Flow Velocity Monitoring Services For Monitoring And Testing Near Massachusetts
-
Manufactured by INVENT Umwelt- und Verfahrenstechnik AGbased in GERMANY
Bottom flow velocity measurements are occasionally required for acceptance and as proof of performance of the mixers. The correct execution of such measurements in complex, three-dimensional flows requires expert knowledge of fluid mechanics as well as experience when it comes to preparation, execution and assessment. We exclusively use ultrasound Doppler measurement devices for the measurement ...
-
by SGSbased in SWITZERLAND
SGS uses groundwater modeling techniques to help protect groundwater by simulating its drainage and flow and anticipating risks of propagation of contamination. Call our accredited hydrogeological experts today to find out ...
-
based in USA
Nova's experienced engineers and technical staff can perform a comprehensive list of nondestructive and specialty facilities testin6 that can be of tremendous value to building owners. Property managers and contractors. These services include nondestructive materials testing and roofing/building envelope testing. These diagnostic tools can be used to evaluate the current condition. The cause and ...
-
Manufactured by Kanomax USA, Inc.based in USA
Kanomax has developed unique airflow measurement instruments based on technology derived from our years of accumulated fluid mechanics research such as: multi-point air velocity measurement systems, and precision airflow measurement in high-temperature environments. These innovative tools are perfect for the sophisticated measurement needs of the automotive, aerospace, consumer electronics, ...
-
Manufactured by Valeport Ltd.based in UNITED KINGDOM
You will be issued an RMA (Return to Manufacturer Authorisation) number which will be needed for the completion of the RMA document which can be downloaded below. If you are returning goods from outside the EU, please also note the Return Of Goods instructions document which provides important and useful information to speed customs clearance into the UK / ...
-
based in CANADA
Franz Environmental Inc. (FRANZ) provides turnkey services for environmental site assessments across Canada. We support clients in their efforts to better understand the risk of potential environmental liability associated with property transactions, and to provide technical guidance on remediation options when environmental impacts are discovered. Our procedures follow provincial-specific ...
-
based in USA
Directed Technologies Drilling has designed unique development tools for well rehabilitation or regular well maintenance that can help you rehabilitate and maintain efficient ...
-
based in GERMANY
With more than 15,000 DAkkS-accredited anemometer calibrations annually, the WindGuard Wind Tunnel Centre is the first choice for many manufacturers and developers worldwide. Our four Calibration Wind Tunnels are accredited and officially recognised by the NMI (National Metrology Institute), which regularly performs comparative measurements here. At our Wind Tunnel Centre, one finds the German ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Cleanroom certification & qualification, flow visualization, and process validation. This service is only offered in Switzerland and Austria. With many years of experience and well-trained technicians, Particle Measuring Systems (Switzerland/Austria) is your perfect partner for cleanroom services such as cleanroom certification, cleanroom qualification, flow visualization and thermal ...
-
Manufactured by SiREMbased in CANADA
Reduced metals are used to abiotically enhance remediation for a wide variety of contaminants in groundwater and soil/sediment. SiREM performs both microcosm and column studies for reduced metals applications using granular, nano-scale and micro-scale zero valent iron (ZVI), zero-valent magnesium, zinc and reduced iron minerals (e.g., siderite). Reduced metals microcosm studies are constructed ...
-
based in USA
Numerical modeling relies on relevant, correct, and accurate data to describe the behavior of soil, rock, and construction materials. To this end, Itasca regularly works with trusted, accredited university and private laboratories. Itasca can validate test protocols, review test results, and specify materials properties. In addition, Itasca engineers can supervise the sampling, collection, and ...
-
Manufactured by Heumann Environmental Companybased in USA
In addition to HEC's equipment solutions, we provide key stand alone diagnostic and design services to benefit ...
-
Manufactured by ADS Environmental Servicesbased in USA
Flow monitoring is used to determine the hydraulic conditions of sanitary sewers under various conditions. Typically conducted over a 60-day period, temporary flow monitoring can be used to determine inflow/infiltration levels, calibrate dynamic hydraulic models, measure in-situ line capacity and detect bottlenecks within the system. Longer duration permanent flow monitoring networks can act as ...
-
Manufactured by ADS Environmental Servicesbased in USA
ADS Environmental Services utilizes specialized equipment to measure pressured flow in water distribution systems. Flow measurements can be used to calculate flow capacity in water distribution systems, accurately measuring actual flow velocities and velocity ...
-
Manufactured by ADS Environmental Servicesbased in USA
Master meters are tested, using a Pitometer rodmeter, to validate production statistics and calibration data. The master meter tests are conducted by inserting a Pitometer rodmeter in series with the meter and comparing the rate of flow indicated by the Pitometer rodmeter with the rate of flow indicated by the master ...
-
based in USA
Hydrogeological characterization studies cover a broad range of applications and services. In the broadest sense these studies are designed to characterize either the earth matrix which is controlling groundwater flow or the quality of the ground ...
-
based in USA
Geophysics is an important forensic tool in a wide range of infrastructure related studies. The non-destructive tests (NDT) enable the engineer or geophysicist to inspect the interior of a structure without the need to physically dig, drill or otherwise destroy part of the structure. GeoView has performed thousands of infrastructure related studies for both governmental agencies and private ...
-
based in USA
Experienced and qualified Certified Industrial Hygiene (CIH) and Industrial Hygiene (IH) consultants that are well versed in proactively recognizing, evaluating and controlling potential hazards within an industrial environment. ...
-
Manufactured by Aqua Drill Internationalbased in USA
Complete engineering services and packages developed by experienced engineers using the most advanced technology insure the most well executed cleaning program possible. Aqua Drill International employs a team of highly educated and dedicated Professional Engineers with years of domestic and international experience. Our proven implementation record shows our capabilities in developing new ...
-
Manufactured by Applied Technologies, Inc. (ATI)based in USA
Do you have a special application that requires a wind velocity measurement, but the off-the-shelf ultrasonic anemometers don't physically fit your application? Call the Applied Technologies, Inc. factory, we have no problem adapting and tailoring our ultrasonic technology to your ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you