Fourier Transform Infra Red (FTIR) Analyses Applications available in Germany
-
Premium
Continuous emissions monitoring solutions for mining & smelting
OPSIS non-contact monitoring solutions, based on either DOAS or TDL techniques, are very well suited for applications in the mining and smelting Industries, as the flue gas conditions often involve high temperatures and high dust ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Determination of fatty acid methyl ester (fame) content in diesel fuel or domestic heating fuel by MID-IR spectroscopy
Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN 14078:2014. Lumex Instruments provides user-friendly analytical ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Gas monitoring instruments and systems for titanium dioxide
Titanium dioxide is the most important white pigment used in the polymer industry. It is widely used, because it efficiently scatters visible light, thereby imparting whiteness, brightness, and opacity when incorporated into a plastic ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
FT-NIR spectroscopy in sugarcane liquor industry
Sugarcane was discovered in India between the 6th and 4th centuries BC by Persians. Today, sugarcane is the world's largest crop by production quantity. It is cultivated in more than 90 countries with Brazil, India and China as the top three producers. For centuries, sugarcane has been cultivated to produce sugar. Then its cultivation was expanded to produce liquors, and with today's technology, use of sugarcane is expanding into an extraordinarily diverse range of value-added products such as ethanol, ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Emissions monitoring for waste incineration
Process control and emission monitoring in a waste to energy plant is a challenge. A large number of gaseous components need to be measured with high accuracy. Almost 100% uptime is required and the monitoring system needs to be easy to maintain and fast to ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Gas monitoring instruments and systems for anesthetic gases
The anesthetic gases and vapors which leak into the indoor atmosphere during medical procedures are considered waste anesthetic gases (WAGs). The exposure is of relevance to thousands of professionals in hospitals, operating theaters, patient recovery rooms, dental offices, and veterinary clinics around the world, who may be continually exposed to the waste anesthetic gases during their workday. Typical gases of concern include nitrous oxide N2O and several halogenated compounds in vapor form, such as sevoflurane, ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for stack testing
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. Further requirements are set on the quality assurance of the installed measurement systems at the plants. The relevant standard in this regard is EN 14181:2004, the quality assurance of automated measuring systems. The standard dictates how to determine that the measurement systems installed for continuous emissions monitoring at a plant operate according to the directives ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers and monitoring systems for fire & material testing
Sampling and analysis of fire effluents is an important part of assessing both the environmental impact and the threat to life caused by fires. Detailed knowledge about the composition and concentration of fire effluents is required to gain a good understanding about the potential impacts of fires and for efforts to diminish these impacts. Testing the composition of these fire effluents presents a challenge for the analytical equipment used to measure the gases. The amount of species and concentrations of interest ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Determination of benzene in gasoline
Introduction Benzene is formed in gasoline in the process of oil refining and gasoline production. Determination of benzene in gasoline is an important task, because ben zene and its products reacting with the products of incomplete combustion of gasoline are highly toxic. Moreover, the presence of benzene increases fouling that eventually may damage the engine . Therefore, regulations impose lim it on the content of benzene in gasoline in many countries, and international standards exist to come up to this ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Gas analyzers and monitoring systems for First response
The first response encounters hazardous gases that need to be identified quickly. Gasmet manufactures portable and powerful gas analyzers for these crucial measurements. Measure a vast variety of gases simultaneously, on-site. Read about our solutions for First ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
FT-NIR analaysis for spices & raw ingredients sector
Spices are aromatic plant substances used primarily for flavoring, coloring, and preserving food. Their benefits are plentiful as they add few calories to food, can contribute vitamins, minerals, and antioxidants when used in sufficient quantity, and act as a natural preservative. The industry is large and diverse with one hundred and nine varieties recognized by ISO. However, most spices are produced by small scale farmers and imported all over the world, which can make quality monitoring a difficult task. ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Gas monitoring instruments and systems for DeNOx process control
In most combustion process atmospheric nitrogen reacts with oxygen in high temperature conditions to produce nitrogen oxides (NOx). Total NOx production is the sum of nitrogen monoxide NO and nitrogen dioxide NO2. The emissions of these gases are controlled through setting of emission limit values (ELVs) for power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Determination of fatty acid methyl ester (FAME) content in diesel fuel or domestic heating fuel by mid-IR spectroscopy
Introduction Presence of fatty acid methyl esters (FAME) in diesel fuel or domestic heating fuel (both hereinafter referred to as diesel fuel) is a signal of blending with biodiesel. The control of FAME content in diesel fuel is an essential and actual task because of the need of the right fuel identification and registration of possible FAME impact on engines and fuel systems. To control the compliance one of the most accurate, rapid and simple methods is EN ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Gas analyzers and monitoring systems for Compliance measurements
Several EU directives and national laws in European countries set requirements for continuous monitoring of flue gas emissions at power plants. The demand for emission measurements has only increased in recent years and the trend will undoubtedly continue. It is therefore increasingly important for power plants to have reliable information available on emission of air pollutants. A power plant’s license to operate can even depend on it. Because the reduction of emissions to desired levels requires ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for HAZMAT
Accidents involving chemicals and other hazardous materials require fast and accurate gas measurements as part of the first response. The Gasmet™ GT5000 Terra portable FTIR Gas Analyzer provides reliable identification and concentration measurements of hazardous gases in 60 seconds or ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for nitric acid process
Modern production method of nitric acid production may lead to generation of several different gaseous emission components, such as nitrogen oxides (NOx), ammonia NH3 and nitrous oxide N2O. Nitrogen monoxide is an intermediate gaseous product in manufacturing of nitric acid HNO3. NO is formed in a catalytic reaction between ammonia and molecular oxygen O2. But undesirable side reactions may result in formation of nitrogen dioxide NO2 and nitrous oxide N2O. The NO and NO2 emissions can be reduced by use of ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers and monitoring systems for container monitoring sector
In addition to miscellaneous products, shipping containers might contain toxic gases that present health hazards for workers opening or unloading them. Gasmet manufactures portable and powerful gas analyzers for measuring these hazardous gases inside enclosed spaces. With our solutions, you can measure vast variety of gases simultaneously in ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas analyzers and monitoring systems for Power plants
Power plants are industrial facilities used to generate electric power with the help of one or more generators which convert different energy sources into electric power. Power plants need to monitor emissions continuously according to local emission regulations. Read about our solutions for the power ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Gas monitoring instruments and systems for compressed breathing air
Compressed breathing air is subject to strict limits of harmful contaminants defined in European standard EN 12021 and various defence standards such as DEF STAN 68-284 issue 3. The testing interval of breathing air compressors and associated equipment is 3 months and gases tested include carbon monoxide, carbon dioxide and oil vapour defined as hexane and heavier hydrocarbons. EN 12021 covers underwater applications including self-contained open circuit compressed gas breathing (SCUBA) and compressed gas line ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Emissions Monitoring for Steel Mills
Steel mills include a multitude of activities that generate gaseous emissions. Besides continuous emissions stack monitoring, the applications in a steel mill also include process mesaurements that provides important data to the operators in order to optimize the steel making ...
By OPSIS AB based in Furulund, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you