Flow Velocity Monitoring Software For Monitoring And Testing Available In St. Vincent & The Grenadines
-
Premiumbased in CANADA
AUSTAL View is a graphical user interface for the official German Federal Environmental Agency air dispersion model, AUSTAL. The AUSTAL model was developed according to Germany's air pollution control regulation TALuft (Technical Instructions on Air Quality). AUSTAL is a Lagrangian particle tracking air dispersion model that contains its own diagnostic wind field model (TALdia). The model takes ...
-
PremiumManufactured by Particle Measuring Systems (PMS)based in USA
Your Definitive, Modular and Turn-key Solution for Cleanroom Environmental Contamination Monitoring. Monitor your viable and non-viable particles according to the most recent regulatory requirements. Count, report, document and manage your environmental monitoring data meeting 21 CFR Part 11 data integrity requirements. ...
-
by HiViewbased in NETHERLANDS
Climate change has a strong impact on glaciers and as a result glaciers are globally receding, thinning and their flow velocities are decreasing. Fieldwork on glaciers is challenging and expensive and current field methods are still notably uncertain. Satellite remote sensing is commonly used for monitoring glacier changes, but the resolution of most satellite based sensors is to coarse to ...
-
based in USA
AFT Arrow is a fluid dynamic simulation tool used to calculate pressure drop and flow distribution in gas piping and ducting systems. Accurately simulate individual components and their interaction including effects of heat transfer, real gases and choked flow. Tightly integrate equipment characteristics, analysis and output with your system’s schematic representation. Utilize a wide array ...
-
based in USA
AFT Impulse is a powerful dynamic simulation and analysis software used to calculate pressure surge transients in liquid piping systems caused by waterhammer. Easily model a wide range of system components and surge devices. Understand the transient response of your system, knowing how valves, pumps and other components will dynamically interact with each other. Evaluate the effect of pressure ...
-
based in USA
MixIT is an enterprise wide deployable mixing analysis tool designed to facilitate comprehensive analysis of stirred reactor performance using lab & plant data, empirical correlations and advanced CFD models. It has an easy-to-user interface that allows quick data input with dynamic graphical feedback. Using MixIT users can create a database of their reactors across scales (lab/pilot/plant) ...
-
based in IRELAND
Automatically track fluid phase-state, performs flash calculations, liquid holdup calculations and develops flow regime maps for each pipe segment. Includes eight two-phase correlation methodologies. Highly accurate results developed using a “marching” solution ...
-
Manufactured by TENEVIAbased in FRANCE
FlowSnap is TENEVIA’s software for carrying out series of surface stream gauging measurements through image ...
-
by INT, Inc.based in USA
INTViewer is a platform and application that allows you to view your seismic data, check for errors, confirm geospatial integrity, perform light processing, and analyze your dataset. INTViewer is specifically designed to quickly access large datasets—prestack, stack, and 2D—from a laptop in the field to a desktop or remotely via the cloud. As a platform, INTViewer makes it easy to ...
-
based in INDIA
SEWERSOFT03 can be used for the design of Sewerage System. This software is developed on the basis of standard references. It provides a Graphical User Interface (Windows) based front end and therefore it is extremely user friendly. The design details are stored in the database format at the back end. This helps in saving the details of the designs for future reference. The software designs the ...
-
based in IRELAND
Accurate for both low and high velocity gas flow systems. Solves the conservation equations and an equation of state ensuring an accurate solution. Auto-detection of choked flow ...
-
based in USA
AFT Fathom is a fluid dynamic simulation software for engineers, used to calculate pressure drop and pipe flow distribution in liquid and low-velocity gas piping and ducting systems. Accurately simulate individual system components and interaction, Tightly integrates equipment characteristics, analysis and output with your system’s schematic representation, Provides a wide ...
-
based in CZECH REPUBLIC
TOPT is a software module for parametric optimization based on simulation results. TOPT works best inside the simulation environment TCAE. TCAE consists of modules TCAD, TMESH, TCFD, TFEA, TOPT, and ...
-
based in CANADA
The integration of various multiphysics solvers and advanced features into a single software package enables Irazu to be used for a wide range of engineering applications, including but not limited to excavations, slope stability, tunnelling, dynamic analysis, mining, and reservoir geomechanics. Irazu comes with extensive tutorial, theory, and verification manuals. ...
-
Manufactured by General Acoustics e.K.based in GERMANY
Flow charts showing velocity, vorticity (turbulence) and divergence (quality). Hydrodynamic information on every point of time and location. Hydrodynamic ADCP data evaluation software. 'The elaborated scientific algorithm uses the stream function-vorticity-formulation of the two-dimensional Euler equation, which is solved on the nodal points of a numerical computational grid'. The scientific core ...
-
based in ITALY
The most advanced algorithm for surface displacement detection, SqueeSAR is the latest InSAR technique developed by TRE ALTAMIRA for the detection of millimetre surface displacements, improving our previous PSInSAR ...
-
based in INDIA
WDSOFT03 can be used for the design of Water distribution system. This software is developed on the basis of standard references. It provides a Graphical User Interface (Windows) based front end and therefore it is extremely user friendly. The design details are stored in the database format at the back end. This helps in saving the details of the designs for future reference. The software ...
-
based in NETHERLANDS
Fast, user-friendly, non-invasive coronary physiology powered by AI deep learning. ...
-
Manufactured by Fluenta Solutions Limitedbased in UNITED KINGDOM
The UFM Manager is Fluenta's proprietary software, which has been designed to make everyday management of your ultrasonic flare meter easier. The easy-to-use and intuitive graphical interface ensures that learning the system is quick and ...
-
by CFturbo GmbHbased in GERMANY
What is CFturbo? CFturbo is an interactive and user-friendly turbomachinery design software. With CFturbo, you can create completely new geometries as well as modify existing designs. Reverse engineering is supported. CFturbo guides the user step-by-step through the complete design process of a turbomachine. A first draft can be generated automatically, and in the subsequent design process the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you