Showing results for: flue gas monitoring Articles
-
Process flue gas monitoring for combustion optimization - Case Study
Customer: Any industry having a stake in improved combustion technologies Material measured: Combustion flue gases Installation: At the boiler outlet Function: Reliable and accurate monitoring of O2 and CO for combustion control optimization Application Combustion has a number of outputs such as the ash and the emission to the atmosphere of flue gas. Before the flue gas cleaning system, ...
By ENVEA
-
Fenton degradation of Cartap hydrochloride: identification of the main intermediates and the degradation pathway
The advanced oxidation of Cartap hydrochloride (Cartap) promoted by the Fenton system in an aqueous medium was investigated. Based on total organic carbon, chemical oxygen demand and high-performance liquid chromatography, the oxidation of Cartap is quite efficient by the Fenton system. Its long chain is easily destroyed, but the reaction does not proceed to complete mineralization. Ion ...
-
Popular analysers are portable and rentable
The MCERTS approved HORIBA PG-250 has been one of the most popular instruments in Ashtead Technology’s fleet of rental equipment for a number of years. Jay Neermul, the company’s Environmental Product Manager says “This is because it is able to analyse CO, NO/NOx, SO2 and CO2 using standard reference methods in a portable instrument that can be easily and safely transported ...
-
Fenton degradation of Cartap hydrochloride: identification of the main intermediates and the degradation pathway
The advanced oxidation of Cartap hydrochloride (Cartap) promoted by the Fenton system in an aqueous medium was investigated. Based on total organic carbon, chemical oxygen demand and high-performance liquid chromatography, the oxidation of Cartap is quite efficient by the Fenton system. Its long chain is easily destroyed, but the reaction does not proceed to complete mineralization. Ion ...
-
Customer Stories:FPI CEMS-2000 Continuous Emission Monitoring System Supports Flue Gas Monitoring for Industrial Enterprises
FPI CEMS provides an application gas analysis solution integrated with a particulate monitoring subsystem, TPF processing subsystem, gaseous (pollutant) monitoring subsystem, and data acquisition and processing subsystem, covering all the indicators and parameters to meet different customers' needs. Such systems are extensively installed in industrial boilers, indicators and other mission ...
-
Crazy sulphur dioxide needs gentle sulphur dioxide sensor to appease
Background- The most important corrosive gas in the atmosphere is SO2, which accelerates the corrosion process of most metals. My country is the largest coal producer and consumer in the world. SO2 pollution is very serious. In some areas, the SO2 content in the atmosphere exceeds that of the environment. 60% of capacity. Therefore, for SO2 monitoring we will use accurate and sensitive ...
-
Customer Stories: FPI Provide Pollution Monitoring Service for Power & Steel Plants in India
With the development of Industrial manufacturing, more and more environmental damage problems began to appear. Over the past decade, carbon dioxide emissions from industrial activities have increased by 25%, while global temperatures have risen by 0.8°C.In addition, air pollution from industrial processes has caused respiratory diseases and other health problems in humans and animals. The ...
-
Wet scrubbers monitor flue gas emissions in a combustion system
Wet scrubbers are considered to be air treatment devices to take away gaseous particulate pollutants (NOx, SOx or other gases produced by combustion systems) that negatively affect the environment. According to air pollution control measures, it is required to take away these particulates in order to protect the receptors from the serious impacts of these gases on the health of humans and ...
-
Gas Concentration Monitoring in the Industry
There are often rules and regulations dictating what and how to monitor when it comes to emissions to the ambient air. By example, the European Union has established the Industrial Emissions Directive (the IED, 2010/75/EU) with conclusions on best available techniques (BATCs) for different types of industries.These documents serve as guidance and in some cases minimum requirements for national ...
By OPSIS AB
-
AMETEK THERMOX Introduces the WDG-V Combustion Analyzer
Abstract AMETEK THERMOX Introduces the 5th Generation THERMOX Combustion Gas Analyzer in a CONTROL Magazine Exclusive. WDG analyzers are based on a zirconium oxide cell that provides a reliable and cost-effective solution for measuring excess oxygen in flue gas as well as CO and methane levels. Information from the Gas Analyzer allows operators to obtain the highest fuel efficiency, while ...
-
Measuring Opacity and Particulate Matter
Among the most obvious of hazardous air pollutants (HAPs), as it is readily visible by eye, is particulate matter (PM) - particles of smoke and dust. Small particlesbelow 2.5 μm in diameter are a special concern as they pose the greatest risk to health. Some PM emissions can be categorised as fugitive and are generally subject to work practice controls. However, the main sources of emissions ...
-
Skaerbaek, Denmark Project - Case Study
DONG Energy invests in a new biomass powered plant in Skaerbaek, Denmark. The plant is 2 x 140 MW. Radscan delivers flue gas condensation, environmental measuring systems and condensate purification with membrane technology. Installation Starting summer 2015 and taking over ...
-
Specifications and quality measures for CEMS calibration curves
ABSTRACT Calibration requires special procedures to establish the analysis function of the entire measuring equipment. With the help of a reference method, comparative measurements are carried out and their results are correlated with the simultaneous device output signal. The analysis function to be set up must be representative of the total relationship between the measuring device and the ...
-
Case Series: FPI Offers Its Solution for Vietnam Environment Monitoring
Poor air quality threatens the health of millions of people worldwide, but more so for individuals living in Vietnam. Air pollution causes nearly 60,000 deaths yearly in Vietnam. According to Statista, the country's population-weighted concentration of particle pollution (PM) stood at 20.4 micrograms per cubic meter in 2019. That's close to the recommended maximum concentration of 25 micrograms ...
-
Gasmet provided Tammervoima waste-to-energy plant a flue gas measurement system that has proven its worth - Case Study
Tammervoima waste-to-energy plant in Tampere, Finland incinerates approximately 165 thousand tons of municipal waste every year, providing electricity and district heat for the people of Tampere region. Gasmet delivered the plant a flue gas measurement system, which is used to monitor that the emissions stay within the set boundaries. The system has worked so well that there have been zero ...
-
PH Sensor Types And Maintenance
overviewEveryone knows that the choice of water quality sensors is very important. In water measurement, the ph sensor is one of the important tools. However, there are many kinds of ph sensors on the market, which makes many consumers wonder “how do I choose the right ph sensor?”, “Where do I start?”. This requires us to know the ph sensor information before using or buying, and then choose the ...
-
Innovative Infrared Thermal Imaging has optimised furnace operation at Encirc - Case Study
Introduction Encirc, a leading glass manufacturer, has implemented AMETEK Land’s real-time, in-furnace thermal imaging Near Infrared Borescope (NIR-B) to optimise furnace operations and introduce reductions in emissions at its Elton plant in Cheshire, UK. About Encirc Encirc is unique. From the manufacturing of container glass, to modern filling facilities, to warehousing and logistics, ...
-
Why Measure Flue Gas Velocity?
Many industrial processes release flue gases to the atmosphere. Under European Directives the majority of those are classed as emission sources and therefore require continuous emission monitoring. European standards for monitoring pollutants and flow for CEMS (Continuous Emission Monitoring Systems) are already in place and other countries usually follow them to some extent. The CODEL VCEM5100 ...
-
Global solution: Gas and particulate analysis in Cement industry
Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...
By ENVEA
-
Total solution: Gas and particulate analysis in Cement industry
Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...
By ENVEA
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you