Fume Hoods Equipment For Monitoring And Testing
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Set new standards for digestion speed, flexible use and result reproducibility with the IR SpeedDigester. Achieve higher sample throughput for nitrogen determination by Kjeldahl digestion and multiply functionality with this entry level IR ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The SFC-50 from Sepiatec is a compact and easy-to-use chromatography system for preparative separations on small columns by means of supercritical fluid chromatography (SFC). The system offers the comprehensive benefits of SFC technology, such as faster separations, lower costs due to reduced consumption of organic solvents, as well as being more environmentally friendly at increased ...
-
PremiumManufactured by Testo, Inc.based in USA
The CEC compliant testo 420 air flow capture hood with Bluetooth is the accurate, lightweight, and convenient solution for measuring volume flows at supplies and returns. Handling this air flow capture hood with its flow straightener and tiltable display is especially easy, with its low weight of less than 6.4 lbs, 24" x 24" included hood dimensions, and ergonomic ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
Provides required air flow for Vulcan Duo system and portable fume hood. 200 CFM air ...
-
PremiumManufactured by Fluxana GmbH Co. KGbased in GERMANY
The VITRIOX® GAS is a gas operated fusion machine with cold to cold automation and up to 6 positions that can operate simultaneously. lts technology is based on many years experience in XRF fusion and ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Fitting to your needs and environment. Perform any flash or prep HPLC application easily and safely with our extremely compact Pure Chromatography Systems. The Pure platform is fitting to your needs and environment and offers maximal user and sample safety, while using minimal ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
As the first freeze dryer with Infinite-Control™, the compact Lyovapor L-200 offers unparalleled automation in sublimation. Easily create and run methods, log data, record charts in real-time and interact from anywhere at anytime with mobile ...
-
PremiumManufactured by Labconco Corporationbased in USA
FreeZone Triad Benchtop Freeze Dryers are designed for multiple types of lyophilization: flask, bulk and stoppering vials. With the ability to freeze dry samples in so many different forms, the Triad's versatility and compact design make it perfect for busy ...
-
PremiumManufactured by Concept Smoke Systems | Concept Engineering Ltd.based in UNITED KINGDOM
The AFM-NEO cleanroom foggers use high performance transonic piezoelectric ceramics to generate what is considered in its class an unmatched 1,25 m3 of pure fog per minute with 170ml of fog density per minute to provide 5-7m of visible air flows for smoke studies in cleanrooms, medical rooms. ISO suits, barrier isolators, fume hoods and similar applications in cleanrooms. The AFM-NEO series is ...
-
PremiumManufactured by WTW - a xylem brandbased in GERMANY
inoLab benchtop devices offer the correct solution for pH, ORP, dissolved oxygen and conductivity measurements in the ...
-
PremiumManufactured by HI-Q Environmental Products Company, Inc.based in USA
HI-Q is ready to help with your stack sampling requirements: State and Federal nuclear regulatory agencies require a stack discharge sampling program as part of the licensing process. Radionuclides discharged to the air in the form of particulate and volatile compounds must be assayed. Therefore, nuclear facilities are required to follow standard protocol for sampling their effluent. Possible ...
-
PremiumManufactured by Labconco Corporationbased in USA
The Protector XStream Laboratory Hood takes containment, safety and energy savings to the extreme. This general chemical, high performance fume hood was independently tested and challenged well beyond the SEFA-1 standards. With a face velocity of 40 fpm and sash fully open, the Protector XStream was subjected to 50 fpm cross drafts, NIH protocol, and tracer gas measurements in the chest of the ...
-
PremiumManufactured by Questron Technologies Corporationbased in CANADA
Each QBlock is equipped with its own Separated Controller to be used outside of fume hood protected from heat and acid. Complete flexibility – QBlocks available for a Variety of Vials and liners. Unique heating elements for providing Uniform Heating that reaches adequate temperatures for tri-acid treatment. Each off-the-shelf Qblock comes with a Tray and Tray-Holder. 230 °C, 50 mL, 56 ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
The compact Lyovapor L-200 offers high-quality Freeze Drying (-55 °C, 6 kg) with a high level of automation. Infinite-Control includes easy method creation, method running, data logging, chart recording in real-time and interruption if needed from anywhere at ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Premier Laboratory Hoods incorporate a sleek interior with a molded one-piece fiberglass liner, the signature feature of Labconco’s leading line of fume hoods since 1961. The one-piece liner of specially-formulated, fiberglass-reinforced polyester offers corrosion and fire resistance and easy clean up. Without seams, the interior has fewer points of deterioration for longer ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Controlled Atmosphere Glove Boxes provide a leak-tight environment to perform work with contamination-sensitive materials under vacuum or in an inert environment. Fiberglass-lined models are performance tested to maintain oxygen levels a low as 0.4 ppm and moisture levels as low as 2 ppm. Stainless steel-lined models are performance tested to maintain oxygen levels as low as 0.2 ppm and ...
-
PremiumManufactured by Labconco Corporationbased in USA
Protector Downdraft Powder Stations keep users safe by containing fingerprint powders during processing. The open-sided, open-top workstation provides unrestricted operator movement and accommodates oversized evidence. Available in 2' and 3' widths, two or more workstations may be placed side-by-side to achieve an unlimited number of width combinations. An optional Transition Connector mounts ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
First lab Freeze Dryer for continuous sublimation. With Infinite-Technology, the Lyovapor L-300 is the first lab freeze dryer for continuous sublimation thanks to two alternately working condensers that are automatically cleaned. In addition, control the entire process remotely via mobile devices. ...
-
PremiumManufactured by BUCHIbased in SWITZERLAND
Four steps for occupational safety. With four steps to occupational safety, Scrubber K-415 provides you with maximal protection. The unit neutralizes poisonous fumes and reaction gases and minimizes use of cooling water to safeguard both you and the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you