Flue Gas Monitoring Equipment For Monitoring And Testing Available In Georgia (US)
-
ShowcaseManufactured by Testo, Inc.based in USA
Measurement accuracy, configurable measurement display, parallel measurement options, intuitive operation, sturdy housing, connection option to the testo Smart App: Our flue gas analyzer testo 310 II offers everything that heating fitters and technicians need for practical work on heating ...
-
ShowcaseManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The UV-GAS-500 model gas analyzer is based on DOAS technology,able to measure the concentration of gases including SO2,NO2,NO,NH3,CL2,O3,H2S etc,It has features of high measurement accuracy ,outstandingreliablility,fast response time and wide applicable ...
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The MT100 Series is an insertion type, multipoint thermal flow meter specifically designed for large diameter pipes, such as stacks, industrial chimneys, and flues, and large rectangular ducts, such as air feed intakes and HVAC. These large pipe/duct applications are difficult for ordinary flow meters because of distorted flow profiles and lack of straight-run that can lead to inaccurate and ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
High-temperature hygronom is also called high-temperature moisture meter or high-temperature dew-point meter, which is used to measure the humidity of flue gas emitted by pollution source. According to measured humidity, it converts wet gas concentration into dry gas concentration, widely applied in industrial online humidity ...
-
PremiumManufactured by Testo, Inc.based in USA
When house owners notify the network operator or fitter that they can clearly smell gas in the house, a highly explosive gas concentration may already be present (4–17%). The fitter has to use a gas detector to check sections of gas pipes for leak tightness to locate possible ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The flexibility of the IMR 5000 CEMS allows it to offer an endless set of possibilities to measure different parameters like CO, CO2, NO, NO2, CH4, HC, NH3, Cl2, HCl, H2, O3, SO2, H2S, O2, Velocity, Draft, Dust, Temperature and other parameters on ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
According to the status and characteristics of construction sites and production industry generated pollution, applying more sophisticated network cloud platform technology, CEMS manufacturers like ZETIAN has developed the digital EQMS-3000 remote continuous air monitoring system. The continuous air monitoring system can measure the air concentration of particulate matter (including: TSP, PM10, ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The LGT-580 Portable Laser Gas Analyzer is composed of two parts: analyzer host and portable sampling pipe. The core module of the host employs high-precision Tunable Diode Laser Absorption Spectroscopy to fast analyze concentration of multiple gases including O2, CO, NH3, CO2, CH4, H2O, HCl, HF, HCN, H S, etc. Generally, one single analyzer can only measure one kind of component. The analyzer is ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Our model ESE-UV-500 model can measure SO2 based on DOAS and PLS,able to measure the concentration of gases including SO2,NO2, NO,NH3,CL2,O3,H2Setc,It has features of high measurement accuracy ,outstanding,reliablility,fast response time and wide applicable ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
CEMS has four basic parts: the dust monitoring subsystem, gaseous pollutants monitoring subsystem, flue gas parameter monitoring subsystem, system control, and data acquisition and a processing subsystem. It can monitor SO2, NOx, O2, dust, temperature, pressure, flow rate and other parameters such as HCl, HF, CO, CO2 for a particular occasion. After dedusting by sampling probe, tracing by ...
-
PremiumManufactured by Siemens Industry, Inc. - Process Analyticsbased in USA
The in-situ gas analyzer LDS 6 is characterized by a high availability and unique analytical selectivity and is optimally suitable for numerous applications. One or two signals from up to three measuring points are processed simultaneously by the central analyzer unit. The sensors are designed for operation under harsh environmental conditions and contain a minimum of electrical ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
The Continuous Emission Monitoring System (CEMS) EM-GAS-500 developed and produced by ESE is to monitor the total air pollutant emissions from stationary sources, mainly used for industrial boilers, power plant boilers, industrial furnaces emissions monitoring, SO2, NO,NO2, O2,CO,CO2,HCL,HF, H2O etc dynamic continuous monitoring, simultaneous to measure gas flow, oxygen content, gas pressure, gas ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Model 3400-WTR Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Tekran 3400 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long life. The Model 1306 can supply enough water for up to four CEM systems. The filter ...
-
PremiumManufactured by ENVEAbased in FRANCE
The QAL 260 series is suitable for measuring dust concentrations in Combustion, Incineration and other industrial stacks and is compliant with EN 14181. Having a 0-15 mg/m³ certification range, the QAL 260 sensor can be used at low or high dust levels. Due to dynamic ranging, the sensor is also suitable for much higher dust levels found in Power, Cement and Metals smelting ...
-
PremiumManufactured by Gasmet Technologies - a Nederman companybased in FINLAND
Analyzer for Oxygen Measurements: Gasmet oxygen analyzer is designed for continuous oxygen measurement of wet or dry flue gas. This extractive analyzer is suitable for various industrial applications where reliable and accurate oxygen measurement is ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
FT-3000 is a gas online continuous monitoring system based on fourier transform infrared spectroscopy, monitoring emission gas of SO2, NOx (NO NO2), CH4, NH3, HCl, HF, CO, CO2, O2, H2O and other components at the same time. According to user demand, the analyzer can be extended to measure SO3, N2O and etc. It has high accuracy, wide dynamic range, low detection limit and is suitable for ultra-Iow ...
-
PremiumManufactured by Testo, Inc.based in USA
The testo 316-3 is our best refrigerant leak detector yet, and delivers dependable, rugged performance at a great value. The heated diode sensor provides sensitivity down to 0.15 ounces/year including the new refrigerant blends like R-410A, R-407C, and R134-a, allowing you to quickly locate refrigerant leaks. Just turn it on and start getting readings immediately. Thanks to automatic zeroing, the ...
-
PremiumManufactured by Tekran Instruments Corporationbased in CANADA
The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For every installation, we have met and exceeded all performance requirements for our customer’s state and federal regulations. The Series 3400 is designed to measure total gaseous mercury emissions, ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A highly flexible range of high-precision flue gas oxygen analysers developed specifically for combustion analysis and control applications. Using AMETEK’s industry-proven zirconium oxide sensor technology, the WDG-1200/1210 range provides the world’s first fully-integrated, standalone flue gas oxygen analysers. The user interface is mounted onto the probe, lowering installation ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you