Gas Alarms Equipment For Monitoring And Testing Available In Palau
-
PremiumManufactured by Fluid Components International LLC. (FCI)based in USA
The FS10i is a universal flow switch and flow monitor designed for simple insertion into ½” (13mm) or larger diameter pipes and square ducts. The unit is suitable for either liquid or air/gas applications. It is fast responding and highly repeatable to both increasing and decreasing flow rate changes. The standard 1A relay trip point is easily set in the field for low or high trip ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Test set SPE for testing and adjustment of SEWERIN measuring devices. With regard to operational safety, test technology continues to grow in importance. The DVGW (German Technical and Scientific Association for Gas and Water) Code of Practice G 465-4 describes the tests required for various device classes. The Sewerin test sets take these circumstances into account. For example, all test sets ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MultiSafe-MX system is intended for the protection of high hazard, high risk plant and facilities. The MultiSafe-MX is certified, by European laboratories, to comply with the applicable regulations. The panel is composed of dedicated cards, installed in 19” racks which have their own “intelligence”, programmed for active/passive fire protection, gas detection, intruder ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
An attractive solution for gas and flame detection needs, the MX 62 is a modular and flexible controller that is easy to install and reduces operational costs. The MX 62 system meets the requirements of ATEX 100 A and offers the high level of security required by SK2 and SIL3 rated ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MX 52 control unit allows various detectors to be connected and monitored. Any gas detector from Teledyne Gas and Flame Detection or any other 4-20 mA device can be monitored and controlled. The modular design and flexibility enable this MX 52 gas detection equipment to be adapted to your exact ...
-
PremiumManufactured by IMR Environmental Equipment, Inc.based in USA
The IMR IX176 portable single gas detector can make continuous detection to combustible and toxic gases. It is suitable for combustible and toxic gas leakage detection in underground pipe or mines. It keeps the workers safe and helps prevent the facilities from being destroyed. It has a high-quality sensor, and uses natural diffusion as the method for detection. It has high sensitivity and ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The test sets to gas concentration measuring and gas warning devices of the EX-TEC PM 5xx/400 series. The test sets ATS 503 and ATS 501 can be used to carry out device inspections and adjustments to gas concentration measuring devices EX-TEC® PM 580, 550, 500 and 400 reliably and extremely ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The controller is easy to configure and is user friendly. Measurement ranges in engineering units, adjustable alarm set-points, optional serial interfaces, and many other features offer flexibility to meet most demanding ...
-
PremiumManufactured by CO2Meter, Inc.based in USA
The CO2 Multi-Sensor Safety System is designed to monitor carbon dioxide gas levels and detect leaks of higher concentrations using CO2 gas detection alarm systems. This device can monitor carbon dioxide levels and detect leaks protecting facilities and offices from over ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
We introduce the new MX 32, a controller that takes analog & digital inputs and covers all needs for a wide variety of applications. The MX 32 is a compact, low-profile controller that continuously monitors gas detection and more generally any 4-20 mA, MODBUS RS485 signal from compatible ...
-
PremiumManufactured by Environics, Inc.based in USA
This "On Demand" gas delivery and blending system will provide cost savings and repeatability of your gaseous atmosphere. The Environics® Series 3000 gas delivery/blending system offers on-site gas blending of 100% pure bulk gases and is configured to provide a solution to using costly premixed cylinders of gas. Unlike premixed cylinders, the Environics Computerized Gas Panel provides a ...
-
PremiumManufactured by Reef Industries, Inc.based in USA
Locate, identity and protect gas and oil lines from unwanted dig-ins by installing Terra Tape underground warning tape over your buried gas lines. This underground warning tape will provide continuous protection, alerting workers to stop digging. Terra Tape® is available in detectable as well as non-detectable grades. Standard APWA color coded yellow tapes are available in a variety of stock ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
Teledyne Gas and Flame Detection has designed the SURVEYOR 4B as a monitoring apparatus specifically designed to ensure the safety of boiler plants, battery charging rooms or small units where your operations are at risk due to the possibility of flammable gas leaks. Developed for quick, safe detection, the SURVEYOR 4B control module combines highly reliable monitoring, simple implementation and ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Detecting, measuring and warning - Everything you need. Portable gas concentration measuring device for detecting, measuring and warning. The mobile gas measuring and gas warning devices from the EX-TEC PM 5xx series make the everyday work of gas fitters, maintenance staff and other technical staff easier. They can be used to locate leaks in freely accessible gas pipes, assess the risk of ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
The EX-TEC PM 400 is a mobile gas warning device that reliably warns plumbers, staff from utility companies, network operators, fire services and other technical staff of dangerous gas concentrations. The compact device is available with various sensors and, even in its most basic version, allows you to monitor flammable gases. The range of gases that can be detected make the EX-TEC PM 400 ...
-
PremiumManufactured by ENVEAbased in FRANCE
Perfectly adapted to monitor the efficiency of different Mercury Removal Units (MRUs) in natural gas processing plants. Each mercury on-line system will differ in sample characteristics as well as installation conditions and operating environment. We have the experience to design systems that fully meet the requirements of your particular mercury monitoring ...
-
PremiumManufactured by Teledyne Gas and Flame Detectionbased in FRANCE
The MX 16 is a compact digital or analog controller, one input, low-profile controller that continuously monitors gas detection, like: O2, CO2, CH4, H2, LPG. Specially designed for applications in laboratory, storage, small boiler room, and breweries or battery charging rooms, the MX 16 measuring unit prevents the risks of explosion linked to the presence of toxic, anoxic and explosive gases in ...
-
PremiumManufactured by Hermann Sewerin GmbHbased in GERMANY
Multiple gas warning device with catalytic sensor and nonane certification. The Multitec 410 is the latest addition to the Sewerin range of multiple gas warning devices. Unlike the Multitec 5xx devices, the Multitec 410 has a catalytic sensor, also known as a catalytic combustion sensor, for measuring flammable ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you