Flue Gas Sampling Equipment For Monitoring And Testing Near Newfoundland
-
Manufactured by AMETEKbased in USA
Combustion gas measurements for NOx efficiency and product quality are especially challenging in the glass container manufacturing process. Two types of gas-fired furnaces exist that require post and pre combustion gas analysis. The glass furnace or 'melt-tank' is fired by conventional burners that mix pre-heated air and fuel in the burner nozzle. Ambient air leakage in the heat re-cooperation ...
-
Manufactured by Ohio Lumexbased in USA
The systemis designed for portability and ease of use to perform short term RATA sampling, CEM performance certifications, diagnostic studies for mercury control technologies, and baseline testing. This low cost, compact, and field-proven system is easy to learn and use. It is ideal for sampling mercury emissions based on EPA Reference Method 30B. The sampler is housed in a light-weight rugged, ...
-
Manufactured by Ohio Lumexbased in USA
MEGA is a low cost and compact multi-component gas analyzer with an integrated sample conditioner and probe stinger suitable for process monitoring and compliance monitoring and reporting. The flue gas sample flows through the probe and a short heated sample line to the analytical module for simultaneous measurement of multiple gases. Includes automatic calibration system for use with certified ...
-
Manufactured by AMETEK Process Instrumentsbased in USA
The CMFA-P2000 (Combustion Mix Flue Gas Analyzer) is a portable combination premix and flue gas analyzer, specifically designed to meet the dual furnace combustion of glass container manufacturing plants. Two analyzers in one, the CMFA-P2000 is a portable solution designed to measure both excess oxygen and excess fuel in pre-combustion and flue gas applications and provide air/fuel ratio ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent trapsprovide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
PremiumManufactured by Lumex Instrumentsbased in CANADA
Sorbent traps provide total mercury measurement as well as speciated mercury measurement (oxidized and elemental mercury phases). The flue gas sample is collected using a heated sample probe and calibrated pumping system. Mercury is captured by adsorption in sorbent traps media. The material in these traps is later analyzed using Zeeman mercury analyzer RA-915M and PYRO-915+ attachment. Traps are ...
-
Manufactured by Nova Analytical Systems Inc. - part of the Tenova Groupbased in USA
The Nova 320 Series of Portable Flue Gas Oxygen Analyzers utilize a reliable, stable oxygen sensor which responds quickly to the oxygen present in a flue gas sample. Its life expectancy is between 3 and 4 years. The sensor is very easy for the customer to replace and at a reasonable cost. A rechargeable battery provides enough power for the pump and electronics for about 8 hours of operation. The ...
-
Manufactured by Nova Analytical Systems Inc. - part of the Tenova Groupbased in USA
The Nova 310 Series Portable Flue Gas CO Analyzer utilizes a reliable, customer-replaceable electrochemical sensor which responds quickly to the CO present in the flue gas sample. Its life expectancy is between 3 and 4 ...
-
Manufactured by Nova Analytical Systems Inc. - part of the Tenova Groupbased in USA
The Nova 360 Series are portable analyzers that can provide a detailed analysis of flue gas composition. They have been designed to be accurate, reliable, and easy to use and maintain. The sensors respond quickly to the oxygen and carbon monoxide (CO) present in the flue gas sample. The typical sensor life expectancy is between 3-4 years and they are ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR 400 is a wall-mounted flue-gas dryer, and is designed to prepare flue-gases for a wide variety of gas monitoring applications. The IMR 400 is a 'stand-alone' system that works automatically. The ruseed wall mounted enclosure meets NEMAtype 4 (IP65) classification. The first step of the flue-gas conditioning process is filtering the gas sample. The filtered flue-gas enters the IMR 400 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Meets the US EPA Performances Standard 12 B mentioned in the US Portland Cement Rules and the new MATS (Mercury and Air Toxics ...
-
Manufactured by Gardner Denver Thomas GmbHbased in GERMANY
Possible Applications; Gas Detection, Leak Detection, Patient Monitoring, Anesthesia Gas Control, Personal Air Sampling, Flue Gas ...
-
Manufactured by MRW Technologies, Inc.based in USA
The term “thermal oxidizers” is used to describe equipment with a wide variety of applications, features, and complexity. MRW has extensive experience in designing and manufacturing thermal oxidizers for many industries, including gas processing, chemical & petrochemical, oil & gas production, petroleum refining, marine & terminal loading/storage, and steel & ...
-
Manufactured by Aer Sampling Inc.based in USA
Aer Sampling’s Borosilicate Glass Probe Liner for isokinetic sampling. Best suited for applications requiring a high stack temperature of up to 932 ºF (500 ºC). Probe Liner is the surface that actually comes into contact with the flue gas sampled from the smoke-stacks/chimneys. It is frequently used together with a Probe Heater and a Probe Sheath. The Probe Liner is inserted into ...
-
Manufactured by Aer Sampling Inc.based in USA
Versatile metering console (metric) for use in most sampling ...
-
Manufactured by Aer Sampling Inc.based in USA
The surface that actually comes into contact with the flue gas sampled from chimneys/stacks. Inserted into probe heater and then probe sheath to use. Order the right type to fit different configurations (Aer Sampling's Standard, Flexible, Handy) or different ...
-
Manufactured by Bambeck Systemsbased in USA
The Result of New Technology and Decades of Experience in Combustion ...
-
Manufactured by ecom GmbHbased in GERMANY
Probe, sampling tubing, printer, transport case with carrying strap. Longlife sensors. CO sensor overload protection without measurement interruption. Electronic condensate monitoring. Low-maintenance, high-performance pump. TFT color display and backlit keypad. Powerful Lithium-Ion ...
-
Manufactured by Instrumatic apsbased in DENMARK
The extractive dilution technique is the most widely used method for continuous emission monitoring of SO2 / CO2 in the USA ...
-
Manufactured by Metlab Miljö ABbased in SWEDEN
The EVA Light Gas Probe is a heated glass probe with a filter holder for a 47 mm plane filter. The probe construction comply with the requirements of most international standards methods for flue gas samplings, i.e. acid gases (HCl, HF, SO2, SO3), ammonia, mercury and other metals and also for organic micro-pollutants (such as dioxins, PAH ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you