Fuel Flowmeter Articles

  • Cemex plant Ruedersdorf - Case Study

    CEMEX Deutschland AG is one of the biggest producers of ready-mixed-concrete, cement and minerals. In Germany CEMEX employs a staff of approximately 3,200 people and is part of the International CEMEX Group with a head count of 50,000. After the German re-unification the Company acquired the existing cement plant in Ruedersdorf. Investments to save CEMEX invested ...

  • New Boliden Rönnskär Zinc Furnace - Case Study

    Rönnskär plant NEW BOLIDEN is the third largest copper metals supplier in Europe and handles all process stages from mining via smelting until recycling for copper, zinc and other valuable metals. The Rönnskär plant located in Skelleftehamn in northern Sweden houses one of the largest copper smelters of its kind in the world. Beside copper zinc, clinker, lead and precious ...

  • Wastewater Plant Relies on Thermal Flow Meter for Co-Gen Power Gas Blending Process

    The Rahway Valley Sewerage Authority (RVSA), which operates a large wastewater treatment plant in New Jersey, embarked on a green co-generation waste-to-energy project to power a portion of its operations. The plant performs primary, secondary, tertiary and sludge treatment processes in serving over 250,000 residential customers and 3000 industrial and commercial customers in a 40-plus square ...


    By Modern Pumping Today

  • OptiSaveTM installation for sea and freshwater pumps onboard “Johann Jacob”

    Ernst Jacob (GmbH & Co KG) - a German ship manager and owner of 11 ships all providing safe and environmentally friendly service of consistent quality - decided to save as much energy as possible. DESMI has signed an agreement to continuous install the energy saving system OptiSaveTM on board all the 11 vessels of Ernest Jacob. The Challenge “Back in 2014 the fuel ...


    By DESMI A/S

  • Oil refinery vapour gas case study

    1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude ...

  • Case study: Hunters Point

    In Situ Thermal Remediation with Gas Thermal Remediation (GTR©) is being used to remove NAPL contaminants from a former military base. The system is extracting nearly 1,000 liters of liquid waster every week. LNAPLs, such as fuel and oils, and DNAPLs, such as PCBs and chlorinated solvent, are being removed from the subsurface to make way for a residential homes. In Situ+NAPL ...

  • Waste Fuel Case History

    The Customer The company engages in the design, manufacture, and sale of machinery for decomposing petroleum-based materials. The company uses microwave technology for recovering hydrocarbons and fossil fuels from sources, such as tires, oil shale, capped wells, coal, automotive shredded residue, municipal solid waste, shale deposits, and waste oil streams. The ...

  • Estonia eager to teach world about oil shale

    AUVERE, Estonia (AP) — Home to the creators of Skype and the first country to use online voting, Estonia relishes its image as a technological pioneer. But the tiny East European country's most far-reaching economic achievement could come from how it has learned to squeeze oil from a rock. About 200 feet (60 meters) below ground in northeastern Estonia, very close to the Russian border, ...


    By Associated Press

  • Transforming an oil tank into a clean water tank - case study

    It would be an almost impossible task, many would claim, to turn an 86 diameter large Orimulsion 400 tank, that has been out of service for years, into a clean watertank. But this was whatEcologica was contracted to do for their client ENELS.p.A. ENEL S.p.A. chose Italian-based Ecologica S.p.A. as service provider for this tank clean atthe ENEL Central e Federico power plant in Brindisi as they ...


  • Helping veolia transform waste into bio-fuel case study

    LIPODAN, a VEOLIA company, is a plant for recycling grease, food grease and used oil which is collected from restaurants, from gas stations, car garages, bus companies and similar locations. The plant treats 12,000 Tons of organic oils and 6,000 Tons of mineral oil per year. For recycling, the plant is using the LIPOVAL process. The oils are first converted to LIPOFIT, an ...

  • A big help in daily business - Case Study

    The Statoil service centre Brabrand is situated on the outskirts of Århus, Denmark’s second largest city, close to a busy road leading into the town centre. Besides selling fuel the station also sells convenience supplies. Goods usually arrive in cardboard boxes, which are unpacked and moved into the shop area by the staff, leaving large amounts of waste which needs to be moved out of ...


    By Bramidan Balers

  • Applications guide to mass flow measurement in the power industry

    Precise, timely measurement of air, fuel, and gases is one way today's utilities can take action to protect themselves against rising costs and comply with increasingly stringent environmental requirements. Sierra thermal mass flow meters and control systems are designed expressly to fill these needs. They can make utilities more cost-effective in a variety of applications: Real-Time Fuel Line ...


    By Sierra Instruments, Inc.

  • Fuel Polishing & Transfer Systems

    Earlier this year, Algae-X International came out with a totally new line of Fuel Polishing & Transfer Systems designed and built there in Fort Myers, Florida facilities. By listening to its customers, boat builders and yacht owners alike, Algae-X found out what they wanted to have as an on board fuel optimization package. The design is modular, so the right system can be chosen for each ...


    By AXI International

  • Time for Plan B: Cutting carbon emissions 80% by 2020

    When political leaders look at the need to cut carbon dioxide emissions to curb global warming, they ask the question: How much of a cut is politically feasible? At the Earth Policy Institute we ask a different question: How much of a cut is necessary to avoid the most dangerous effects of climate change? By burning fossil fuels and destroying forests, we are releasing greenhouse gases, ...


    By Earth Policy Institute

  • Maxsys churns out 7.5% fuel consumption savings at leading UK cheese producer

    The First Milk Cheese Company’s Haverfordwest creamery has fitted the Maxsys Fuel energy saving systems to its three oil fired steam-raising boilers resulting in an impressive 7.5% fuel consumption saving and a return-on-investment in less than one year. First Milk is the UK’s largest dairy farming co-operative. The £500 million turnover business has three operating divisions: ...


    By Maxsys Fuel Systems Ltd

  • Oil and Gas Development - Onshore Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you