Fume Monitoring Articles

  • Updated White Paper Describes How Weighing on a Precision Balance is Faster and More Precise with SmartPan

    "Outstanding Weighing Performance Even Under Harsh Conditions", the recently updated White Paper from METTLER TOLEDO, explains how SmartPan™, a new design of weighing pan for precision balances or scales, permits a more precise stable weighing result to be achieved in half the time. An outstanding 86% improvement in precision and 50% increase in speed was recorded under the most extreme ...


    By Mettler - Toledo Int. Inc

  • BTC coatings for trouble-free Boiler Operation

    In April 2014, the CastoLab® Division of Eutectic Canada performed an on-site coating contract for a Steel Mill. The work was performed on a critical section of the Fume Extraction Ducting: a series of water cooled tubes which remove heat from the exhaust fumes exiting the drop box. Conveyed within the ducting is hot ash debris which is corrosive and very abrasive. In this particular job, the ...


    By Castolin Eutectic

  • Exceeding expectations: Safer and better – for all!

    Elkem has production facilities worldwide and is a global leader in environment-friendly production. In order to reduce emissions to a minimum and increase the employee’s safety at the facilities, Elkem cooperate with NEO Monitors. At Elkem's plant in Salten, Norway, silicon is produced from quartz in a high temperature process using coal and coke as reducing agents. The silicon is ...


    By NEO Monitors AS

  • Engineering Expertise for a Diamond Mine in Canada`s Far North

    When Fabricated Plastics Limited of Maple, Ontario was invited to quote on some work for a diamond mining company in Canada's North West Territories, they were naturally intrigued by such a high interest project. The world of diamonds immediately conjures up exciting thoughts of exotic locations and immense wealth. In fact, the long, complex and arduous task of identifying diamond deposits, the ...


    By Fabricated Plastics Limited

  • WHO report on diesel fumes puts sharp focus on need for effective monitoring

    The World Health Organisation this month reclassified the dangers of diesel exhaust fumes, upgrading the risk from probably carcinogenic to a definite cause of cancer. The WHO report is based on the findings of research on workers in high risk areas, and puts a sharp focus on the need for effective monitoring in industries such as mining, rail, transportation, construction, power generation and ...


    By Shawcity Limited

  • Welding Fumes and the effects of Manganese

    The potential risks of welding operations include the potential to breathe in metal fumes and toxic gases. Fume particles are formed from the vaporisation of molten metal that occurs during the process. These particles are very fine in size and may join together to form larger particles.. The biggest risk is exposure to the manganese contained in fumes that are given off during welding. ...


    By Shawcity Limited

  • Detection of 2,4-D in citrus juice

    MATRIX: Fresh squeezed fruit juice, canned 100% fruit juice or frozen juice concentrates of citrus fruits ANALYTES: 2,4-Dichlorophenoxyacetic acid (2,4-D) RANGE OF DETECTION: 10 to 500 ppb in juice or 40 ppb to 2 ppm in juice concentrates MATERIALS: 2,4-D RaPID AssayÒ Kit and Sample Diluent. Reagents: methylene ...


  • Decontamination of fume hood contaminated with tritiated thymidin

    Background Contaminated in 2003 with Tritiated-Thymidine Inadvertently volatilized From 2003 to 2007, have been attempting decon Still contaminated after almost monthly attempts Tried both soap/water and Radiacwash RSO will not release until counts are at background Proposed Solution ...


    By METIS Scientific

  • 1st coating of DeconGel 1101 on concrete, carbon steel, stainless steel, and plexiglas coupons contaminated with AM-241, Pu-239, and Cs-137

    Radionuclide Solutions The radionuclide solutions used to contaminate these coupons are NIST traceable. The Am-241 solution was prepared from AmCl3 dissolved 1 N HCl. The Pu-239 solution was prepared from Pu(NO3)4 dissolved in 4 M HNO3. The Cs-137 solution was prepared from CsCl dissolved in 0.1 M HCl. I have included all Certificates of Calibration for the stock solutions. For all solutions, a ...


    By METIS Scientific

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you