Gas Alarms Equipment For Monitoring And Testing Near Newfoundland
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEW4 series is a microprocessor-based up to 4 channels multigas wireless detection and control system that can be used with the wireless CO and NO2 GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a 900 MHz or 2.4 GHz wireless ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The ACME CEL-4 QuadSet series is a microprocessor-based up to 4 channels multigas detection and control system that can be used with GasPost sensors. The communication between the Control Panel and the remote Sensor-Transmitters is accomplished through a true RS485 daisy chain communication ...
-
based in USA
Each CEMSentry™3000 sample control system incorporates a series of valving to control of automatic daily calibrations, local (analyzer) and remote (probe) cal gas introduction, flow meters, temperature controllers, sample pumps, vacuum & pressure gauges, filters, alarms and gas conditioners. The sample control system is critical for accurate gas analysis. Our years of experience provide ...
-
Manufactured by QED Environmental Systems, Incbased in USA
Introducing our new fixed gas analysis system, the BIOGAS 3000! Primarily for the Anaerobic Digestion (AD) biogas and bio-methane upgrading market, the BIOGAS 3000 has been designed to enable site operations to maximize gas production yield and protect expensive capital equipment from the damaging contaminant gases contained within the production process. The key to high performance is built on ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The BIOMETHANE 3000 is designed for high accuracy methane and oxygen readings for biomethane ...
-
Manufactured by QED Environmental Systems, Incbased in USA
The new ATEX certified BIOGAS 3000 builds on field-proven, robust gas analysis technology to offer cost effective online monitoring with local data ...
-
Manufactured by Redkoh Industries, Incbased in USA
The Model DT3006 measures oxygen and total combustibles or carbon monoxide by using an eduction system to draw a sample from a stack or duct over a relatively short distance to a pair of sensing cells. The first cell is a Zirconia sensor for measuring the oxygen. The second is either a platinum catalytic bead sensor for total combustible or an electrochemical sensor for carbon monoxide. The ...
-
Manufactured by AGC Instruments Ltd.based in IRELAND
The Series 5X00-PZ analyser is for use in hazardous Zone 1 and Zone 2 areas. Housed in a purged enclosure under the control of Gönnheimer Purge Controllers, the ATEX units have ‘Ex-Protection Bypass’ controls. The enclosures contain a custom-designed tray which slides out for easy access to the AGC Series 50 Analyser ...
-
Manufactured by Cambridge Sensotec Limitedbased in UNITED KINGDOM
The Cambridge Sensotec SF6 Fixed Detection System is a wide area monitoring solution to ensure safety for personnel working in, or who have access to, rooms that contain high voltage switchgear, circuit breakers and transformers where SF6 is at high pressure; it is important to monitor for leaks ...
-
Manufactured by American Gas & Chemical Co. Ltdbased in USA
The SBG-200 is an affordable solid-state completely self-contained monitor capable of detecting a variety of toxic and flammable gases and vapors. Several sensors are available which allow it to be calibrated to alarm at gas concentrations well below their lower explosive limit or OSHA ...
-
Manufactured by Delphian Corporationbased in USA
The SafeCAL module installs in a Class ABCD (FMRC) conduit box with a glass dome. A Delphian sensor attaches through gold plated keyed connectors and a weather-proof fitting for easy installation and reliable operation. The entire system is sealed. All calibration is completed without opening the explosion-proof housing. SafeCAL will endure temperatures from -40oC (-40oF) to +85oC (+185oF). It ...
-
Manufactured by Delphian Corporationbased in USA
The Delphian Determinator (Fixed Point Infrared) sensor is a smart infrared hydrocarbon gas detector. It has no moving parts. It displays gas concentrations up to and above 100% LEL including over-range (above 120% LEL) concentrations up to 999% LEL. It can determine which hydrocarbon gas is being detected and transmit a 4-20 mA signal proportional to the LEL concentration of that gas or vapor. ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
The GasSens A14/A11 Modular Gas Detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. From chemical and petrochemical plants to food processors, the GasSens system can be applied to the simplest or most complex gas detection application. Economical and low maintenance, this system is your best choice for reliable gas leak ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
ATI’s Series B14 Receivers are compact electronic modules that provide local alarm, display, and signal retransmission functions for gas detection systems. The modules are designed to accept input from either two, three, or four wire 4-20 mA transmitters located up to 10,000 feet from the receiver. They’re ideally suited for use with ATI’s Series A12 or B12 two-wire toxic gas ...
-
Manufactured by Analytical Technology - a brand by Badger Meterbased in USA
The B12 gas detector is a flexible component system providing a variety of options to meet individual gas detection and alarm requirements. Series B12 transmitters are loop-powered instruments that transmit a 4–20 mA signal linearly proportional to gas concentration. The B12 detection systems consist of individual modules that can be located where required. Sensor/transmitters, located in ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Universal Point Gas Detector Accepting Combustible (Infrared or Catalytic), Toxic, and Oxygen Gas ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Universal Point Gas Detection System Accepting Combustible (Infrared or Catalytic), Toxic, and Oxygen Gas ...
-
Manufactured by Sensidyne Industrial Health and Safetybased in USA
Industry-proven open path gas detection for line of sight ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
The FA200 Alarm Bar is part of the MeshGuard system for hazardous gas detection. The alarm device comes with one audible and four visual alarm outputs, and the alarm logic is fully configurable from the FMC 2000 multi-channel ...
-
Manufactured by RAE Systems - a Honeywell Companybased in USA
This full-featured single-gas monitor is compact and light enough to clip onto a uniform or belt, which provides personal protection in a range of environments. The ToxiRAE II continuously displays gas concentration, short-term exposure limit (STEL), time-weighted average (TWA), and peak values for one of more than 10 toxic gases, or users can elect to measure for sufficient oxygen. With an ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you