Flue Gas Sampling Equipment For Monitoring And Testing Available In Alabama
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
The unique sampling probe design is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas resistance; high precision temperature control, ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent traps provide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications. The IMR 400 is a 'stand-alone' system that works automatically. The ruseed wall mounted enclosure meets NEMAtype 4 (IP65) classification. The first step of the flue-gas conditioning process is filtering the gas sample. The filtered flue-gas enters the IMR 400 ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Maximum flue gas temperature: 600°C. Ambient operating temperature: -20°C to +80°C. Protection degree: IP65. Filtration chamber volume: 120 ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-300 explosion-proof sampling probe is for the explosion-proof occasions. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating units, etc..It has the feature of large filter area and capacity, good air tightness, high filtration precision, leak-proof design, low gas ...
-
PremiumManufactured by Hangzhou Chunlai Technology CO., Ltd.based in CHINA
GSP-200 high temperature sampling probe is an unique design product for the flue gas containing high dust and NH3HSO4 at temperatures below 190?crystalline solid cause clogging of piping in the field of escaping ammonia. It is applied to a variety of working conditions (high temperature, high humidity, high dust, high corrosion, etc.), supported with a variety of sampling tube, filter, heating ...
-
PremiumManufactured by ENVEAbased in FRANCE
Meets the US EPA Performances Standard 12 B mentioned in the US Portland Cement Rules and the new MATS (Mercury and Air Toxics ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
Manufactured by Hunan Senshang Instrument Co.,Ltdbased in CHINA
SPF223 sampling probe used in the systems for gas sampling, filtration and heating function, can effectively prevent the condensation of gas samples collected, unique structural design allows for a sampling system is more reliable, more small gas loss rate to ensure system stability and true. ...
-
Manufactured by Aer Sampling Inc.based in USA
Aer Sampling’s Borosilicate Glass Probe Liner for isokinetic sampling. Best suited for applications requiring a high stack temperature of up to 932 ºF (500 ºC). Probe Liner is the surface that actually comes into contact with the flue gas sampled from the smoke-stacks/chimneys. It is frequently used together with a Probe Heater and a Probe Sheath. The Probe Liner is inserted into ...
-
Manufactured by Zhejiang Tuna Environmental Science & Technology Co., Ltd.based in CHINA
FGD device. Our company imports the overseas advanced technology and can design and produce TME model mist eliminator according to the customer’s process ...
-
Manufactured by AMETEKbased in USA
Combustion gas measurements for NOx efficiency and product quality are especially challenging in the glass container manufacturing process. Two types of gas-fired furnaces exist that require post and pre combustion gas analysis. The glass furnace or 'melt-tank' is fired by conventional burners that mix pre-heated air and fuel in the burner nozzle. Ambient air leakage in the heat re-cooperation ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in pre-combustion and flue gas applications and provide air/fuel ratio ...
-
Manufactured by Aer Sampling Inc.based in USA
Versatile metering console (metric) for use in most sampling ...
-
Manufactured by Gardner Denver Thomas GmbHbased in GERMANY
Possible Applications; Gas Detection, Leak Detection, Patient Monitoring, Anesthesia Gas Control, Personal Air Sampling, Flue Gas ...
-
Manufactured by Nanjing Kelisaike Safety Equipment Co., Ltd.based in CHINA
KF300 Series Online Monitoring and Analysis System for Metallurgical Industry. Steel and other metals smelting will produce a large number of gases, and analytical measurement of these gases plays an exceedingly important role in the metallurgical plants’ production optimization, energy gas recovery, energy conservation and environmental protection, and security control. Free from the ...
-
Manufactured by Nova Analytical Systems Inc. - part of the Tenova Groupbased in USA
The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4 ...
-
Manufactured by Metlab Miljö ABbased in SWEDEN
The EVA Light Gas Probe is a heated glass probe with a filter holder for a 47 mm plane filter. The probe construction comply with the requirements of most international standards methods for flue gas samplings, i.e. acid gases (HCl, HF, SO2, SO3), ammonia, mercury and other metals and also for organic micro-pollutants (such as dioxins, PAH ...
-
Manufactured by ecom GmbHbased in GERMANY
Probe, sampling tubing, printer, transport case with carrying strap. Longlife sensors. CO sensor overload protection without measurement interruption. Electronic condensate monitoring. Low-maintenance, high-performance pump. TFT color display and backlit keypad. Powerful Lithium-Ion ...
-
Manufactured by ONUEE Electronics Ltdbased in CHINA
The design of the handheld combustion analyser "CHEMIST 500" is clean and ergonomic with an extremely clear and user-friendly keypad. "CHEMIST 500" immediately suggests just how even the most sophisticated engineering can give life to an incredibly comfortable and easy to use work instrument. Devised to analyse flue gases, monitor the pollutants emitted and measure environmental parameters, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you