based in SPAIN
Spatial Intelligence and Point Cloud: TECNALIA promotes LiDAR and 3D sending technology, and the result of these processes and technologies, which is the point cloud. TECNALIA understands that this technology offers the best perspective of the environment (dimensions, shapes, volumes, speeds, trajectories…), and a detailed understanding of that environment leads to multiple work flows of ...
-
Manufactured by Aqua Drill Internationalbased in USA
Complete engineering services and packages developed by experienced engineers using the most advanced technology insure the most well executed cleaning program possible. Aqua Drill International employs a team of highly educated and dedicated Professional Engineers with years of domestic and international experience. Our proven implementation record shows our capabilities in developing new ...
-
Manufactured by BHR Group Limitedbased in UNITED KINGDOM
BHR Group has a large and dedicated test facility to study the flow behaviour through engineering structures. Plant design is optimised and performance verified to international standards by our team of specialist fluid engineers. With 65 years experience in modelling of structures, systems and components, our multi-disciplined engineers and researchers are able to provide an integrated ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
You will be issued an RMA (Return to Manufacturer Authorisation) number which will be needed for the completion of the RMA document which can be downloaded below. If you are returning goods from outside the EU, please also note the Return Of Goods instructions document which provides important and useful information to speed customs clearance into the UK / ...
-
Manufactured by S-Keeper 7 CEMS - a brand by Tecnova HT srlbased in ITALY
The S-Keeper 7™ is in strict compliance with the MARPOL Directive requirements but its Mission is even more important. Since 1974 TECNOVA Group has delivered thousands of devices, such as meters, oil in water analysers, viscometers, shaft monitoring etc., to improve the management of cruising ships, cargoes, chemical tankers, RO-ROs,etc. With the benefit of our extensive experience S-Keeper ...
-
Manufactured by ADS Environmental Servicesbased in USA
Master meters are tested, using a Pitometer rodmeter, to validate production statistics and calibration data. The master meter tests are conducted by inserting a Pitometer rodmeter in series with the meter and comparing the rate of flow indicated by the Pitometer rodmeter with the rate of flow indicated by the master ...
-
Manufactured by Dantec Dynamicsbased in DENMARK
Dantec Dynamics now offers optional calibration of the fringe spacing for 60 mm FiberFlow and FlowLite probes with a calibration uncertainty of 0.067% (coverage factor 2). Calibrated probes come with a label showing the calibrated fringe spacing, and a calibration certificate including the calibration data, a description of the calibration rig, an uncertainty analysis of the calibration ...
-
based in CANADA
Designing new hydraulic structures and modifying existing structures to ensure passage for fish and other aquatic organisms is an important tool for restoring ecological conditions and recovering endangered species. NHC's fisheries engineering solutions also include designing facilities to exclude fish from entrapment in water intake facilities, support for hatchery facilities, and instream ...
-
Manufactured by XOCEANbased in IRELAND
Bathymetric surveys provide detailed information about our subsea world. With a 100kg payload capacity and large electrical power reserves, XOCEAN offers a robust platform for multibeam echo sounder surveys. Operating 24/7, we can deliver bathymetric data ...
-
Manufactured by SiREMbased in CANADA
Reduced metals are used to abiotically enhance remediation for a wide variety of contaminants in groundwater and soil/sediment. SiREM performs both microcosm and column studies for reduced metals applications using granular, nano-scale and micro-scale zero valent iron (ZVI), zero-valent magnesium, zinc and reduced iron minerals (e.g., siderite). Reduced metals microcosm studies are constructed ...
-
Manufactured by Silixa Ltdbased in UNITED KINGDOM
Characterising fluid movement within the well can be the key to understanding and optimising well performance; Silixa’s intelligent Distributed Acoustic (iDAS) and Distributed Temperature Sensors (ULTIMA DTS) offer a means to efficiently gather production or injection profiles along the entire wellbore with minimal or no ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you